2023-04-21  Lulu Cheng  <chenglulu@loongson.cn>

	Backported from master:
	2023-04-18  Lulu Cheng  <chenglulu@loongson.cn>

	* doc/extend.texi: Add section for LoongArch Base Built-in functions.

2023-04-21  Andrew MacLeod  <amacleod@redhat.com>

	Backported from master:
	2023-04-20  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/109564
	* gimple-range-fold.cc (fold_using_range::range_of_phi): Do no ignore
	UNDEFINED range names when deciding if all PHI arguments are the same,

2023-04-20  Alejandro Colomar  <alx.manpages@gmail.com>

	* doc/extend.texi (Common Function Attributes): Remove duplicate
	word.

2023-04-19  Christophe Lyon  <christophe.lyon@arm.com>

	Backported from master:
	2023-04-19  Christophe Lyon  <christophe.lyon@arm.com>

	* doc/install.texi (enable-decimal-float): Add AArch64.

2023-04-18  Kito Cheng  <kito.cheng@sifive.com>

	Backported from master:
	2023-04-18  Kito Cheng  <kito.cheng@sifive.com>

	* doc/extend.texi (Target Builtins): Add RISC-V Vector
	Intrinsics.
	(RISC-V Vector Intrinsics): Document GCC implemented which
	version of RISC-V vector intrinsics and its reference.

2023-04-18  Richard Biener  <rguenther@suse.de>

	Backported from master:
	2023-04-18  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/109539
	* gimple-ssa-warn-access.cc (pass_waccess::check_pointer_uses):
	Re-implement pointer relatedness for PHIs.

2023-04-17  Martin Jambor  <mjambor@suse.cz>

	PR ipa/107769
	PR ipa/109318
	* cgraph.h (symtab_node::find_reference): Add parameter use_type.
	* ipa-prop.h (ipa_pass_through_data): New flag refdesc_decremented.
	(ipa_zap_jf_refdesc): New function.
	(ipa_get_jf_pass_through_refdesc_decremented): Likewise.
	(ipa_set_jf_pass_through_refdesc_decremented): Likewise.
	* ipa-cp.cc (ipcp_discover_new_direct_edges): Provide a value for
	the new parameter of find_reference.
	(adjust_references_in_caller): Likewise. Make sure the constant jump
	function is not used to decrement a refdec counter again.  Only
	decrement refdesc counters when the pass_through jump function allows
	it.  Added a detailed dump when decrementing refdesc counters.
	* ipa-prop.cc (ipa_print_node_jump_functions_for_edge): Dump new flag.
	(ipa_set_jf_simple_pass_through): Initialize the new flag.
	(ipa_set_jf_unary_pass_through): Likewise.
	(ipa_set_jf_arith_pass_through): Likewise.
	(remove_described_reference): Provide a value for the new parameter of
	find_reference.
	(update_jump_functions_after_inlining): Zap refdesc of new jfunc if
	the previous pass_through had a flag mandating that we do so.
	(propagate_controlled_uses): Likewise.  Only decrement refdesc
	counters when the pass_through jump function allows it.
	(ipa_edge_args_sum_t::duplicate): Provide a value for the new
	parameter of find_reference.
	(ipa_write_jump_function): Assert the new flag does not have to be
	streamed.
	* symtab.cc (symtab_node::find_reference): Add parameter use_type, use
	it in searching.

2023-04-17  Philipp Tomsich  <philipp.tomsich@vrull.eu>
	    Di Zhao  <di.zhao@amperecomputing.com>

	* config/aarch64/aarch64-tuning-flags.def (AARCH64_EXTRA_TUNING_OPTION):
	Add AARCH64_EXTRA_TUNE_NO_LDP_COMBINE.
	* config/aarch64/aarch64.cc (aarch64_operands_ok_for_ldpstp):
	Check for the above tuning option when processing loads.

2023-04-17  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/109524
	* tree-vrp.cc (remove_unreachable::m_list): Change to a
	vector of pairs of block indices.
	(remove_unreachable::maybe_register_block): Adjust.
	(remove_unreachable::remove_and_update_globals): Likewise.
	Deal with removed blocks.

2023-04-16  Jeff Law  <jlaw@ventanamicro>

	PR target/109508
	* config/riscv/riscv.cc (riscv_expand_conditional_move): For
	TARGET_SFB_ALU, force the true arm into a register.

2023-04-15  John David Anglin  <danglin@gcc.gnu.org>

	PR target/104989
	* config/pa/pa-protos.h (pa_function_arg_size): Update prototype.
	* config/pa/pa.cc (pa_function_arg): Return NULL_RTX if argument
	size is zero.
	(pa_arg_partial_bytes): Don't call pa_function_arg_size twice.
	(pa_function_arg_size): Change return type to int.  Return zero
	for arguments larger than 1 GB.  Update comments.

2023-04-15  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/109154
	* tree-if-conv.cc (predicate_scalar_phi): For complex PHIs, emit just
	args_len - 1 COND_EXPRs rather than args_len.  Formatting fix.

2023-04-15  Jason Merrill  <jason@redhat.com>

	PR c++/109514
	* gimple-ssa-warn-access.cc (pass_waccess::check_dangling_stores):
	Overhaul lhs_ref.ref analysis.

2023-04-14  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/109502
	* tree-vect-stmts.cc (vectorizable_assignment): Fix
	check for conversion between mask and non-mask types.

2023-04-14  Jeff Law  <jlaw@ventanamicro.com>
	    Jakub Jelinek  <jakub@redhat.com>

	PR target/108947
	PR target/109040
	* combine.cc (simplify_and_const_int_1): Compute nonzero_bits in
	word_mode rather than mode if WORD_REGISTER_OPERATIONS and mode is
	smaller than word_mode.
	* simplify-rtx.cc (simplify_context::simplify_binary_operation_1)
	<case AND>: Likewise.

2023-04-14  Jakub Jelinek  <jakub@redhat.com>

	* loop-iv.cc (iv_number_of_iterations): Use gen_int_mode instead
	of GEN_INT.

2023-04-13  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/108139
	PR tree-optimization/109462
	* gimple-range-cache.cc (ranger_cache::fill_block_cache): Remove
	equivalency check for PHI nodes.
	* gimple-range-fold.cc (fold_using_range::range_of_phi): Ensure def
	does not dominate single-arg equivalency edges.

2023-04-13  Richard Sandiford  <richard.sandiford@arm.com>

	PR target/108910
	* config/aarch64/aarch64.cc (aarch64_function_arg_alignment): Do
	not trust TYPE_ALIGN for pointer types; use POINTER_SIZE instead.

2023-04-13  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/109491
	* tree-ssa-sccvn.cc (expressions_equal_p): Restore the
	NULL operands test.

2023-04-12  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	PR target/109479
	* config/riscv/riscv-vector-builtins-types.def (vint8mf8_t): Fix predicate.
	(vint16mf4_t): Ditto.
	(vint32mf2_t): Ditto.
	(vint64m1_t): Ditto.
	(vint64m2_t): Ditto.
	(vint64m4_t): Ditto.
	(vint64m8_t): Ditto.
	(vuint8mf8_t): Ditto.
	(vuint16mf4_t): Ditto.
	(vuint32mf2_t): Ditto.
	(vuint64m1_t): Ditto.
	(vuint64m2_t): Ditto.
	(vuint64m4_t): Ditto.
	(vuint64m8_t): Ditto.
	(vfloat32mf2_t): Ditto.
	(vbool64_t): Ditto.
	* config/riscv/riscv-vector-builtins.cc (register_builtin_type): Add comments.
	(register_vector_type): Ditto.
	(check_required_extensions): Fix condition.
	* config/riscv/riscv-vector-builtins.h (RVV_REQUIRE_ZVE64): Remove it.
	(RVV_REQUIRE_ELEN_64): New define.
	(RVV_REQUIRE_MIN_VLEN_64): Ditto.
	* config/riscv/riscv-vector-switch.def (TARGET_VECTOR_FP32): Remove it.
	(TARGET_VECTOR_FP64): Ditto.
	(ENTRY): Fix predicate.
	* config/riscv/vector-iterators.md: Fix predicate.

2023-04-12  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/109410
	* tree-ssa-reassoc.cc (build_and_add_sum): Split edge from entry
	block if first statement of the function is a call to returns_twice
	function.

2023-04-12  Jakub Jelinek  <jakub@redhat.com>

	PR target/109458
	* config/i386/i386.cc: Include rtl-error.h.
	(ix86_print_operand): For z modifier warning, use warning_for_asm
	if this_is_asm_operands.  For Z modifier errors, use %c and code
	instead of hardcoded Z.

2023-04-12  Costas Argyris  <costas.argyris@gmail.com>

	* config/i386/x-mingw32-utf8: Remove extrataneous $@

2023-04-12  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/109462
	* gimple-range-cache.cc (ranger_cache::fill_block_cache): Don't
	check for equivalences if NAME is a phi node.

2023-04-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/109473
	* tree-vect-loop.cc (vect_create_epilog_for_reduction):
	Convert scalar result to the computation type before performing
	the reduction adjustment.

2023-04-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/109469
	* tree-vect-slp.cc (vect_slp_function): Skip region starts with
	a returns-twice call.

2023-04-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/109434
	* tree-ssa-dse.cc (initialize_ao_ref_for_dse): Properly
	handle possibly throwing calls when processing the LHS
	and may-defs are not OK.

2023-04-11  Lin Sinan  <mynameisxiaou@gmail.com>

	* config/riscv/predicates.md (uimm_extra_bit_or_twobits): Adjust
	predicate to avoid splitting arith constants.

2023-04-11  Yanzhang Wang  <yanzhang.wang@intel.com>
	    Pan Li  <pan2.li@intel.com>
	    Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>
	    Kito Cheng  <kito.cheng@sifive.com>

	PR target/109104
	* config/riscv/riscv-protos.h (emit_hard_vlmax_vsetvl): New.
	* config/riscv/riscv-v.cc (emit_hard_vlmax_vsetvl): New.
	(emit_vlmax_vsetvl): Use emit_hard_vlmax_vsetvl.
	* config/riscv/riscv.cc (vector_zero_call_used_regs): New.
	(riscv_zero_call_used_regs): New.
	(TARGET_ZERO_CALL_USED_REGS): New.

2023-04-11  Martin Liska  <mliska@suse.cz>

	PR driver/108241
	* opts.cc (finish_options): Drop also
	x_flag_var_tracking_assignments.

2023-04-11  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	PR tree-optimization/108888
	* tree-if-conv.cc (predicate_statements): Fix gimple call check.

2023-04-11  Haochen Gui  <guihaoc@gcc.gnu.org>

	PR target/108812
	* config/rs6000/vsx.md (vsx_sign_extend_qi_<mode>): Rename to...
	(vsx_sign_extend_v16qi_<mode>): ... this.
	(vsx_sign_extend_hi_<mode>): Rename to...
	(vsx_sign_extend_v8hi_<mode>): ... this.
	(vsx_sign_extend_si_v2di): Rename to...
	(vsx_sign_extend_v4si_v2di): ... this.
	(vsignextend_qi_<mode>): Remove.
	(vsignextend_hi_<mode>): Remove.
	(vsignextend_si_v2di): Remove.
	(vsignextend_v2di_v1ti): Remove.
	(*xxspltib_<mode>_split): Replace gen_vsx_sign_extend_qi_v2di with
	gen_vsx_sign_extend_v16qi_v2di and gen_vsx_sign_extend_qi_v4si
	with gen_vsx_sign_extend_v16qi_v4si.
	* config/rs6000/rs6000.md (split for DI constant generation):
	Replace gen_vsx_sign_extend_qi_si with gen_vsx_sign_extend_v16qi_si.
	(split for HSDI constant generation): Replace gen_vsx_sign_extend_qi_di
	with gen_vsx_sign_extend_v16qi_di and gen_vsx_sign_extend_qi_si
	with gen_vsx_sign_extend_v16qi_si.
	* config/rs6000/rs6000-builtins.def (__builtin_altivec_vsignextsb2d):
	Set bif-pattern to vsx_sign_extend_v16qi_v2di.
	(__builtin_altivec_vsignextsb2w): Set bif-pattern to
	vsx_sign_extend_v16qi_v4si.
	(__builtin_altivec_visgnextsh2d): Set bif-pattern to
	vsx_sign_extend_v8hi_v2di.
	(__builtin_altivec_vsignextsh2w): Set bif-pattern to
	vsx_sign_extend_v8hi_v4si.
	(__builtin_altivec_vsignextsw2d): Set bif-pattern to
	vsx_sign_extend_si_v2di.
	(__builtin_altivec_vsignext): Set bif-pattern to
	vsx_sign_extend_v2di_v1ti.
	* config/rs6000/rs6000-builtin.cc (lxvrse_expand_builtin): Replace
	gen_vsx_sign_extend_qi_v2di with gen_vsx_sign_extend_v16qi_v2di,
	gen_vsx_sign_extend_hi_v2di with gen_vsx_sign_extend_v8hi_v2di and
	gen_vsx_sign_extend_si_v2di with gen_vsx_sign_extend_v4si_v2di.

2023-04-10   Michael Meissner  <meissner@linux.ibm.com>

	PR target/70243
	* config/rs6000/vsx.md (vsx_fmav4sf4): Do not generate vmaddfp.
	(vsx_nfmsv4sf4): Do not generate vnmsubfp.

2023-04-10  Haochen Jiang  <haochen.jiang@intel.com>

	* config/i386/i386.h (PTA_GRANITERAPIDS): Add PTA_AMX_COMPLEX.

2023-04-10  Haochen Jiang  <haochen.jiang@intel.com>

	* common/config/i386/cpuinfo.h (get_available_features):
	Detect AMX-COMPLEX.
	* common/config/i386/i386-common.cc
	(OPTION_MASK_ISA2_AMX_COMPLEX_SET,
	OPTION_MASK_ISA2_AMX_COMPLEX_UNSET): New.
	(ix86_handle_option): Handle -mamx-complex.
	* common/config/i386/i386-cpuinfo.h (enum processor_features):
	Add FEATURE_AMX_COMPLEX.
	* common/config/i386/i386-isas.h: Add ISA_NAME_TABLE_ENTRY for
	amx-complex.
	* config.gcc: Add amxcomplexintrin.h.
	* config/i386/cpuid.h (bit_AMX_COMPLEX): New.
	* config/i386/i386-c.cc (ix86_target_macros_internal): Define
	__AMX_COMPLEX__.
	* config/i386/i386-isa.def (AMX_COMPLEX): Add DEF_PTA(AMX_COMPLEX).
	* config/i386/i386-options.cc (ix86_valid_target_attribute_inner_p):
	Handle amx-complex.
	* config/i386/i386.opt: Add option -mamx-complex.
	* config/i386/immintrin.h: Include amxcomplexintrin.h.
	* doc/extend.texi: Document amx-complex.
	* doc/invoke.texi: Document -mamx-complex.
	* doc/sourcebuild.texi: Document target amx-complex.
	* config/i386/amxcomplexintrin.h: New file.

2023-04-08  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/109392
	* tree-vect-generic.cc (tree_vec_extract): Handle failure
	of maybe_push_res_to_seq better.

2023-04-08  Jakub Jelinek  <jakub@redhat.com>

	* Makefile.in (CORETYPES_H): Depend on align.h, poly-int.h and
	poly-int-types.h.
	(SYSTEM_H): Depend on $(HASHTAB_H).
	* config/riscv/t-riscv (build/genrvv-type-indexer.o): Remove unused
	dependency on $(RTL_BASE_H), remove redundant dependency on
	insn-modes.h.

2023-04-06  Richard Earnshaw  <rearnsha@arm.com>

	PR target/107674
	* config/arm/arm.cc (arm_effective_regno): New function.
	(mve_vector_mem_operand): Use it.

2023-04-06  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/109417
	* gimple-range-gori.cc (gori_compute::may_recompute_p): Check if
	dependency is in SSA_NAME_FREE_LIST.

2023-04-06  Andrew Pinski  <apinski@marvell.com>

	PR tree-optimization/109427
	* params.opt (-param=vect-induction-float=):
	Fix option attribute typo for IntegerRange.

2023-04-05  Jeff Law  <jlaw@ventanamicro>

	PR target/108892
	* combine.cc (combine_instructions): Force re-recognition when
	after restoring the body of an insn to its original form.

2023-04-05  Martin Jambor  <mjambor@suse.cz>

	PR ipa/108959
	* ipa-sra.cc (zap_useless_ipcp_results): New function.
	(process_isra_node_results): Call it.

2023-04-05  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/vector.md: Fix incorrect operand order.

2023-04-05  Juzhe-Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vsetvl.cc
	(pass_vsetvl::compute_local_backward_infos): Update user vsetvl in local
	demand fusion.

2023-04-05  Li Xu  <xuli1@eswincomputing.com>

	* config/riscv/riscv-vector-builtins.def: Fix typo.
	* config/riscv/riscv.cc (riscv_dwarf_poly_indeterminate_value): Ditto.
	* config/riscv/vector-iterators.md: Ditto.

2023-04-04  Hans-Peter Nilsson  <hp@axis.com>

	* doc/md.texi (Including Patterns): Fix page break.

2023-04-04  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/109386
	* range-op-float.cc (foperator_lt::op1_range, foperator_lt::op2_range,
	foperator_le::op1_range, foperator_le::op2_range,
	foperator_gt::op1_range, foperator_gt::op2_range,
	foperator_ge::op1_range, foperator_ge::op2_range): Make r varying for
	BRS_FALSE case even if the other op is maybe_isnan, not just
	known_isnan.
	(foperator_unordered_lt::op1_range, foperator_unordered_lt::op2_range,
	foperator_unordered_le::op1_range, foperator_unordered_le::op2_range,
	foperator_unordered_gt::op1_range, foperator_unordered_gt::op2_range,
	foperator_unordered_ge::op1_range, foperator_unordered_ge::op2_range):
	Make r varying for BRS_TRUE case even if the other op is maybe_isnan,
	not just known_isnan.

2023-04-04  Marek Polacek  <polacek@redhat.com>

	PR sanitizer/109107
	* fold-const.cc (fold_binary_loc): Use TYPE_OVERFLOW_SANITIZED
	when associating.
	* match.pd: Use TYPE_OVERFLOW_SANITIZED.

2023-04-04  Stam Markianos-Wright  <stam.markianos-wright@arm.com>

	* config/arm/mve.md (mve_vcvtq_n_to_f_<supf><mode>): Swap operands.
	(mve_vcreateq_f<mode>): Swap operands.

2023-04-04  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (one_cmpl<mode>2<exec>): New.

2023-04-04  Jakub Jelinek  <jakub@redhat.com>

	PR target/109384
	* common/config/riscv/riscv-common.cc (riscv_subset_list::parse):
	Reword diagnostics about zfinx conflict with f, formatting fixes.

2023-04-04  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* config/sol2.h (LIB_SPEC): Don't link with -lpthread.

2023-04-04  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/109304
	* tree-profile.cc (tree_profiling): Use symtab node
	availability to decide whether to skip adjusting calls.
	Do not adjust calls to internal functions.

2023-04-04  Kewen Lin  <linkw@linux.ibm.com>

	PR target/108807
	* config/rs6000/rs6000.cc (rs6000_expand_vector_set_var_p9): Fix gen
	function for permutation control vector by considering big endianness.

2023-04-04  Kewen Lin  <linkw@linux.ibm.com>

	PR target/108699
	* config/rs6000/altivec.md (*p9v_parity<mode>2): Rename to ...
	(rs6000_vprtyb<mode>2): ... this.
	* config/rs6000/rs6000-builtins.def (VPRTYBD): Replace parityv2di2 with
	rs6000_vprtybv2di2.
	(VPRTYBW): Replace parityv4si2 with rs6000_vprtybv4si2.
	(VPRTYBQ): Replace parityv1ti2 with rs6000_vprtybv1ti2.
	* config/rs6000/vector.md (parity<mode>2 with VEC_IP): Expand with
	popcountv16qi2 and the corresponding rs6000_vprtyb<mode>2.

2023-04-04  Hans-Peter Nilsson  <hp@axis.com>
	    Sandra Loosemore  <sandra@codesourcery.com>

	* doc/md.texi (Insn Splitting): Tweak wording for readability.

2023-04-03  Martin Jambor  <mjambor@suse.cz>

	PR ipa/109303
	* ipa-prop.cc (determine_known_aggregate_parts): Check that the
	offset + size will be representable in unsigned int.

2023-04-03  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* configure.ac (ZSTD_LIB): Move before zstd.h check.
	Unset gcc_cv_header_zstd_h without libzstd.
	* configure: Regenerate.

2023-04-03  Martin Liska  <mliska@suse.cz>

	* doc/invoke.texi: Document new param.

2023-04-03  Cupertino Miranda  <cupertino.miranda@oracle.com>

	* doc/sourcebuild.texi (const_volatile_readonly_section): Document
	new check_effective_target function.

2023-04-03  Li Xu  <xuli1@eswincomputing.com>

	* config/riscv/riscv-vector-builtins.def (vuint32m8_t): Fix typo.
	(vfloat32m8_t): Likewise

2023-04-03  liuhongt  <hongtao.liu@intel.com>

	* doc/md.texi: Document signbitm2.

2023-04-02  Juzhe-Zhong  <juzhe.zhong@rivai.ai>
	    kito-cheng  <kito.cheng@sifive.com>

	* config/riscv/vector.md: Fix RA constraint.

2023-04-02  Juzhe-Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-protos.h (gen_avl_for_scalar_move): New function.
	* config/riscv/riscv-v.cc (gen_avl_for_scalar_move): New function.
	* config/riscv/vector.md: Fix scalar move bug.

2023-04-01  Jakub Jelinek  <jakub@redhat.com>

	* range-op-float.cc (foperator_equal::fold_range): If at least
	one of the op ranges is not singleton and neither is NaN and all
	4 bounds are zero, return [1, 1].
	(foperator_not_equal::fold_range): In the same case return [0, 0].

2023-04-01  Jakub Jelinek  <jakub@redhat.com>

	* range-op-float.cc (foperator_equal::fold_range): Perform the
	non-singleton handling regardless of maybe_isnan (op1, op2).
	(foperator_not_equal::fold_range): Likewise.
	(foperator_lt::fold_range, foperator_le::fold_range,
	foperator_gt::fold_range, foperator_ge::fold_range): Perform the
	real_* comparison check which results in range_false (type)
	even if maybe_isnan (op1, op2).  Simplify.
	(foperator_ltgt): New class.
	(fop_ltgt): New variable.
	(floating_op_table::floating_op_table): Handle LTGT_EXPR using
	fop_ltgt.

2023-04-01  Jakub Jelinek  <jakub@redhat.com>

	PR target/109254
	* builtins.cc (apply_args_size): If targetm.calls.get_raw_arg_mode
	returns VOIDmode, handle it like if the register isn't used for
	passing arguments at all.
	(apply_result_size): If targetm.calls.get_raw_result_mode returns
	VOIDmode, handle it like if the register isn't used for returning
	results at all.
	* target.def (get_raw_result_mode, get_raw_arg_mode): Document what it
	means to return VOIDmode.
	* doc/tm.texi: Regenerated.
	* config/aarch64/aarch64.cc (aarch64_function_value_regno_p): Return
	TARGET_SVE for P0_REGNUM.
	(aarch64_function_arg_regno_p): Also return true for p0-p3.
	(aarch64_get_reg_raw_mode): Return VOIDmode for PR_REGNUM_P regs.

2023-03-31  Vladimir N. Makarov  <vmakarov@redhat.com>

	* lra-constraints.cc: (combine_reload_insn): New function.

2023-03-31  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/91645
	* range-op-float.cc (foperator_unordered_lt::fold_range,
	foperator_unordered_le::fold_range,
	foperator_unordered_gt::fold_range,
	foperator_unordered_ge::fold_range,
	foperator_unordered_equal::fold_range): Call the ordered
	fold_range on ranges with cleared NaNs.
	* value-query.cc (range_query::get_tree_range): Handle also
	COMPARISON_CLASS_P trees.

2023-03-31  Kito Cheng  <kito.cheng@sifive.com>
	    Andrew Pinski  <pinskia@gmail.com>

	PR target/109328
	* config/riscv/t-riscv: Add missing dependencies.

2023-03-31  liuhongt  <hongtao.liu@intel.com>

	* config/i386/i386.cc (inline_memory_move_cost): Return 100
	for MASK_REGS when MODE_SIZE > 8.

2023-03-31  liuhongt  <hongtao.liu@intel.com>

	PR target/85048
	* config/i386/i386-builtin.def (BDESC): Adjust icode name from
	ufloat/ufix to floatuns/fixuns.
	* config/i386/i386-expand.cc
	(ix86_expand_vector_convert_uns_vsivsf): Adjust comments.
	* config/i386/sse.md
	(ufloat<sseintvecmodelower><mode>2<mask_name><round_name>):
	Renamed	to ..
	(<mask_codefor>floatuns<sseintvecmodelower><mode>2<mask_name><round_name>):.. this.
	(<mask_codefor><avx512>_ufix_notrunc<sf2simodelower><mode><mask_name><round_name>):
	Renamed to ..
	(<mask_codefor><avx512>_fixuns_notrunc<sf2simodelower><mode><mask_name><round_name>):
	.. this.
	(<fixsuffix>fix_truncv16sfv16si2<mask_name><round_saeonly_name>):
	Renamed to ..
	(fix<fixunssuffix>_truncv16sfv16si2<mask_name><round_saeonly_name>):.. this.
	(ufloat<si2dfmodelower><mode>2<mask_name>): Renamed to ..
	(floatuns<si2dfmodelower><mode>2<mask_name>): .. this.
	(ufloatv2siv2df2<mask_name>): Renamed to ..
	(<mask_codefor>floatunsv2siv2df2<mask_name>): .. this.
	(ufix_notrunc<mode><si2dfmodelower>2<mask_name><round_name>):
	Renamed to ..
	(fixuns_notrunc<mode><si2dfmodelower>2<mask_name><round_name>):
	.. this.
	(ufix_notruncv2dfv2si2): Renamed to ..
	(fixuns_notruncv2dfv2si2):.. this.
	(ufix_notruncv2dfv2si2_mask): Renamed to ..
	(fixuns_notruncv2dfv2si2_mask): .. this.
	(*ufix_notruncv2dfv2si2_mask_1): Renamed to ..
	(*fixuns_notruncv2dfv2si2_mask_1): .. this.
	(ufix_truncv2dfv2si2): Renamed to ..
	(*fixuns_truncv2dfv2si2): .. this.
	(ufix_truncv2dfv2si2_mask): Renamed to ..
	(fixuns_truncv2dfv2si2_mask): .. this.
	(*ufix_truncv2dfv2si2_mask_1): Renamed to ..
	(*fixuns_truncv2dfv2si2_mask_1): .. this.
	(ufix_truncv4dfv4si2<mask_name>): Renamed to ..
	(fixuns_truncv4dfv4si2<mask_name>): .. this.
	(ufix_notrunc<mode><sseintvecmodelower>2<mask_name><round_name>):
	Renamed to ..
	(fixuns_notrunc<mode><sseintvecmodelower>2<mask_name><round_name>):
	.. this.
	(ufix_trunc<mode><sseintvecmodelower>2<mask_name>): Renamed to ..
	(<mask_codefor>fixuns_trunc<mode><sseintvecmodelower>2<mask_name>):
	.. this.

2023-03-30  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/109154
	* gimple-range-gori.cc (gori_compute::may_recompute_p): Add depth limit.
	* gimple-range-gori.h (may_recompute_p): Add depth param.
	* params.opt (ranger-recompute-depth): New param.

2023-03-30  Jason Merrill  <jason@redhat.com>

	PR c++/107897
	PR c++/108887
	* cgraph.h: Move reset() from cgraph_node to symtab_node.
	* cgraphunit.cc (symtab_node::reset): Adjust.  Also call
	remove_from_same_comdat_group.

2023-03-30  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/107561
	* gimple-ssa-warn-access.cc (get_size_range): Add flags
	argument and pass it on.
	(check_access): When querying for the size range pass
	SR_ALLOW_ZERO when the known destination size is zero.

2023-03-30  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/109342
	* tree-ssa-sccvn.cc (vn_nary_op_get_predicated_value): New
	overload for edge.  When that edge is a backedge use
	dominated_by_p directly.

2023-03-30  liuhongt  <hongtao.liu@intel.com>

	* config/i386/i386-expand.cc (expand_vec_perm_blend): Generate
	vpblendd instead of vpblendw for V4SI under avx2.

2023-03-29  Hans-Peter Nilsson  <hp@axis.com>

	* config/cris/cris.cc (cris_rtx_costs) [CONST_INT]: Return 0
	for many quick operands, for register-sized modes.

2023-03-29  Jiawei  <jiawei@iscas.ac.cn>

	* common/config/riscv/riscv-common.cc (riscv_subset_list::parse):
	New check.

2023-03-29  Martin Liska  <mliska@suse.cz>

	PR bootstrap/109310
	* configure.ac: Emit a warning for deprecated option
	--enable-link-mutex.
	* configure: Regenerate.

2023-03-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/109331
	* tree-ssa-forwprop.cc (pass_forwprop::execute): When we
	discover a taken edge make sure to cleanup the CFG.

2023-03-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/109327
	* tree-ssa-forwprop.cc (pass_forwprop::execute): Deal with
	already removed stmts when draining to_remove.

2023-03-29  Richard Biener  <rguenther@suse.de>

	PR ipa/106124
	* dwarf2out.cc (lookup_type_die): Reset TREE_ASM_WRITTEN
	so we can re-create the DIE for the type if required.

2023-03-29  Jakub Jelinek  <jakub@redhat.com>
	    Richard Biener  <rguenther@suse.de>

	PR tree-optimization/109301
	* tree-ssa-math-opts.cc (pass_data_cse_sincos): Change
	properties_provided from PROP_gimple_opt_math to 0.
	(pass_data_expand_powcabs): Change properties_provided from 0 to
	PROP_gimple_opt_math.

2023-03-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/109154
	* tree-if-conv.cc (gen_phi_arg_condition): Handle single
	inverted condition specially by inverting at the caller.
	(gen_phi_arg_condition): Swap COND_EXPR arms if requested.

2023-03-28  David Malcolm  <dmalcolm@redhat.com>

	PR c/107002
	* diagnostic-show-locus.cc (column_range::column_range): Factor
	out assertion conditional into...
	(column_range::valid_p): ...this new function.
	(line_corrections::add_hint): Don't attempt to consolidate hints
	if it would lead to invalid column_range instances.

2023-03-28  Kito Cheng  <kito.cheng@sifive.com>

	PR target/109312
	* config/riscv/riscv-c.cc (riscv_ext_version_value): New.
	(riscv_cpu_cpp_builtins): Define __riscv_v_intrinsic and
	minor refactor.

2023-03-28  Alexander Monakov  <amonakov@ispras.ru>

	PR rtl-optimization/109187
	* haifa-sched.cc (autopref_rank_for_schedule): Avoid use of overflowing
	subtraction in three-way comparison.

2023-03-28  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/109265
	PR tree-optimization/109274
	* gimple-range-gori.cc (gori_compute::compute_operand_range): Do
	not create a relation record is op1 and op2 are the same symbol.
	(gori_compute::compute_operand1_range): Pass op1 == op2 to the
	handler for this stmt, but create a new record only if this statement
	generates a relation based on the ranges.
	(gori_compute::compute_operand2_range): Ditto.
	* value-relation.h (value_relation::set_relation): Always create the
	record that is requested.

2023-03-28  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/107087
	* tree-ssa-forwprop.cc (pass_forwprop::execute): Track
	executable regions to avoid useless work and to better
	propagate degenerate PHIs.

2023-03-28  Costas Argyris  <costas.argyris@gmail.com>

	* config/i386/x-mingw32-utf8: update comments.

2023-03-28  Richard Sandiford  <richard.sandiford@arm.com>

	PR target/109072
	* config/aarch64/aarch64-protos.h (aarch64_vector_load_decl): Declare.
	* config/aarch64/aarch64.h (machine_function::vector_load_decls): New
	variable.
	* config/aarch64/aarch64-builtins.cc (aarch64_record_vector_load_arg):
	New function.
	(aarch64_general_gimple_fold_builtin): Delay folding of vld1 until
	after inlining.  Record which decls are loaded from.  Fix handling
	of vops for loads and stores.
	* config/aarch64/aarch64.cc (aarch64_vector_load_decl): New function.
	(aarch64_accesses_vector_load_decl_p): Likewise.
	(aarch64_vector_costs::m_stores_to_vector_load_decl): New member
	variable.
	(aarch64_vector_costs::add_stmt_cost): If the function has a vld1
	that loads from a decl, treat vector stores to those decls as
	zero cost.
	(aarch64_vector_costs::finish_cost): ...and in that case,
	if the vector code does nothing more than a store, give the
	prologue a zero cost as well.

2023-03-28  Richard Biener  <rguenther@suse.de>

	PR bootstrap/84402
	PR tree-optimization/108129
	* genmatch.cc (lower_for): For (match ...) delay
	substituting into the match operator if possible.
	(dt_operand::gen_gimple_expr): For user_id look at the
	first substitute for determining how to access operands.
	(dt_operand::gen_generic_expr): Likewise.
	(dt_node::gen_kids): Properly sort user_ids according
	to their substitutes.
	(dt_node::gen_kids_1): Code-generate user_id matching.

2023-03-28  Jakub Jelinek  <jakub@redhat.com>
	    Jonathan Wakely  <jwakely@redhat.com>

	* gcov-tool.cc (do_merge, do_merge_stream, do_rewrite, do_overlap):
	Use subcommand rather than sub-command in function comments.

2023-03-28  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/109154
	* value-range.h (frange::flush_denormals_to_zero): Make it public
	rather than private.
	* value-range.cc (frange::set): Don't call flush_denormals_to_zero
	here.
	* range-op-float.cc (range_operator_float::fold_range): Call
	flush_denormals_to_zero.

2023-03-28  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/106190
	* sanopt.cc (pass_sanopt::execute): Return TODO_cleanup_cfg if any
	of the IFN_{UB,HWA,A}SAN_* internal fns are lowered.

2023-03-28  Jakub Jelinek  <jakub@redhat.com>

	* range-op-float.cc (float_widen_lhs_range): Use pass get_nan_state
	as 4th argument to set to avoid clear_nan and union_ calls.

2023-03-28  Jakub Jelinek  <jakub@redhat.com>

	PR target/109276
	* config/i386/i386.cc (assign_386_stack_local): For DImode
	with SLOT_FLOATxFDI_387 and -m32 -mpreferred-stack-boundary=2 pass
	align 32 rather than 0 to assign_stack_local.

2023-03-28  Eric Botcazou  <ebotcazou@adacore.com>

	PR target/109140
	* config/sparc/sparc.cc (sparc_expand_vcond): Call signed_condition
	on operand #3 to get the final condition code.  Use std::swap.
	* config/sparc/sparc.md (vcondv8qiv8qi): New VIS 4 expander.
	(fucmp<gcond:code>8<P:mode>_vis): Move around.
	(fpcmpu<gcond:code><GCM:gcm_name><P:mode>_vis): Likewise.
	(vcondu<GCM:mode><GCM:mode>): New VIS 4 expander.

2023-03-28  Eric Botcazou  <ebotcazou@adacore.com>

	* doc/gm2.texi: Add missing Next, Previous and Top fields to most
	top-level sections.

2023-03-28  Costas Argyris  <costas.argyris@gmail.com>

	* config.host: Pull in i386/x-mingw32-utf8 Makefile
	fragment and reference utf8rc-mingw32.o explicitly
	for mingw hosts.
	* config/i386/sym-mingw32.cc: prevent name mangling of
	stub symbol.
	* config/i386/x-mingw32-utf8: Make utf8rc-mingw32.o
	depend on manifest file explicitly.

2023-03-28  Richard Biener  <rguenther@suse.de>

	Revert:
	2023-03-27  Richard Biener  <rguenther@suse.de>

	PR rtl-optimization/109237
	* cfgcleanup.cc (bb_is_just_return): Walk insns backwards.

2023-03-28  Richard Biener  <rguenther@suse.de>

	* common.opt (gdwarf): Remove Negative(gdwarf-).

2023-03-28  Richard Biener  <rguenther@suse.de>

	* common.opt (gdwarf): Add RejectNegative.
	(gdwarf-): Likewise.
	(ggdb): Likewise.
	(gvms): Likewise.

2023-03-28  Hans-Peter Nilsson  <hp@axis.com>

	* config/cris/constraints.md ("T"): Correct to
	define_memory_constraint.

2023-03-28  Hans-Peter Nilsson  <hp@axis.com>

	* config/cris/cris.md (BW2): New mode-iterator.
	(lra_szext_decomposed, lra_szext_decomposed_indirect_with_offset): New
	peephole2s.

2023-03-28  Hans-Peter Nilsson  <hp@axis.com>

	* config/cris/cris.md ("*add<mode>3_addi"): Improve to bail only
	for possible eliminable compares.

2023-03-28  Hans-Peter Nilsson  <hp@axis.com>

	* config/cris/constraints.md ("R"): Remove unused constraint.

2023-03-27  Jonathan Wakely  <jwakely@redhat.com>

	PR gcov-profile/109297
	* gcov-tool.cc (merge_usage): Fix "subcomand" typo.
	(merge_stream_usage): Likewise.
	(overlap_usage): Likewise.

2023-03-27  Christoph Müllner  <christoph.muellner@vrull.eu>

	PR target/109296
	* config/riscv/thead.md: Add missing mode specifiers.

2023-03-27  Philipp Tomsich  <philipp.tomsich@vrull.eu>
	    Jiangning Liu  <jiangning.liu@amperecomputing.com>
	    Manolis Tsamis  <manolis.tsamis@vrull.eu>

	* config/aarch64/aarch64.cc: Update vector costs for ampere1.

2023-03-27  Richard Biener  <rguenther@suse.de>

	PR rtl-optimization/109237
	* cfgcleanup.cc (bb_is_just_return): Walk insns backwards.

2023-03-27  Richard Biener  <rguenther@suse.de>

	PR lto/109263
	* lto-wrapper.cc (run_gcc): Parse alternate debug options
	as well, they always enable debug.

2023-03-27  Kewen Lin  <linkw@linux.ibm.com>

	PR target/109167
	* config/rs6000/emmintrin.h (_mm_bslli_si128): Move the implementation
	from ...
	(_mm_slli_si128): ... here.  Change to call _mm_bslli_si128 directly.

2023-03-27  Kewen Lin  <linkw@linux.ibm.com>

	PR target/109082
	* config/rs6000/emmintrin.h (_mm_bslli_si128): Check __N is not less
	than zero when calling vec_sld.
	(_mm_bsrli_si128): Return __A if __N is zero, check __N is bigger than
	zero when calling vec_sld.
	(_mm_slli_si128): Return __A if _imm5 is zero, check _imm5 is bigger
	than zero when calling vec_sld.

2023-03-27  Sandra Loosemore  <sandra@codesourcery.com>

	* doc/generic.texi (OpenMP): Document OMP_SIMD, OMP_DISTRIBUTE,
	OMP_TASKLOOP, and OMP_LOOP with OMP_FOR.  Document how collapsed
	loops are represented and which fields are vectors.  Add
	documentation for OMP_FOR_PRE_BODY field.  Document internal
	form of non-rectangular loops and OMP_FOR_NON_RECTANGULAR.
	* tree.def (OMP_FOR): Make documentation consistent with the
	Texinfo manual, to fill some gaps and correct errors.

2023-03-26  Andreas Schwab  <schwab@linux-m68k.org>

	PR target/106282
	* config/m68k/m68k.h (FINAL_PRESCAN_INSN): Define.
	* config/m68k/m68k.cc (m68k_final_prescan_insn): Define.
	(handle_move_double): Call it before handle_movsi.
	* config/m68k/m68k-protos.h: Declare it.

2023-03-26  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/109230
	* match.pd (fneg/fadd simplify): Verify also odd permutation indexes.

2023-03-26  Jakub Jelinek  <jakub@redhat.com>

	PR ipa/105685
	* predict.cc (compute_function_frequency): Don't call
	warn_function_cold if function already has cold attribute.

2023-03-26  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/install.texi: Remove anachronistic note
	related to languages built and separate source tarballs.

2023-03-25  David Malcolm  <dmalcolm@redhat.com>

	PR analyzer/109098
	* diagnostic-format-sarif.cc (read_until_eof): Delete.
	(maybe_read_file): Delete.
	(sarif_builder::maybe_make_artifact_content_object): Use
	get_source_file_content rather than maybe_read_file.
	Reject it if it's not valid UTF-8.
	* input.cc (file_cache_slot::get_full_file_content): New.
	(get_source_file_content): New.
	(selftest::check_cpp_valid_utf8_p): New.
	(selftest::test_cpp_valid_utf8_p): New.
	(selftest::input_cc_tests): Call selftest::test_cpp_valid_utf8_p.
	* input.h (get_source_file_content): New prototype.

2023-03-24  David Malcolm  <dmalcolm@redhat.com>

	* doc/analyzer.texi (Debugging the Analyzer): Add notes on useful
	debugging options.
	(Special Functions for Debugging the Analyzer): Convert to a
	table, and rewrite in places.
	(Other Debugging Techniques): Add notes on how to compare two
	different exploded graphs.

2023-03-24  David Malcolm  <dmalcolm@redhat.com>

	PR other/109163
	* json.cc: Update comments to indicate that we now preserve
	insertion order of keys within objects.
	(object::print): Traverse keys in insertion order.
	(object::set): Preserve insertion order of keys.
	(selftest::test_writing_objects): Add an additional key to verify
	that we preserve insertion order.
	* json.h (object::m_keys): New field.

2023-03-24  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/109238
	* gimple-range-cache.cc (ranger_cache::resolve_dom): Ignore
	predecessors which this block dominates.

2023-03-24  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/106912
	* tree-profile.cc (tree_profiling): Update stmts only when
	profiling or testing coverage.  Make sure to update calls
	fntype, stripping 'const' there.

2023-03-24  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/109258
	* builtins.cc (inline_expand_builtin_bytecmp): Return NULL_RTX early
	if target == const0_rtx.

2023-03-24  Alexandre Oliva  <oliva@adacore.com>

	* doc/sourcebuild.texi (weak_undefined, posix_memalign):
	Document options and effective targets.

2023-03-24  Costas Argyris  <costas.argyris@gmail.com>

	* config/i386/x-mingw32-utf8: Make HOST_EXTRA_OBJS_SYMBOL
	optional.

2023-03-23  Pat Haugen  <pthaugen@linux.ibm.com>

	* config/rs6000/rs6000.md (*mod<mode>3, umod<mode>3): Add
	non-earlyclobber alternative.

2023-03-23  Andrew Pinski  <apinski@marvell.com>

	PR c/84900
	* fold-const.cc (maybe_lvalue_p): Treat COMPOUND_LITERAL_EXPR
	as a lvalue.

2023-03-23  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/107569
	* tree-ssa-sccvn.cc (eliminate_dom_walker::eliminate_stmt):
	Do not push SSA names with zero uses as available leader.
	(process_bb): Likewise.

2023-03-23  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/109262
	* tree-ssa-forwprop.cc (pass_forwprop::execute): When
	combining a piecewise complex load avoid touching loads
	that throw internally.  Use fun, not cfun throughout.

2023-03-23  Jakub Jelinek  <jakub@redhat.com>

	* value-range.cc (irange::irange_union, irange::intersect): Fix
	comment spelling bugs.
	* gimple-range-trace.cc (range_tracer::do_header): Likewise.
	* gimple-range-trace.h: Likewise.
	* gimple-range-edge.cc: Likewise.
	(gimple_outgoing_range_stmt_p,
	gimple_outgoing_range::switch_edge_range,
	gimple_outgoing_range::edge_range_p): Likewise.
	* gimple-range.cc (gimple_ranger::prefill_stmt_dependencies,
	gimple_ranger::fold_stmt, gimple_ranger::register_transitive_infer,
	assume_query::assume_query, assume_query::calculate_phi): Likewise.
	* gimple-range-edge.h: Likewise.
	* value-range.h (Value_Range::set, Value_Range::lower_bound,
	Value_Range::upper_bound, frange::set_undefined): Likewise.
	* gimple-range-gori.h (range_def_chain::depend, gori_map::m_outgoing,
	gori_compute): Likewise.
	* gimple-range-fold.h (fold_using_range): Likewise.
	* gimple-range-path.cc (path_range_query::compute_ranges_in_phis):
	Likewise.
	* gimple-range-gori.cc (range_def_chain::in_chain_p,
	range_def_chain::dump, gori_map::calculate_gori,
	gori_compute::compute_operand_range_switch,
	gori_compute::logical_combine, gori_compute::refine_using_relation,
	gori_compute::compute_operand1_range, gori_compute::may_recompute_p):
	Likewise.
	* gimple-range.h: Likewise.
	(enable_ranger): Likewise.
	* range-op.h (empty_range_varying): Likewise.
	* value-query.h (value_query): Likewise.
	* gimple-range-cache.cc (block_range_cache::set_bb_range,
	block_range_cache::dump, ssa_global_cache::clear_global_range,
	temporal_cache::temporal_value, temporal_cache::current_p,
	ranger_cache::range_of_def, ranger_cache::propagate_updated_value,
	ranger_cache::range_from_dom, ranger_cache::register_inferred_value):
	Likewise.
	* gimple-range-fold.cc (fur_edge::get_phi_operand,
	fur_stmt::get_operand, gimple_range_adjustment,
	fold_using_range::range_of_phi,
	fold_using_range::relation_fold_and_or): Likewise.
	* value-range-storage.h (irange_storage_slot::MAX_INTS): Likewise.
	* value-query.cc (range_query::value_of_expr,
	range_query::value_on_edge, range_query::query_relation): Likewise.
	* tree-vrp.cc (remove_unreachable::remove_and_update_globals,
	intersect_range_with_nonzero_bits): Likewise.
	* gimple-range-infer.cc (gimple_infer_range::check_assume_func,
	exit_range): Likewise.
	* value-relation.h: Likewise.
	(equiv_oracle, relation_trio::relation_trio, value_relation,
	value_relation::value_relation, pe_min): Likewise.
	* range-op-float.cc (range_operator_float::rv_fold,
	frange_arithmetic, foperator_unordered_equal::op1_range,
	foperator_div::rv_fold): Likewise.
	* gimple-range-op.cc (cfn_clz::fold_range): Likewise.
	* value-relation.cc (equiv_oracle::query_relation,
	equiv_oracle::register_equiv, equiv_oracle::add_equiv_to_block,
	value_relation::apply_transitive, relation_chain_head::find_relation,
	dom_oracle::query_relation, dom_oracle::find_relation_block,
	dom_oracle::find_relation_dom, path_oracle::register_equiv): Likewise.
	* range-op.cc (range_operator::wi_fold_in_parts_equiv,
	create_possibly_reversed_range, adjust_op1_for_overflow,
	operator_mult::wi_fold, operator_exact_divide::op1_range,
	operator_cast::lhs_op1_relation, operator_cast::fold_pair,
	operator_cast::fold_range, operator_abs::wi_fold, range_op_cast_tests,
	range_op_lshift_tests): Likewise.

2023-03-23  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn.cc (gcn_class_max_nregs): Handle vectors in SGPRs.
	(move_callee_saved_registers): Detect the bug condition early.

2023-03-23  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-protos.h (gcn_stepped_zero_int_parallel_p): New.
	* config/gcn/gcn-valu.md (V_1REG_ALT): New.
	(V_2REG_ALT): New.
	(vec_extract<V_1REG:mode><V_1REG_ALT:mode>_nop): New.
	(vec_extract<V_2REG:mode><V_2REG_ALT:mode>_nop): New.
	(vec_extract<V_ALL:mode><V_ALL_ALT:mode>): Use new patterns.
	* config/gcn/gcn.cc (gcn_stepped_zero_int_parallel_p): New.
	* config/gcn/predicates.md (ascending_zero_int_parallel): New.

2023-03-23  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/109176
	* tree-vect-generic.cc (expand_vector_condition): If a has
	vector boolean type and is a comparison, also check if both
	the comparison and VEC_COND_EXPR could be successfully expanded
	individually.

2023-03-23  Pan Li  <pan2.li@intel.com>
	    Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	PR target/108654
	PR target/108185
	* config/riscv/riscv-modes.def (ADJUST_BYTESIZE): Adjust size
	for vector mask modes.
	* config/riscv/riscv.cc (riscv_v_adjust_bytesize): New.
	* config/riscv/riscv.h (riscv_v_adjust_bytesize): New.

2023-03-23  Songhe Zhu  <zhusonghe@eswincomputing.com>

	* config/riscv/multilib-generator: Adjusting the loop of 'alt' in 'alts'.

2023-03-23  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	PR target/109244
	* config/riscv/riscv-protos.h (emit_vlmax_vsetvl): Define as global.
	(emit_vlmax_op): Ditto.
	* config/riscv/riscv-v.cc (get_sew): New function.
	(emit_vlmax_vsetvl): Adapt function.
	(emit_pred_op): Ditto.
	(emit_vlmax_op): Ditto.
	(emit_nonvlmax_op): Ditto.
	(legitimize_move): Fix LRA ICE.
	(gen_no_side_effects_vsetvl_rtx): Adapt function.
	* config/riscv/vector.md (@mov<V_FRACT:mode><P:mode>_lra): New pattern.
	(@mov<VB:mode><P:mode>_lra): Ditto.
	(*mov<V_FRACT:mode><P:mode>_lra): Ditto.
	(*mov<VB:mode><P:mode>_lra): Ditto.

2023-03-23  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	PR target/109228
	* config/riscv/riscv-vector-builtins-bases.cc (class vlenb): Add
	__riscv_vlenb support.
	(BASE): Ditto.
	* config/riscv/riscv-vector-builtins-bases.h: Ditto.
	* config/riscv/riscv-vector-builtins-functions.def (vlenb): Ditto.
	* config/riscv/riscv-vector-builtins-shapes.cc (struct vlenb_def): Ditto.
	(SHAPE): Ditto.
	* config/riscv/riscv-vector-builtins-shapes.h: Ditto.
	* config/riscv/riscv-vector-builtins.cc: Ditto.

2023-03-23  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>
	    kito-cheng  <kito.cheng@sifive.com>

	* config/riscv/riscv-vsetvl.cc (reg_available_p): Fix bugs.
	(pass_vsetvl::compute_local_backward_infos): Fix bugs.
	(pass_vsetvl::need_vsetvl): Fix bugs.
	(pass_vsetvl::backward_demand_fusion): Fix bugs.
	(pass_vsetvl::demand_fusion): Fix bugs.
	(eliminate_insn): Fix bugs.
	(insert_vsetvl): Ditto.
	(pass_vsetvl::emit_local_forward_vsetvls): Ditto.
	* config/riscv/riscv-vsetvl.h (enum vsetvl_type): Ditto.
	* config/riscv/vector.md: Ditto.

2023-03-23  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>
	    kito-cheng  <kito.cheng@sifive.com>

	* config/riscv/riscv-vector-builtins-bases.cc: Fix ternary bug.
	* config/riscv/vector-iterators.md (nmsac): Ditto.
	(nmsub): Ditto.
	(msac): Ditto.
	(msub): Ditto.
	(nmadd): Ditto.
	(nmacc): Ditto.
	* config/riscv/vector.md (@pred_mul_<optab><mode>): Ditto.
	(@pred_mul_plus<mode>): Ditto.
	(*pred_madd<mode>): Ditto.
	(*pred_macc<mode>): Ditto.
	(*pred_mul_plus<mode>): Ditto.
	(@pred_mul_plus<mode>_scalar): Ditto.
	(*pred_madd<mode>_scalar): Ditto.
	(*pred_macc<mode>_scalar): Ditto.
	(*pred_mul_plus<mode>_scalar): Ditto.
	(*pred_madd<mode>_extended_scalar): Ditto.
	(*pred_macc<mode>_extended_scalar): Ditto.
	(*pred_mul_plus<mode>_extended_scalar): Ditto.
	(@pred_minus_mul<mode>): Ditto.
	(*pred_<madd_nmsub><mode>): Ditto.
	(*pred_nmsub<mode>): Ditto.
	(*pred_<macc_nmsac><mode>): Ditto.
	(*pred_nmsac<mode>): Ditto.
	(*pred_mul_<optab><mode>): Ditto.
	(*pred_minus_mul<mode>): Ditto.
	(@pred_mul_<optab><mode>_scalar): Ditto.
	(@pred_minus_mul<mode>_scalar): Ditto.
	(*pred_<madd_nmsub><mode>_scalar): Ditto.
	(*pred_nmsub<mode>_scalar): Ditto.
	(*pred_<macc_nmsac><mode>_scalar): Ditto.
	(*pred_nmsac<mode>_scalar): Ditto.
	(*pred_mul_<optab><mode>_scalar): Ditto.
	(*pred_minus_mul<mode>_scalar): Ditto.
	(*pred_<madd_nmsub><mode>_extended_scalar): Ditto.
	(*pred_nmsub<mode>_extended_scalar): Ditto.
	(*pred_<macc_nmsac><mode>_extended_scalar): Ditto.
	(*pred_nmsac<mode>_extended_scalar): Ditto.
	(*pred_mul_<optab><mode>_extended_scalar): Ditto.
	(*pred_minus_mul<mode>_extended_scalar): Ditto.
	(*pred_<madd_msub><mode>): Ditto.
	(*pred_<macc_msac><mode>): Ditto.
	(*pred_<madd_msub><mode>_scalar): Ditto.
	(*pred_<macc_msac><mode>_scalar): Ditto.
	(@pred_neg_mul_<optab><mode>): Ditto.
	(@pred_mul_neg_<optab><mode>): Ditto.
	(*pred_<nmadd_msub><mode>): Ditto.
	(*pred_<nmsub_nmadd><mode>): Ditto.
	(*pred_<nmacc_msac><mode>): Ditto.
	(*pred_<nmsac_nmacc><mode>): Ditto.
	(*pred_neg_mul_<optab><mode>): Ditto.
	(*pred_mul_neg_<optab><mode>): Ditto.
	(@pred_neg_mul_<optab><mode>_scalar): Ditto.
	(@pred_mul_neg_<optab><mode>_scalar): Ditto.
	(*pred_<nmadd_msub><mode>_scalar): Ditto.
	(*pred_<nmsub_nmadd><mode>_scalar): Ditto.
	(*pred_<nmacc_msac><mode>_scalar): Ditto.
	(*pred_<nmsac_nmacc><mode>_scalar): Ditto.
	(*pred_neg_mul_<optab><mode>_scalar): Ditto.
	(*pred_mul_neg_<optab><mode>_scalar): Ditto.
	(@pred_widen_neg_mul_<optab><mode>): Ditto.
	(@pred_widen_mul_neg_<optab><mode>): Ditto.
	(@pred_widen_neg_mul_<optab><mode>_scalar): Ditto.
	(@pred_widen_mul_neg_<optab><mode>_scalar): Ditto.

2023-03-23  liuhongt  <hongtao.liu@intel.com>

	* builtins.cc (builtin_memset_read_str): Replace
	targetm.gen_memset_scratch_rtx with gen_reg_rtx.
	(builtin_memset_gen_str): Ditto.
	* config/i386/i386-expand.cc
	(ix86_convert_const_wide_int_to_broadcast): Replace
	ix86_gen_scratch_sse_rtx with gen_reg_rtx.
	(ix86_expand_vector_move): Ditto.
	* config/i386/i386-protos.h (ix86_gen_scratch_sse_rtx):
	Removed.
	* config/i386/i386.cc (ix86_gen_scratch_sse_rtx): Removed.
	(TARGET_GEN_MEMSET_SCRATCH_RTX): Removed.
	* doc/tm.texi: Remove TARGET_GEN_MEMSET_SCRATCH_RTX.
	* doc/tm.texi.in: Ditto.
	* target.def: Ditto.

2023-03-22  Vladimir N. Makarov  <vmakarov@redhat.com>

	* lra.cc (lra): Do not repeat inheritance and live range splitting
	when asm error is found.

2023-03-22  Andrew Jenner  <andrew@codesourcery.com>

	* config/gcn/gcn-protos.h (gcn_expand_dpp_swap_pairs_insn)
	(gcn_expand_dpp_distribute_even_insn)
	(gcn_expand_dpp_distribute_odd_insn): Declare.
	* config/gcn/gcn-valu.md (@dpp_swap_pairs<mode>)
	(@dpp_distribute_even<mode>, @dpp_distribute_odd<mode>)
	(cmul<conj_op><mode>3, cml<addsub_as><mode>4, vec_addsub<mode>3)
	(cadd<rot><mode>3, vec_fmaddsub<mode>4, vec_fmsubadd<mode>4)
	(fms<mode>4<exec>, fms<mode>4_negop2<exec>, fms<mode>4)
	(fms<mode>4_negop2): New patterns.
	* config/gcn/gcn.cc (gcn_expand_dpp_swap_pairs_insn)
	(gcn_expand_dpp_distribute_even_insn)
	(gcn_expand_dpp_distribute_odd_insn): New functions.
	* config/gcn/gcn.md: Add entries to unspec enum.

2023-03-22  Aldy Hernandez  <aldyh@redhat.com>

	PR tree-optimization/109008
	* value-range.cc (frange::set): Add nan_state argument.
	* value-range.h (class nan_state): New.
	(frange::get_nan_state): New.

2023-03-22  Martin Liska  <mliska@suse.cz>

	* configure: Regenerate.

2023-03-21  Joseph Myers  <joseph@codesourcery.com>

	* stor-layout.cc (finalize_type_size): Copy TYPE_TYPELESS_STORAGE
	to variants.

2023-03-21  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/109192
	* gimple-range-gori.cc (gori_compute::compute_operand_range):
	Terminate gori calculations if a relation is not relevant.
	* value-relation.h (value_relation::set_relation): Allow
	equality between op1 and op2 if they are the same.

2023-03-21  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/109219
	* tree-vect-loop.cc (vectorizable_reduction): Check
	slp_node, not STMT_SLP_TYPE.
	* tree-vect-stmts.cc (vectorizable_condition): Likewise.
	* tree-vect-slp.cc (vect_slp_analyze_node_operations_1):
	Remove assertion on STMT_SLP_TYPE.

2023-03-21  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/109215
	* tree.h (enum special_array_member): Adjust comments for int_0
	and trail_0.
	* tree.cc (component_ref_sam_type): Clear zero_elts if memtype
	has zero sized element type and the array has variable number of
	elements or constant one or more elements.
	(component_ref_size): Adjust comments, formatting fix.

2023-03-21  Arsen Arsenović  <arsen@aarsen.me>

	* configure.ac: Add check for the Texinfo 6.8
	CONTENTS_OUTPUT_LOCATION customization variable and set it if
	supported.
	* configure: Regenerate.
	* Makefile.in (MAKEINFO_TOC_INLINE_FLAG): New variable.  Set by
	configure.ac to -c CONTENTS_OUTPUT_LOCATION=inline if
	CONTENTS_OUTPUT_LOCATION support is detected, empty otherwise.
	($(build_htmldir)/%/index.html): Pass MAKEINFO_TOC_INLINE_FLAG.

2023-03-21  Arsen Arsenović  <arsen@aarsen.me>

	* doc/extend.texi: Associate use_hazard_barrier_return index
	entry with its attribute.
	* doc/invoke.texi: Associate -fcanon-prefix-map index entry with
	its attribute

2023-03-21  Arsen Arsenović  <arsen@aarsen.me>

	* doc/implement-c.texi: Remove usage of @gol.
	* doc/invoke.texi: Ditto.
	* doc/sourcebuild.texi: Ditto.
	* doc/include/gcc-common.texi: Remove @gol.  In new Makeinfo and
	texinfo.tex versions, the bug it was working around appears to
	be gone.

2023-03-21  Arsen Arsenović  <arsen@aarsen.me>

	* doc/include/texinfo.tex: Update to 2023-01-17.19.

2023-03-21  Arsen Arsenović  <arsen@aarsen.me>

	* doc/include/gcc-common.texi: Add @defbuiltin{,x} and
	@enddefbuiltin for defining built-in functions.
	* doc/extend.texi: Apply @defbuiltin{,x} to many, but not all,
	places where it should be used.

2023-03-21  Arsen Arsenović  <arsen@aarsen.me>

	* doc/extend.texi (Formatted Output Function Checking): New
	subsection for  grouping together printf et al.
	(Exception handling) Fix missing @ sign before copyright
	header, which lead to the copyright line leaking into
	'(gcc)Exception handling'.
	* doc/gcc.texi: Set document language to en_US.
	(@copying): Wrap front cover texts in quotations, move in manual
	description text.

2023-03-21  Arsen Arsenović  <arsen@aarsen.me>

	* doc/gcc.texi: Add the Indices appendix, to make texinfo
	generate nice indices overview page.

2023-03-21  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/109170
	* gimple-range-op.cc (cfn_pass_through_arg1): New.
	(gimple_range_op_handler::maybe_builtin_call): Handle
	__builtin_expect via cfn_pass_through_arg1.

2023-03-20   Michael Meissner  <meissner@linux.ibm.com>

	PR target/109067
	* config/rs6000/rs6000.cc (create_complex_muldiv): Delete.
	(init_float128_ieee): Delete code to switch complex multiply and divide
	for long double.
	(complex_multiply_builtin_code): New helper function.
	(complex_divide_builtin_code): Likewise.
	(rs6000_mangle_decl_assembler_name): Add support for mangling the name
	of complex 128-bit multiply and divide built-in functions.

2023-03-20  Peter Bergner  <bergner@linux.ibm.com>

	PR target/109178
	* config/rs6000/rs6000-builtin.cc (stv_expand_builtin): Use tmode.

2023-03-19  Jonny Grant  <jg@jguk.org>

	* doc/extend.texi (Common Function Attributes) <nonnull>:
	Correct typo.

2023-03-18  Peter Bergner  <bergner@linux.ibm.com>

	PR rtl-optimization/109179
	* lra-constraints.cc (combine_reload_insn): Enforce TO is not a debug
	insn or note.  Move the tests earlier to guard lra_get_insn_recog_data.

2023-03-17  Jakub Jelinek  <jakub@redhat.com>

	PR target/105554
	* function.h (push_struct_function): Add ABSTRACT_P argument defaulted
	to false.
	* function.cc (push_struct_function): Add ABSTRACT_P argument, pass it
	to allocate_struct_function instead of false.
	* tree-inline.cc (initialize_cfun): Don't copy DECL_ARGUMENTS
	nor DECL_RESULT here.  Pass true as ABSTRACT_P to
	push_struct_function.  Call targetm.target_option.relayout_function
	after it.
	(tree_function_versioning): Formatting fix.

2023-03-17  Vladimir N. Makarov  <vmakarov@redhat.com>

	* lra-constraints.cc: Include hooks.h.
	(combine_reload_insn): New function.
	(lra_constraints): Call it.

2023-03-17  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>
	    kito-cheng  <kito.cheng@sifive.com>

	* config/riscv/riscv-v.cc (legitimize_move): Allow undef value
	as legitimate value.
	* config/riscv/riscv-vector-builtins.cc
	(function_expander::use_ternop_insn): Fix bugs of ternary intrinsic.
	(function_expander::use_widen_ternop_insn): Ditto.
	* config/riscv/vector.md (@vundefined<mode>): New pattern.
	(pred_mul_<optab><mode>_undef_merge): Remove.
	(*pred_mul_<optab><mode>_undef_merge_scalar): Ditto.
	(*pred_mul_<optab><mode>_undef_merge_extended_scalar): Ditto.
	(pred_neg_mul_<optab><mode>_undef_merge): Ditto.
	(*pred_neg_mul_<optab><mode>_undef_merge_scalar): Ditto.

2023-03-17  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	PR target/109092
	* config/riscv/riscv.md: Fix subreg bug.

2023-03-17  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/108685
	* omp-expand.cc (expand_omp_for_ordered_loops): Add L0_BB argument,
	use its loop_father rather than BODY_BB's loop_father.
	(expand_omp_for_generic): Adjust expand_omp_for_ordered_loops caller.
	If broken_loop with ordered > collapse and at least one of those
	extra loops aren't guaranteed to have at least one iteration, change
	l0_bb's loop_father to entry_bb's loop_father.  Set cont_bb's
	loop_father to l0_bb's loop_father rather than l1_bb's.

2023-03-17  Jakub Jelinek  <jakub@redhat.com>

	PR plugins/108634
	* gdbhooks.py (TreePrinter.to_string): Wrap
	gdb.parse_and_eval('tree_code_type') in a try block, parse
	and eval 'tree_code_type_tmpl<0>::tree_code_type' instead if it
	raises exception.  Update comments for the recent tree_code_type
	changes.

2023-03-17  Sandra Loosemore  <sandra@codesourcery.com>

	* doc/extend.texi (BPF Built-in Functions): Fix numerous markup
	issues.  Add more line breaks to example so it doesn't overflow
	the margins.

2023-03-17  Sandra Loosemore  <sandra@codesourcery.com>

	* doc/extend.texi (Common Function Attributes) <access>: Fix bad
	line breaks in examples.
	<malloc>: Fix bad line breaks in running text, also copy-edit
	for consistency.
	(Extended Asm) <Generic Operand Modifiers>: Fix @multitable width.
	* doc/invoke.texi (Option Summary) <Developer Options>: Fix misplaced
	@gol.
	(C++ Dialect Options) <-fcontracts>: Add line break in example.
	<-Wctad-maybe-unsupported>: Likewise.
	<-Winvalid-constexpr>: Likewise.
	(Warning Options) <-Wdangling-pointer>: Likewise.
	<-Winterference-size>: Likewise.
	<-Wvla-parameter>: Likewise.
	(Static Analyzer Options): Fix bad line breaks in running text,
	plus add some missing markup.
	(Optimize Options) <openacc-privatization>: Fix more bad line
	breaks in running text.

2023-03-16  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386-expand.cc (expand_vec_perm_pblendv):
	Handle 8-byte modes only with TARGET_MMX_WITH_SSE.
	(expand_vec_perm_2perm_pblendv): Ditto.

2023-03-16  Martin Liska  <mliska@suse.cz>

	PR middle-end/106133
	* gcc.cc (driver_handle_option): Use x_main_input_basename
	if x_dump_base_name is null.
	* opts.cc (common_handle_option): Likewise.

2023-03-16  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/109123
	* gimple-ssa-warn-access.cc (pass_waccess::warn_invalid_pointer):
	Do not emit -Wuse-after-free late.
	(pass_waccess::check_call): Always check call pointer uses.

2023-03-16  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/109141
	* tree-dfa.h (renumber_gimple_stmt_uids_in_block): New.
	* tree-dfa.cc (renumber_gimple_stmt_uids_in_block): Split
	out from ...
	(renumber_gimple_stmt_uids): ... here and
	(renumber_gimple_stmt_uids_in_blocks): ... here.
	* gimple-ssa-warn-access.cc (pass_waccess::use_after_inval_p):
	Use renumber_gimple_stmt_uids_in_block to also assign UIDs
	to PHIs.
	(pass_waccess::check_pointer_uses): Process all PHIs.

2023-03-15  David Malcolm  <dmalcolm@redhat.com>

	PR analyzer/109097
	* diagnostic-format-sarif.cc (class sarif_invocation): New.
	(class sarif_ice_notification): New.
	(sarif_builder::m_invocation_obj): New field.
	(sarif_invocation::add_notification_for_ice): New.
	(sarif_invocation::prepare_to_flush): New.
	(sarif_ice_notification::sarif_ice_notification): New.
	(sarif_builder::sarif_builder): Add m_invocation_obj.
	(sarif_builder::end_diagnostic): Special-case DK_ICE and
	DK_ICE_NOBT.
	(sarif_builder::flush_to_file): Call prepare_to_flush on
	m_invocation_obj.  Pass the latter to make_top_level_object.
	(sarif_builder::make_result_object): Move creation of "locations"
	array to...
	(sarif_builder::make_locations_arr): ...this new function.
	(sarif_builder::make_top_level_object): Add "invocation_obj" param
	and pass it to make_run_object.
	(sarif_builder::make_run_object): Add "invocation_obj" param and
	use it.
	(sarif_ice_handler): New callback.
	(diagnostic_output_format_init_sarif): Wire up sarif_ice_handler.
	* diagnostic.cc (diagnostic_initialize): Initialize new field
	"ice_handler_cb".
	(diagnostic_action_after_output): If it is set, make one attempt
	to call ice_handler_cb.
	* diagnostic.h (diagnostic_context::ice_handler_cb): New field.

2023-03-15  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386-expand.cc (expand_vec_perm_blend):
	Handle 8-byte modes only with TARGET_MMX_WITH_SSE. Handle V2SFmode
	and fix V2HImode handling.
	(expand_vec_perm_1): Try to emit BLEND instruction
	before MOVSS/MOVSD.
	* config/i386/mmx.md (*mmx_blendps): New insn pattern.

2023-03-15  Tobias Burnus  <tobias@codesourcery.com>

	* omp-low.cc (omp_runtime_api_call): Add omp_in_explicit_task.

2023-03-15  Richard Biener  <rguenther@suse.de>

	* gimple-ssa-warn-access.cc (pass_waccess::check_pointer_uses):
	Do not diagnose clobbers.

2023-03-15  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/109139
	* tree-ssa-live.cc (remove_unused_locals): Look at the
	base address for unused decls on the LHS of .DEFERRED_INIT.

2023-03-15  Xi Ruoyao  <xry111@xry111.site>

	PR other/109086
	* builtins.cc (inline_string_cmp): Force the character
	difference into "result" pseudo-register, instead of reassign
	the pseudo-register.

2023-03-15  Christoph Müllner  <christoph.muellner@vrull.eu>

	* config.gcc: Add thead.o to RISC-V extra_objs.
	* config/riscv/peephole.md: Add mempair peephole passes.
	* config/riscv/riscv-protos.h (riscv_split_64bit_move_p): New
	prototype.
	(th_mempair_operands_p): Likewise.
	(th_mempair_order_operands): Likewise.
	(th_mempair_prepare_save_restore_operands): Likewise.
	(th_mempair_save_restore_regs): Likewise.
	(th_mempair_output_move): Likewise.
	* config/riscv/riscv.cc (riscv_save_reg): Move code.
	(riscv_restore_reg): Move code.
	(riscv_for_each_saved_reg): Add code to emit mempair insns.
	* config/riscv/t-riscv: Add thead.cc.
	* config/riscv/thead.md (*th_mempair_load_<GPR:mode>2):
	New insn.
	(*th_mempair_store_<GPR:mode>2): Likewise.
	(*th_mempair_load_extendsidi2): Likewise.
	(*th_mempair_load_zero_extendsidi2): Likewise.
	* config/riscv/thead.cc: New file.

2023-03-15  Christoph Müllner  <christoph.muellner@vrull.eu>

	* config/riscv/constraints.md (TARGET_XTHEADFMV ? FP_REGS : NO_REGS)
	New constraint "th_f_fmv".
	(TARGET_XTHEADFMV ? GR_REGS : NO_REGS): New constraint
	"th_r_fmv".
	* config/riscv/riscv.cc (riscv_split_doubleword_move):
	Add split code for XTheadFmv.
	(riscv_secondary_memory_needed): XTheadFmv does not need
	secondary memory.
	* config/riscv/riscv.md: Add new UNSPEC_XTHEADFMV and
	UNSPEC_XTHEADFMV_HW. Add support for XTheadFmv to
	movdf_hardfloat_rv32.
	* config/riscv/thead.md (th_fmv_hw_w_x): New INSN.
	(th_fmv_x_w): New INSN.
	(th_fmv_x_hw): New INSN.

2023-03-15  Christoph Müllner  <christoph.muellner@vrull.eu>

	* config/riscv/riscv.md (maddhisi4): New expand.
	(msubhisi4): New expand.
	* config/riscv/thead.md (*th_mula<mode>): New pattern.
	(*th_mulawsi): New pattern.
	(*th_mulawsi2): New pattern.
	(*th_maddhisi4): New pattern.
	(*th_sextw_maddhisi4): New pattern.
	(*th_muls<mode>): New pattern.
	(*th_mulswsi): New pattern.
	(*th_mulswsi2): New pattern.
	(*th_msubhisi4): New pattern.
	(*th_sextw_msubhisi4): New pattern.

2023-03-15  Christoph Müllner  <christoph.muellner@vrull.eu>

	* config/riscv/iterators.md (TARGET_64BIT): Add GPR2 iterator.
	* config/riscv/riscv-protos.h (riscv_expand_conditional_move):
	Add prototype.
	* config/riscv/riscv.cc (riscv_rtx_costs): Add costs for
	XTheadCondMov.
	(riscv_expand_conditional_move): New function.
	(riscv_expand_conditional_move_onesided): New function.
	* config/riscv/riscv.md: Add support for XTheadCondMov.
	* config/riscv/thead.md (*th_cond_mov<GPR:mode><GPR2:mode>): Add
	support for XTheadCondMov.
	(*th_cond_gpr_mov<GPR:mode><GPR2:mode>): Likewise.

2023-03-15  Christoph Müllner  <christoph.muellner@vrull.eu>

	* config/riscv/bitmanip.md (clzdi2): New expand.
	(clzsi2): New expand.
	(ctz<mode>2): New expand.
	(popcount<mode>2): New expand.
	(<bitmanip_optab>si2): Rename INSN.
	(*<bitmanip_optab>si2): Hide INSN name.
	(<bitmanip_optab>di2): Rename INSN.
	(*<bitmanip_optab>di2): Hide INSN name.
	(rotrsi3): Remove INSN.
	(rotr<mode>3): Add expand.
	(*rotrsi3): New INSN.
	(rotrdi3): Rename INSN.
	(*rotrdi3): Hide INSN name.
	(rotrsi3_sext): Rename INSN.
	(*rotrsi3_sext): Hide INSN name.
	(bswap<mode>2): Remove INSN.
	(bswapdi2): Add expand.
	(bswapsi2): Add expand.
	(*bswap<mode>2): Hide INSN name.
	* config/riscv/riscv.cc (riscv_rtx_costs): Add costs for sign
	extraction.
	* config/riscv/riscv.md (extv<mode>): New expand.
	(extzv<mode>): New expand.
	* config/riscv/thead.md (*th_srri<mode>3): New INSN.
	(*th_ext<mode>): New INSN.
	(*th_extu<mode>): New INSN.
	(*th_clz<mode>2): New INSN.
	(*th_rev<mode>2): New INSN.

2023-03-15  Christoph Müllner  <christoph.muellner@vrull.eu>

	* config/riscv/riscv.cc (riscv_rtx_costs): Add xthead:tst cost.
	* config/riscv/thead.md (*th_tst<mode>3): New INSN.

2023-03-15  Christoph Müllner  <christoph.muellner@vrull.eu>

	* config/riscv/riscv.md: Include thead.md
	* config/riscv/thead.md: New file.

2023-03-15  Christoph Müllner  <christoph.muellner@vrull.eu>

	* config/riscv/riscv-cores.def (RISCV_CORE): Add "thead-c906".

2023-03-15  Christoph Müllner  <christoph.muellner@vrull.eu>

	* common/config/riscv/riscv-common.cc: Add xthead* extensions.
	* config/riscv/riscv-opts.h (MASK_XTHEADBA): New.
	(MASK_XTHEADBB): New.
	(MASK_XTHEADBS): New.
	(MASK_XTHEADCMO): New.
	(MASK_XTHEADCONDMOV): New.
	(MASK_XTHEADFMEMIDX): New.
	(MASK_XTHEADFMV): New.
	(MASK_XTHEADINT): New.
	(MASK_XTHEADMAC): New.
	(MASK_XTHEADMEMIDX): New.
	(MASK_XTHEADMEMPAIR): New.
	(MASK_XTHEADSYNC): New.
	(TARGET_XTHEADBA): New.
	(TARGET_XTHEADBB): New.
	(TARGET_XTHEADBS): New.
	(TARGET_XTHEADCMO): New.
	(TARGET_XTHEADCONDMOV): New.
	(TARGET_XTHEADFMEMIDX): New.
	(TARGET_XTHEADFMV): New.
	(TARGET_XTHEADINT): New.
	(TARGET_XTHEADMAC): New.
	(TARGET_XTHEADMEMIDX): New.
	(TARGET_XTHEADMEMPAIR): new.
	(TARGET_XTHEADSYNC): New.
	* config/riscv/riscv.opt: Add riscv_xthead_subext.

2023-03-15  Hu, Lin1  <lin1.hu@intel.com>

	PR target/109117
	* config/i386/i386-builtin.def (__builtin_ia32_vaesdec_v16qi,
	__builtin_ia32_vaesdeclast_v16qi,__builtin_ia32_vaesenc_v16qi,
	__builtin_ia32_vaesenclast_v16qi): Require OPTION_MASK_ISA_AVX512VL.

2023-03-14  Jakub Jelinek  <jakub@redhat.com>

	PR target/109109
	* config/i386/i386-expand.cc (split_double_concat): Fix splitting
	when lo is equal to dhi and hi is a MEM which uses dlo register.

2023-03-14  Martin Jambor  <mjambor@suse.cz>

	PR ipa/107925
	* ipa-cp.cc (update_profiling_info): Drop counts of orig_node to
	global0 instead of zeroing when it does not have as many counts as
	it should.

2023-03-14  Martin Jambor  <mjambor@suse.cz>

	PR ipa/107925
	* ipa-cp.cc (update_specialized_profile): Drop orig_node_count to
	ipa count, remove assert, lenient_count_portion_handling, dump
	also orig_node_count.

2023-03-14  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386-expand.cc (expand_vec_perm_movs):
	Handle V2SImode for TARGET_MMX_WITH_SSE.
	* config/i386/mmx.md (*mmx_movss_<mode>): Rename from *mmx_movss
	using V2FI mode iterator to handle both V2SI and V2SF modes.

2023-03-14  Sam James  <sam@gentoo.org>

	* config/riscv/genrvv-type-indexer.cc: Avoid calloc() poisoning on musl by
	including <sstream> earlier.
	* system.h: Add INCLUDE_SSTREAM.

2023-03-14  Richard Biener  <rguenther@suse.de>

	* tree-ssa-live.cc (remove_unused_locals): Do not treat
	the .DEFERRED_INIT of a variable as use, instead remove
	that if it is the only use.

2023-03-14  Eric Botcazou  <ebotcazou@adacore.com>

	PR rtl-optimization/107762
	* expr.cc (emit_group_store): Revert latest change.

2023-03-14  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	PR tree-optimization/109005
	* tree-if-conv.cc (get_bitfield_rep): Replace BLKmode check with
	aggregate type check.

2023-03-14  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/109115
	* tree-vect-patterns.cc (vect_recog_divmod_pattern): Don't use
	r.upper_bound () on r.undefined_p () range.

2023-03-14  Jan Hubicka  <hubicka@ucw.cz>

	PR tree-optimization/106896
	* profile-count.cc (profile_count::to_sreal_scale): Synchronize
	implementatoin with probability_in; avoid some asserts.

2023-03-13  Max Filippov  <jcmvbkbc@gmail.com>

	* config/xtensa/linux.h (TARGET_ASM_FILE_END): New macro.

2023-03-13  Sean Bright  <sean@seanbright.com>

	* doc/invoke.texi (Warning Options): Remove errant 'See'
	before @xref.

2023-03-13  Takayuki 'January June' Suwa  <jjsuwa_sys3175@yahoo.co.jp>

	* config/xtensa/xtensa.h (REG_OK_STRICT, REG_OK_FOR_INDEX_P,
	REG_OK_FOR_BASE_P): Remove.

2023-03-13  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/vector-iterators.md (=vd,vr): Fine tune.
	(=vd,vd,vr,vr): Ditto.
	* config/riscv/vector.md: Ditto.

2023-03-13  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vector-builtins.cc
	(function_expander::use_compare_insn): Add operand predicate check.

2023-03-13  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/vector.md: Fine tune RA constraints.

2023-03-13  Tobias Burnus  <tobias@codesourcery.com>

	* config/gcn/mkoffload.cc (main): Pass -save-temps on for the
	hsaco assemble/link.

2023-03-13  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/109046
	* tree-ssa-forwprop.cc (pass_forwprop::execute): Combine
	piecewise complex loads.

2023-03-12  Jakub Jelinek  <jakub@redhat.com>

	* config/aarch64/aarch64.h (aarch64_bf16_type_node): Remove.
	(aarch64_bf16_ptr_type_node): Adjust comment.
	* config/aarch64/aarch64.cc (aarch64_gimplify_va_arg_expr): Use
	bfloat16_type_node rather than aarch64_bf16_type_node.
	(aarch64_libgcc_floating_mode_supported_p,
	aarch64_scalar_mode_supported_p): Also support BFmode.
	(aarch64_invalid_conversion, aarch64_invalid_unary_op): Remove.
	(aarch64_invalid_binary_op): Remove BFmode related rejections.
	(TARGET_INVALID_CONVERSION, TARGET_INVALID_UNARY_OP): Don't redefine.
	* config/aarch64/aarch64-builtins.cc (aarch64_bf16_type_node): Remove.
	(aarch64_int_or_fp_type): Use bfloat16_type_node rather than
	aarch64_bf16_type_node.
	(aarch64_init_simd_builtin_types): Likewise.
	(aarch64_init_bf16_types): Likewise.  Don't create bfloat16_type_node,
	which is created in tree.cc already.
	* config/aarch64/aarch64-sve-builtins.def (svbfloat16_t): Likewise.

2023-03-12  Roger Sayle  <roger@nextmovesoftware.com>

	PR middle-end/109031
	* tree-chrec.cc (chrec_apply): When folding "{a, +, a} (x-1)",
	ensure that the type of x is as wide or wider than the type of a.

2023-03-12  Tamar Christina  <tamar.christina@arm.com>

	PR target/108583
	* config/aarch64/aarch64-simd.md (@aarch64_bitmask_udiv<mode>3): Remove.
	(*bitmask_shift_plus<mode>): New.
	* config/aarch64/aarch64-sve2.md (*bitmask_shift_plus<mode>): New.
	(@aarch64_bitmask_udiv<mode>3): Remove.
	* config/aarch64/aarch64.cc
	(aarch64_vectorize_can_special_div_by_constant,
	TARGET_VECTORIZE_CAN_SPECIAL_DIV_BY_CONST): Removed.
	(TARGET_VECTORIZE_PREFERRED_DIV_AS_SHIFTS_OVER_MULT,
	aarch64_vectorize_preferred_div_as_shifts_over_mult): New.

2023-03-12  Tamar Christina  <tamar.christina@arm.com>

	PR target/108583
	* target.def (preferred_div_as_shifts_over_mult): New.
	* doc/tm.texi.in: Document it.
	* doc/tm.texi: Regenerate.
	* targhooks.cc (default_preferred_div_as_shifts_over_mult): New.
	* targhooks.h (default_preferred_div_as_shifts_over_mult): New.
	* tree-vect-patterns.cc (vect_recog_divmod_pattern): Use it.

2023-03-12  Tamar Christina  <tamar.christina@arm.com>
	    Richard Sandiford  <richard.sandiford@arm.com>

	PR target/108583
	* tree-ssa-math-opts.cc (convert_mult_to_fma): Inhibit FMA in case not
	single use.

2023-03-12  Tamar Christina  <tamar.christina@arm.com>
	    Andrew MacLeod  <amacleod@redhat.com>

	PR target/108583
	* gimple-range-op.h (gimple_range_op_handler): Add maybe_non_standard.
	* gimple-range-op.cc (gimple_range_op_handler::gimple_range_op_handler):
	Use it.
	(gimple_range_op_handler::maybe_non_standard): New.
	* range-op.cc (class operator_widen_plus_signed,
	operator_widen_plus_signed::wi_fold, class operator_widen_plus_unsigned,
	operator_widen_plus_unsigned::wi_fold, class operator_widen_mult_signed,
	operator_widen_mult_signed::wi_fold, class operator_widen_mult_unsigned,
	operator_widen_mult_unsigned::wi_fold,
	ptr_op_widen_mult_signed, ptr_op_widen_mult_unsigned,
	ptr_op_widen_plus_signed, ptr_op_widen_plus_unsigned): New.
	* range-op.h (ptr_op_widen_mult_signed, ptr_op_widen_mult_unsigned,
	ptr_op_widen_plus_signed, ptr_op_widen_plus_unsigned): New

2023-03-12  Tamar Christina  <tamar.christina@arm.com>

	PR target/108583
	* doc/tm.texi (TARGET_VECTORIZE_CAN_SPECIAL_DIV_BY_CONST): Remove.
	* doc/tm.texi.in: Likewise.
	* explow.cc (round_push, align_dynamic_address): Revert previous patch.
	* expmed.cc (expand_divmod): Likewise.
	* expmed.h (expand_divmod): Likewise.
	* expr.cc (force_operand, expand_expr_divmod): Likewise.
	* optabs.cc (expand_doubleword_mod, expand_doubleword_divmod): Likewise.
	* target.def (can_special_div_by_const): Remove.
	* target.h: Remove tree-core.h include
	* targhooks.cc (default_can_special_div_by_const): Remove.
	* targhooks.h (default_can_special_div_by_const): Remove.
	* tree-vect-generic.cc (expand_vector_operation): Remove hook.
	* tree-vect-patterns.cc (vect_recog_divmod_pattern): Remove hook.
	* tree-vect-stmts.cc (vectorizable_operation): Remove hook.

2023-03-12  Sandra Loosemore  <sandra@codesourcery.com>

	* doc/install.texi2html: Fix issue number typo in comment.

2023-03-12  Gaius Mulley  <gaiusmod2@gmail.com>

	* doc/gm2.texi (Elementary data types): Equivalence BOOLEAN with
	bool.

2023-03-12  Sandra Loosemore  <sandra@codesourcery.com>

	* doc/invoke.texi (Optimize Options):  Add markup to
	description of asan-kernel-mem-intrinsic-prefix, and clarify
	wording slightly.

2023-03-11  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/extend.texi (Named Address Spaces): Drop a redundant link
	to AVR-LibC.

2023-03-11  Jeff Law  <jlaw@ventanamicro>

	PR web/88860
	* doc/extend.texi: Clarify Attribute Syntax a bit.

2023-03-11  Sandra Loosemore  <sandra@codesourcery.com>

	* doc/install.texi (Prerequisites): Suggest using newer versions
	of Texinfo.
	(Final install): Clean up and modernize discussion of how to
	build or obtain the GCC manuals.
	* doc/install.texi2html: Update comment to point to the PR instead
	of "makeinfo 4.7 brokenness" (it's not specific to that version).

2023-03-10  Jakub Jelinek  <jakub@redhat.com>

	PR target/107703
	* optabs.cc (expand_fix): For conversions from BFmode to integral,
	use shifts to convert it to SFmode first and then convert SFmode
	to integral.

2023-03-10  Andrew Pinski  <apinski@marvell.com>

	* config/aarch64/aarch64.md: Add a new define_split
	to help combine.

2023-03-10  Richard Biener  <rguenther@suse.de>

	* tree-ssa-structalias.cc (solve_graph): Immediately
	iterate self-cycles.

2023-03-10  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/109008
	* range-op-float.cc (float_widen_lhs_range): If not
	-frounding-math and not IBM double double format, extend lhs
	range just by 0.5ulp rather than 1ulp in each direction.

2023-03-10  Jakub Jelinek  <jakub@redhat.com>

	PR target/107998
	* config.gcc (x86_64-*-cygwin*): Don't add i386/t-cygwin-w64 into
	$tmake_file.
	* config/i386/t-cygwin-w64: Remove.

2023-03-10  Jakub Jelinek  <jakub@redhat.com>

	PR plugins/108634
	* tree-core.h (tree_code_type, tree_code_length): For C++11 or
	C++14, don't declare as extern const arrays.
	(tree_code_type_tmpl, tree_code_length_tmpl): New types with
	static constexpr member arrays for C++11 or C++14.
	* tree.h (TREE_CODE_CLASS): For C++11 or C++14 use
	tree_code_type_tmpl <0>::tree_code_type instead of tree_code_type.
	(TREE_CODE_LENGTH): For C++11 or C++14 use
	tree_code_length_tmpl <0>::tree_code_length instead of
	tree_code_length.
	* tree.cc (tree_code_type, tree_code_length): Remove.

2023-03-10  Jakub Jelinek  <jakub@redhat.com>

	PR other/108464
	* common.opt (fcanon-prefix-map): New option.
	* opts.cc: Include file-prefix-map.h.
	(flag_canon_prefix_map): New variable.
	(common_handle_option): Handle OPT_fcanon_prefix_map.
	(gen_command_line_string): Ignore OPT_fcanon_prefix_map.
	* file-prefix-map.h (flag_canon_prefix_map): Declare.
	* file-prefix-map.cc (struct file_prefix_map): Add canonicalize
	member.
	(add_prefix_map): Initialize canonicalize member from
	flag_canon_prefix_map, and if true canonicalize it using lrealpath.
	(remap_filename): Revert 2022-11-01 and 2022-11-07 changes,
	use lrealpath result only for map->canonicalize map entries.
	* lto-opts.cc (lto_write_options): Ignore OPT_fcanon_prefix_map.
	* opts-global.cc (handle_common_deferred_options): Clear
	flag_canon_prefix_map at the start and handle OPT_fcanon_prefix_map.
	* doc/invoke.texi (-fcanon-prefix-map): Document.
	(-ffile-prefix-map, -fdebug-prefix-map, -fprofile-prefix-map): Add
	see also for -fcanon-prefix-map.
	* doc/cppopts.texi (-fmacro-prefix-map): Likewise.

2023-03-10  Jakub Jelinek  <jakub@redhat.com>

	PR c/108079
	* cgraphunit.cc (check_global_declaration): Don't warn for unused
	variables which have OPT_Wunused_variable warning suppressed.

2023-03-10  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/109008
	* range-op-float.cc (float_widen_lhs_range): If lb is
	minimum representable finite number or ub is maximum
	representable finite number, instead of widening it to
	-inf or inf widen it to negative or positive 0x0.8p+(EMAX+1).
	Temporarily clear flag_finite_math_only when canonicalizing
	the widened range.

2023-03-10  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-builtins.cc (riscv_gimple_fold_builtin): New function.
	* config/riscv/riscv-protos.h (riscv_gimple_fold_builtin): Ditto.
	(gimple_fold_builtin):  Ditto.
	* config/riscv/riscv-vector-builtins-bases.cc (class read_vl): New class.
	(class vleff): Ditto.
	(BASE): Ditto.
	* config/riscv/riscv-vector-builtins-bases.h: Ditto.
	* config/riscv/riscv-vector-builtins-functions.def (read_vl): Ditto.
	(vleff): Ditto.
	* config/riscv/riscv-vector-builtins-shapes.cc (struct read_vl_def): Ditto.
	(struct fault_load_def): Ditto.
	(SHAPE): Ditto.
	* config/riscv/riscv-vector-builtins-shapes.h: Ditto.
	* config/riscv/riscv-vector-builtins.cc
	(rvv_arg_type_info::get_tree_type): Add size_ptr.
	(gimple_folder::gimple_folder): New class.
	(gimple_folder::fold): Ditto.
	(gimple_fold_builtin): New function.
	(get_read_vl_instance): Ditto.
	(get_read_vl_decl): Ditto.
	* config/riscv/riscv-vector-builtins.def (size_ptr): Add size_ptr.
	* config/riscv/riscv-vector-builtins.h (class gimple_folder): New class.
	(get_read_vl_instance): New function.
	(get_read_vl_decl):  Ditto.
	* config/riscv/riscv-vsetvl.cc (fault_first_load_p): Ditto.
	(read_vl_insn_p): Ditto.
	(available_occurrence_p): Ditto.
	(backward_propagate_worthwhile_p): Ditto.
	(gen_vsetvl_pat): Adapt for vleff support.
	(get_forward_read_vl_insn): New function.
	(get_backward_fault_first_load_insn): Ditto.
	(source_equal_p): Adapt for vleff support.
	(first_ratio_invalid_for_second_sew_p): Remove.
	(first_ratio_invalid_for_second_lmul_p): Ditto.
	(first_lmul_less_than_second_lmul_p): Ditto.
	(first_ratio_less_than_second_ratio_p): Ditto.
	(support_relaxed_compatible_p): New function.
	(vector_insn_info::operator>): Remove.
	(vector_insn_info::operator>=): Refine.
	(vector_insn_info::parse_insn): Adapt for vleff support.
	(vector_insn_info::compatible_p): Ditto.
	(vector_insn_info::update_fault_first_load_avl): New function.
	(pass_vsetvl::transfer_after): Adapt for vleff support.
	(pass_vsetvl::demand_fusion): Ditto.
	(pass_vsetvl::cleanup_insns): Ditto.
	* config/riscv/riscv-vsetvl.def (DEF_INCOMPATIBLE_COND): Remove
	redundant condtions.
	* config/riscv/riscv-vsetvl.h (struct demands_cond): New function.
	* config/riscv/riscv.cc (TARGET_GIMPLE_FOLD_BUILTIN): New target hook.
	* config/riscv/riscv.md: Adapt for vleff support.
	* config/riscv/t-riscv: Ditto.
	* config/riscv/vector-iterators.md: New iterator.
	* config/riscv/vector.md (read_vlsi): New pattern.
	(read_vldi_zero_extend): Ditto.
	(@pred_fault_load<mode>): Ditto.

2023-03-10  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vector-builtins.cc
	(function_expander::use_ternop_insn): Use maybe_gen_insn instead.
	(function_expander::use_widen_ternop_insn): Ditto.
	* optabs.cc (maybe_gen_insn): Extend nops handling.

2023-03-10  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vector-builtins-bases.cc: Split indexed load
	patterns according to RVV ISA.
	* config/riscv/vector-iterators.md: New iterators.
	* config/riscv/vector.md
	(@pred_indexed_<order>load<VNX1_QHSD:mode><VNX1_QHSDI:mode>): Remove.
	(@pred_indexed_<order>load<mode>_same_eew): New pattern.
	(@pred_indexed_<order>load<mode>_x2_greater_eew): Ditto.
	(@pred_indexed_<order>load<mode>_x4_greater_eew): Ditto.
	(@pred_indexed_<order>load<mode>_x8_greater_eew): Ditto.
	(@pred_indexed_<order>load<mode>_x2_smaller_eew): Ditto.
	(@pred_indexed_<order>load<mode>_x4_smaller_eew): Ditto.
	(@pred_indexed_<order>load<mode>_x8_smaller_eew): Ditto.
	(@pred_indexed_<order>load<VNX2_QHSD:mode><VNX2_QHSDI:mode>): Remove.
	(@pred_indexed_<order>load<VNX4_QHSD:mode><VNX4_QHSDI:mode>): Ditto.
	(@pred_indexed_<order>load<VNX8_QHSD:mode><VNX8_QHSDI:mode>): Ditto.
	(@pred_indexed_<order>load<VNX16_QHS:mode><VNX16_QHSI:mode>): Ditto.
	(@pred_indexed_<order>load<VNX32_QH:mode><VNX32_QHI:mode>): Ditto.
	(@pred_indexed_<order>load<VNX64_Q:mode><VNX64_Q:mode>): Ditto.

2023-03-10  Michael Collison  <collison@rivosinc.com>

	* tree-vect-loop-manip.cc (vect_do_peeling): Use
	result of constant_lower_bound instead of vf for the lower
	bound of the epilog loop trip count.

2023-03-09  Tamar Christina  <tamar.christina@arm.com>

	* passes.cc (emergency_dump_function): Finish graph generation.

2023-03-09  Tamar Christina  <tamar.christina@arm.com>

	* config/aarch64/aarch64.md (tbranch_<code><mode>3): Restrict to SHORT
	and bottom bit only.

2023-03-09  Andrew Pinski  <apinski@marvell.com>

	PR tree-optimization/108980
	* gimple-array-bounds.cc (array_bounds_checker::check_array_ref):
	Reorgnize the call to warning for not strict flexible arrays
	to be before the check of warned.

2023-03-09  Jason Merrill  <jason@redhat.com>

	* doc/extend.texi: Comment out __is_deducible docs.

2023-03-09  Jason Merrill  <jason@redhat.com>

	PR c++/105841
	* doc/extend.texi (Type Traits):: Document __is_deducible.

2023-03-09  Costas Argyris  <costas.argyris@gmail.com>

	PR driver/108865
	* config.host: add object for x86_64-*-mingw*.
	* config/i386/sym-mingw32.cc: dummy file to attach
	symbol.
	* config/i386/utf8-mingw32.rc: windres resource file.
	* config/i386/winnt-utf8.manifest: XML manifest to
	enable UTF-8.
	* config/i386/x-mingw32: reference to x-mingw32-utf8.
	* config/i386/x-mingw32-utf8: Makefile fragment to
	embed UTF-8 manifest.

2023-03-09  Vladimir N. Makarov  <vmakarov@redhat.com>

	* lra-constraints.cc (process_alt_operands): Use operand modes for
	clobbered regs instead of the biggest access mode.

2023-03-09  Richard Biener  <rguenther@suse.de>

	PR middle-end/108995
	* fold-const.cc (extract_muldiv_1): Avoid folding
	(CST * b) / CST2 when sanitizing overflow and we rely on
	overflow being undefined.

2023-03-09  Jakub Jelinek  <jakub@redhat.com>
	    Richard Biener  <rguenther@suse.de>

	PR tree-optimization/109008
	* range-op-float.cc (float_widen_lhs_range): New function.
	(foperator_plus::op1_range, foperator_minus::op1_range,
	foperator_minus::op2_range, foperator_mult::op1_range,
	foperator_div::op1_range, foperator_div::op2_range): Use it.

2023-03-07  Jonathan Grant  <jg@jguk.org>

	PR sanitizer/81649
	* doc/invoke.texi (Instrumentation Options):  Clarify
	LeakSanitizer behavior.

2023-03-07  Benson Muite  <benson_muite@emailplus.org>

	* doc/install.texi (Prerequisites): Add link to gmplib.org.

2023-03-07  Pan Li  <pan2.li@intel.com>
	    Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	PR target/108185
	PR target/108654
	* config/riscv/riscv-modes.def (ADJUST_PRECISION): Adjust VNx*BI
	modes.
	* config/riscv/riscv.cc (riscv_v_adjust_precision): New.
	* config/riscv/riscv.h (riscv_v_adjust_precision): New.
	* genmodes.cc (adj_precision): New.
	(ADJUST_PRECISION): New.
	(emit_mode_adjustments): Handle ADJUST_PRECISION.

2023-03-07  Hans-Peter Nilsson  <hp@axis.com>

	* doc/sourcebuild.texi: Document check_effective_target_tail_call.

2023-03-06  Paul-Antoine Arras  <pa@codesourcery.com>

	* config/gcn/gcn-valu.md (<expander><mode>3_exec): Add patterns for
	{s|u}{max|min} in QI, HI and DI modes.
	(<expander><mode>3): Add pattern for {s|u}{max|min} in DI mode.
	(cond_<fexpander><mode>): Add pattern for cond_f{max|min}.
	(cond_<expander><mode>): Add pattern for cond_{s|u}{max|min}.
	* config/gcn/gcn.cc (gcn_spill_class): Allow the exec register to be
	saved in SGPRs.

2023-03-06  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/109025
	* tree-vect-loop.cc (vect_is_simple_reduction): Verify
	the inner LC PHI use is the inner loop PHI latch definition
	before classifying an outer PHI as double reduction.

2023-03-06  Jan Hubicka  <hubicka@ucw.cz>

	PR target/108429
	* config/i386/x86-tune.def (X86_TUNE_USE_SCATTER_2PARTS): Enable for
	generic.
	(X86_TUNE_USE_SCATTER_4PARTS): Likewise.
	(X86_TUNE_USE_SCATTER): Likewise.

2023-03-06  Xi Ruoyao  <xry111@xry111.site>

	PR target/109000
	* config/loongarch/loongarch.h (FP_RETURN): Use
	TARGET_*_FLOAT_ABI instead of TARGET_*_FLOAT.
	(UNITS_PER_FP_ARG): Likewise.

2023-03-05  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vsetvl.cc (reg_available_p): Fix bug.
	(pass_vsetvl::backward_demand_fusion): Ditto.

2023-03-05  Liao Shihua  <shihua@iscas.ac.cn>
	    SiYu Wu  <siyu@isrc.iscas.ac.cn>

	* config/riscv/crypto.md (riscv_sm3p0_<mode>): Add ZKSED's and ZKSH's
	instructions.
	(riscv_sm3p1_<mode>): New.
	(riscv_sm4ed_<mode>): New.
	(riscv_sm4ks_<mode>): New.
	* config/riscv/riscv-builtins.cc (AVAIL): Add ZKSED's and ZKSH's AVAIL.
	* config/riscv/riscv-scalar-crypto.def (RISCV_BUILTIN): Add ZKSED's and
	ZKSH's built-in functions.

2023-03-05  Liao Shihua  <shihua@iscas.ac.cn>
	    SiYu Wu  <siyu@isrc.iscas.ac.cn>

	* config/riscv/crypto.md (riscv_sha256sig0_<mode>): Add ZKNH's instructions.
	(riscv_sha256sig1_<mode>): New.
	(riscv_sha256sum0_<mode>): New.
	(riscv_sha256sum1_<mode>): New.
	(riscv_sha512sig0h): New.
	(riscv_sha512sig0l): New.
	(riscv_sha512sig1h): New.
	(riscv_sha512sig1l): New.
	(riscv_sha512sum0r): New.
	(riscv_sha512sum1r): New.
	(riscv_sha512sig0): New.
	(riscv_sha512sig1): New.
	(riscv_sha512sum0): New.
	(riscv_sha512sum1): New.
	* config/riscv/riscv-builtins.cc (AVAIL): And ZKNH's AVAIL.
	* config/riscv/riscv-scalar-crypto.def (RISCV_BUILTIN): And ZKNH's
	built-in functions.
	(DIRECT_BUILTIN): Add new.

2023-03-05  Liao Shihua  <shihua@iscas.ac.cn>
	    SiYu Wu  <siyu@isrc.iscas.ac.cn>

	* config/riscv/constraints.md (D03): Add constants of bs and rnum.
	(DsA): New.
	* config/riscv/crypto.md (riscv_aes32dsi): Add ZKND's and ZKNE's instructions.
	(riscv_aes32dsmi): New.
	(riscv_aes64ds): New.
	(riscv_aes64dsm): New.
	(riscv_aes64im): New.
	(riscv_aes64ks1i): New.
	(riscv_aes64ks2): New.
	(riscv_aes32esi): New.
	(riscv_aes32esmi): New.
	(riscv_aes64es): New.
	(riscv_aes64esm): New.
	* config/riscv/riscv-builtins.cc (AVAIL): Add ZKND's and ZKNE's AVAIL.
	* config/riscv/riscv-scalar-crypto.def (DIRECT_BUILTIN): Add ZKND's and
	ZKNE's built-in functions.

2023-03-05  Liao Shihua  <shihua@iscas.ac.cn>
	    SiYu Wu  <siyu@isrc.iscas.ac.cn>

	* config/riscv/bitmanip.md: Add ZBKB's instructions.
	* config/riscv/riscv-builtins.cc (AVAIL): Add new.
	* config/riscv/riscv.md: Add new type for crypto instructions.
	* config/riscv/crypto.md: Add Scalar Cryptography extension's machine
	description file.
	* config/riscv/riscv-scalar-crypto.def: Add Scalar Cryptography
	extension's built-in function file.

2023-03-05  Liao Shihua  <shihua@iscas.ac.cn>
	    SiYu Wu  <siyu@isrc.iscas.ac.cn>

	* config/riscv/riscv-builtins.cc (RISCV_FTYPE_NAME2): New.
	(RISCV_FTYPE_NAME3): New.
	(RISCV_ATYPE_QI): New.
	(RISCV_ATYPE_HI): New.
	(RISCV_FTYPE_ATYPES2): New.
	(RISCV_FTYPE_ATYPES3): New.
	* config/riscv/riscv-ftypes.def (2): New.
	(3): New.

2023-03-05  Vineet Gupta  <vineetg@rivosinc.com>

	* config/riscv/riscv.cc (riscv_rtx_costs): Fixed IN_RANGE() to
	use exact_log2().

2023-03-05  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>
	    kito-cheng  <kito.cheng@sifive.com>

	* config/riscv/predicates.md (vector_any_register_operand): New predicate.
	* config/riscv/riscv-c.cc (riscv_check_builtin_call): New function.
	(riscv_register_pragmas): Add builtin function check call.
	* config/riscv/riscv-protos.h (RVV_VUNDEF): Adapt macro.
	(check_builtin_call): New function.
	* config/riscv/riscv-vector-builtins-bases.cc (class vundefined): New class.
	(class vreinterpret): Ditto.
	(class vlmul_ext): Ditto.
	(class vlmul_trunc): Ditto.
	(class vset): Ditto.
	(class vget): Ditto.
	(BASE): Ditto.
	* config/riscv/riscv-vector-builtins-bases.h: Ditto.
	* config/riscv/riscv-vector-builtins-functions.def (vluxei8): Change name.
	(vluxei16): Ditto.
	(vluxei32): Ditto.
	(vluxei64): Ditto.
	(vloxei8): Ditto.
	(vloxei16): Ditto.
	(vloxei32): Ditto.
	(vloxei64): Ditto.
	(vsuxei8): Ditto.
	(vsuxei16): Ditto.
	(vsuxei32): Ditto.
	(vsuxei64): Ditto.
	(vsoxei8): Ditto.
	(vsoxei16): Ditto.
	(vsoxei32): Ditto.
	(vsoxei64): Ditto.
	(vundefined): Add new intrinsic.
	(vreinterpret): Ditto.
	(vlmul_ext): Ditto.
	(vlmul_trunc): Ditto.
	(vset): Ditto.
	(vget): Ditto.
	* config/riscv/riscv-vector-builtins-shapes.cc (struct return_mask_def): New class.
	(struct narrow_alu_def): Ditto.
	(struct reduc_alu_def): Ditto.
	(struct vundefined_def): Ditto.
	(struct misc_def): Ditto.
	(struct vset_def): Ditto.
	(struct vget_def): Ditto.
	(SHAPE): Ditto.
	* config/riscv/riscv-vector-builtins-shapes.h: Ditto.
	* config/riscv/riscv-vector-builtins-types.def (DEF_RVV_EEW8_INTERPRET_OPS): New def.
	(DEF_RVV_EEW16_INTERPRET_OPS): Ditto.
	(DEF_RVV_EEW32_INTERPRET_OPS): Ditto.
	(DEF_RVV_EEW64_INTERPRET_OPS): Ditto.
	(DEF_RVV_X2_VLMUL_EXT_OPS): Ditto.
	(DEF_RVV_X4_VLMUL_EXT_OPS): Ditto.
	(DEF_RVV_X8_VLMUL_EXT_OPS): Ditto.
	(DEF_RVV_X16_VLMUL_EXT_OPS): Ditto.
	(DEF_RVV_X32_VLMUL_EXT_OPS): Ditto.
	(DEF_RVV_X64_VLMUL_EXT_OPS): Ditto.
	(DEF_RVV_LMUL1_OPS): Ditto.
	(DEF_RVV_LMUL2_OPS): Ditto.
	(DEF_RVV_LMUL4_OPS): Ditto.
	(vint16mf4_t): Ditto.
	(vint16mf2_t): Ditto.
	(vint16m1_t): Ditto.
	(vint16m2_t): Ditto.
	(vint16m4_t): Ditto.
	(vint16m8_t): Ditto.
	(vint32mf2_t): Ditto.
	(vint32m1_t): Ditto.
	(vint32m2_t): Ditto.
	(vint32m4_t): Ditto.
	(vint32m8_t): Ditto.
	(vint64m1_t): Ditto.
	(vint64m2_t): Ditto.
	(vint64m4_t): Ditto.
	(vint64m8_t): Ditto.
	(vuint16mf4_t): Ditto.
	(vuint16mf2_t): Ditto.
	(vuint16m1_t): Ditto.
	(vuint16m2_t): Ditto.
	(vuint16m4_t): Ditto.
	(vuint16m8_t): Ditto.
	(vuint32mf2_t): Ditto.
	(vuint32m1_t): Ditto.
	(vuint32m2_t): Ditto.
	(vuint32m4_t): Ditto.
	(vuint32m8_t): Ditto.
	(vuint64m1_t): Ditto.
	(vuint64m2_t): Ditto.
	(vuint64m4_t): Ditto.
	(vuint64m8_t): Ditto.
	(vint8mf4_t): Ditto.
	(vint8mf2_t): Ditto.
	(vint8m1_t): Ditto.
	(vint8m2_t): Ditto.
	(vint8m4_t): Ditto.
	(vint8m8_t): Ditto.
	(vuint8mf4_t): Ditto.
	(vuint8mf2_t): Ditto.
	(vuint8m1_t): Ditto.
	(vuint8m2_t): Ditto.
	(vuint8m4_t): Ditto.
	(vuint8m8_t): Ditto.
	(vint8mf8_t): Ditto.
	(vuint8mf8_t): Ditto.
	(vfloat32mf2_t): Ditto.
	(vfloat32m1_t): Ditto.
	(vfloat32m2_t): Ditto.
	(vfloat32m4_t): Ditto.
	(vfloat64m1_t): Ditto.
	(vfloat64m2_t): Ditto.
	(vfloat64m4_t): Ditto.
	* config/riscv/riscv-vector-builtins.cc (DEF_RVV_TYPE): Ditto.
	(DEF_RVV_EEW8_INTERPRET_OPS): Ditto.
	(DEF_RVV_EEW16_INTERPRET_OPS): Ditto.
	(DEF_RVV_EEW32_INTERPRET_OPS): Ditto.
	(DEF_RVV_EEW64_INTERPRET_OPS): Ditto.
	(DEF_RVV_X2_VLMUL_EXT_OPS): Ditto.
	(DEF_RVV_X4_VLMUL_EXT_OPS): Ditto.
	(DEF_RVV_X8_VLMUL_EXT_OPS): Ditto.
	(DEF_RVV_X16_VLMUL_EXT_OPS): Ditto.
	(DEF_RVV_X32_VLMUL_EXT_OPS): Ditto.
	(DEF_RVV_X64_VLMUL_EXT_OPS): Ditto.
	(DEF_RVV_LMUL1_OPS): Ditto.
	(DEF_RVV_LMUL2_OPS): Ditto.
	(DEF_RVV_LMUL4_OPS): Ditto.
	(DEF_RVV_TYPE_INDEX): Ditto.
	(required_extensions_p): Adapt for new intrinsic support/
	(get_required_extensions): New function.
	(check_required_extensions): Ditto.
	(unsigned_base_type_p): Remove.
	(rvv_arg_type_info::get_scalar_ptr_type): New function.
	(get_mode_for_bitsize): Remove.
	(rvv_arg_type_info::get_scalar_const_ptr_type): New function.
	(rvv_arg_type_info::get_base_vector_type): Ditto.
	(rvv_arg_type_info::get_function_type_index): Ditto.
	(DEF_RVV_BASE_TYPE): New def.
	(function_builder::apply_predication): New class.
	(function_expander::mask_mode): Ditto.
	(function_checker::function_checker): Ditto.
	(function_checker::report_non_ice): Ditto.
	(function_checker::report_out_of_range): Ditto.
	(function_checker::require_immediate): Ditto.
	(function_checker::require_immediate_range): Ditto.
	(function_checker::check): Ditto.
	(check_builtin_call): Ditto.
	* config/riscv/riscv-vector-builtins.def (DEF_RVV_TYPE): New def.
	(DEF_RVV_BASE_TYPE): Ditto.
	(DEF_RVV_TYPE_INDEX): Ditto.
	(vbool64_t): Ditto.
	(vbool32_t): Ditto.
	(vbool16_t): Ditto.
	(vbool8_t): Ditto.
	(vbool4_t): Ditto.
	(vbool2_t): Ditto.
	(vbool1_t): Ditto.
	(vuint8mf8_t): Ditto.
	(vuint8mf4_t): Ditto.
	(vuint8mf2_t): Ditto.
	(vuint8m1_t): Ditto.
	(vuint8m2_t): Ditto.
	(vint8m4_t): Ditto.
	(vuint8m4_t): Ditto.
	(vint8m8_t): Ditto.
	(vuint8m8_t): Ditto.
	(vint16mf4_t): Ditto.
	(vuint16mf2_t): Ditto.
	(vuint16m1_t): Ditto.
	(vuint16m2_t): Ditto.
	(vuint16m4_t): Ditto.
	(vuint16m8_t): Ditto.
	(vint32mf2_t): Ditto.
	(vuint32m1_t): Ditto.
	(vuint32m2_t): Ditto.
	(vuint32m4_t): Ditto.
	(vuint32m8_t): Ditto.
	(vuint64m1_t): Ditto.
	(vuint64m2_t): Ditto.
	(vuint64m4_t): Ditto.
	(vuint64m8_t): Ditto.
	(vfloat32mf2_t): Ditto.
	(vfloat32m1_t): Ditto.
	(vfloat32m2_t): Ditto.
	(vfloat32m4_t): Ditto.
	(vfloat32m8_t): Ditto.
	(vfloat64m1_t): Ditto.
	(vfloat64m4_t): Ditto.
	(vector): Move it def.
	(scalar): Ditto.
	(mask): Ditto.
	(signed_vector): Ditto.
	(unsigned_vector): Ditto.
	(unsigned_scalar): Ditto.
	(vector_ptr): Ditto.
	(scalar_ptr): Ditto.
	(scalar_const_ptr): Ditto.
	(void): Ditto.
	(size): Ditto.
	(ptrdiff): Ditto.
	(unsigned_long): Ditto.
	(long): Ditto.
	(eew8_index): Ditto.
	(eew16_index): Ditto.
	(eew32_index): Ditto.
	(eew64_index): Ditto.
	(shift_vector): Ditto.
	(double_trunc_vector): Ditto.
	(quad_trunc_vector): Ditto.
	(oct_trunc_vector): Ditto.
	(double_trunc_scalar): Ditto.
	(double_trunc_signed_vector): Ditto.
	(double_trunc_unsigned_vector): Ditto.
	(double_trunc_unsigned_scalar): Ditto.
	(double_trunc_float_vector): Ditto.
	(float_vector): Ditto.
	(lmul1_vector): Ditto.
	(widen_lmul1_vector): Ditto.
	(eew8_interpret): Ditto.
	(eew16_interpret): Ditto.
	(eew32_interpret): Ditto.
	(eew64_interpret): Ditto.
	(vlmul_ext_x2): Ditto.
	(vlmul_ext_x4): Ditto.
	(vlmul_ext_x8): Ditto.
	(vlmul_ext_x16): Ditto.
	(vlmul_ext_x32): Ditto.
	(vlmul_ext_x64): Ditto.
	* config/riscv/riscv-vector-builtins.h (DEF_RVV_BASE_TYPE): New def.
	(struct function_type_info): New function.
	(struct rvv_arg_type_info): Ditto.
	(class function_checker): New class.
	(rvv_arg_type_info::get_scalar_type): New function.
	(rvv_arg_type_info::get_vector_type): Ditto.
	(function_expander::ret_mode): New function.
	(function_checker::arg_mode): Ditto.
	(function_checker::ret_mode): Ditto.
	* config/riscv/t-riscv: Add generator.
	* config/riscv/vector-iterators.md: New iterators.
	* config/riscv/vector.md (vundefined<mode>): New pattern.
	(@vundefined<mode>): Ditto.
	(@vreinterpret<mode>): Ditto.
	(@vlmul_extx2<mode>): Ditto.
	(@vlmul_extx4<mode>): Ditto.
	(@vlmul_extx8<mode>): Ditto.
	(@vlmul_extx16<mode>): Ditto.
	(@vlmul_extx32<mode>): Ditto.
	(@vlmul_extx64<mode>): Ditto.
	(*vlmul_extx2<mode>): Ditto.
	(*vlmul_extx4<mode>): Ditto.
	(*vlmul_extx8<mode>): Ditto.
	(*vlmul_extx16<mode>): Ditto.
	(*vlmul_extx32<mode>): Ditto.
	(*vlmul_extx64<mode>): Ditto.
	* config/riscv/genrvv-type-indexer.cc: New file.

2023-03-05  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-protos.h (enum vlen_enum): New enum.
	(slide1_sew64_helper): New function.
	* config/riscv/riscv-v.cc (compute_vlmax): Ditto.
	(get_unknown_min_value): Ditto.
	(force_vector_length_operand): Ditto.
	(gen_no_side_effects_vsetvl_rtx): Ditto.
	(get_vl_x2_rtx): Ditto.
	(slide1_sew64_helper): Ditto.
	* config/riscv/riscv-vector-builtins-bases.cc (class slideop): New class.
	(class vrgather): Ditto.
	(class vrgatherei16): Ditto.
	(class vcompress): Ditto.
	(BASE): Ditto.
	* config/riscv/riscv-vector-builtins-bases.h: Ditto.
	* config/riscv/riscv-vector-builtins-functions.def (vslideup): Ditto.
	(vslidedown): Ditto.
	(vslide1up): Ditto.
	(vslide1down): Ditto.
	(vfslide1up): Ditto.
	(vfslide1down): Ditto.
	(vrgather): Ditto.
	(vrgatherei16): Ditto.
	(vcompress): Ditto.
	* config/riscv/riscv-vector-builtins-types.def (DEF_RVV_EI16_OPS): New macro.
	(vint8mf8_t): Ditto.
	(vint8mf4_t): Ditto.
	(vint8mf2_t): Ditto.
	(vint8m1_t): Ditto.
	(vint8m2_t): Ditto.
	(vint8m4_t): Ditto.
	(vint16mf4_t): Ditto.
	(vint16mf2_t): Ditto.
	(vint16m1_t): Ditto.
	(vint16m2_t): Ditto.
	(vint16m4_t): Ditto.
	(vint16m8_t): Ditto.
	(vint32mf2_t): Ditto.
	(vint32m1_t): Ditto.
	(vint32m2_t): Ditto.
	(vint32m4_t): Ditto.
	(vint32m8_t): Ditto.
	(vint64m1_t): Ditto.
	(vint64m2_t): Ditto.
	(vint64m4_t): Ditto.
	(vint64m8_t): Ditto.
	(vuint8mf8_t): Ditto.
	(vuint8mf4_t): Ditto.
	(vuint8mf2_t): Ditto.
	(vuint8m1_t): Ditto.
	(vuint8m2_t): Ditto.
	(vuint8m4_t): Ditto.
	(vuint16mf4_t): Ditto.
	(vuint16mf2_t): Ditto.
	(vuint16m1_t): Ditto.
	(vuint16m2_t): Ditto.
	(vuint16m4_t): Ditto.
	(vuint16m8_t): Ditto.
	(vuint32mf2_t): Ditto.
	(vuint32m1_t): Ditto.
	(vuint32m2_t): Ditto.
	(vuint32m4_t): Ditto.
	(vuint32m8_t): Ditto.
	(vuint64m1_t): Ditto.
	(vuint64m2_t): Ditto.
	(vuint64m4_t): Ditto.
	(vuint64m8_t): Ditto.
	(vfloat32mf2_t): Ditto.
	(vfloat32m1_t): Ditto.
	(vfloat32m2_t): Ditto.
	(vfloat32m4_t): Ditto.
	(vfloat32m8_t): Ditto.
	(vfloat64m1_t): Ditto.
	(vfloat64m2_t): Ditto.
	(vfloat64m4_t): Ditto.
	(vfloat64m8_t): Ditto.
	* config/riscv/riscv-vector-builtins.cc (DEF_RVV_EI16_OPS): Ditto.
	* config/riscv/riscv.md: Adjust RVV instruction types.
	* config/riscv/vector-iterators.md (down): New iterator.
	(=vd,vr): New attribute.
	(UNSPEC_VSLIDE1UP): New unspec.
	* config/riscv/vector.md (@pred_slide<ud><mode>): New pattern.
	(*pred_slide<ud><mode>): Ditto.
	(*pred_slide<ud><mode>_extended): Ditto.
	(@pred_gather<mode>): Ditto.
	(@pred_gather<mode>_scalar): Ditto.
	(@pred_gatherei16<mode>): Ditto.
	(@pred_compress<mode>): Ditto.

2023-03-05  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vector-builtins.cc: Remove void_type_node.

2023-03-05  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/constraints.md (Wb1): New constraint.
	* config/riscv/predicates.md
	(vector_least_significant_set_mask_operand): New predicate.
	(vector_broadcast_mask_operand): Ditto.
	* config/riscv/riscv-protos.h (enum vlmul_type): Adjust.
	(gen_scalar_move_mask): New function.
	* config/riscv/riscv-v.cc (gen_scalar_move_mask): Ditto.
	* config/riscv/riscv-vector-builtins-bases.cc (class vmv): New class.
	(class vmv_s): Ditto.
	(BASE): Ditto.
	* config/riscv/riscv-vector-builtins-bases.h: Ditto.
	* config/riscv/riscv-vector-builtins-functions.def (vmv_x): Ditto.
	(vmv_s): Ditto.
	(vfmv_f): Ditto.
	(vfmv_s): Ditto.
	* config/riscv/riscv-vector-builtins-shapes.cc (struct scalar_move_def): Ditto.
	(SHAPE): Ditto.
	* config/riscv/riscv-vector-builtins-shapes.h: Ditto.
	* config/riscv/riscv-vector-builtins.cc (function_expander::mask_mode): Ditto.
	(function_expander::use_exact_insn): New function.
	(function_expander::use_contiguous_load_insn): New function.
	(function_expander::use_contiguous_store_insn): New function.
	(function_expander::use_ternop_insn): New function.
	(function_expander::use_widen_ternop_insn): New function.
	(function_expander::use_scalar_move_insn): New function.
	* config/riscv/riscv-vector-builtins.def (s): New operand suffix.
	* config/riscv/riscv-vector-builtins.h
	(function_expander::add_scalar_move_mask_operand): New class.
	* config/riscv/riscv-vsetvl.cc (ignore_vlmul_insn_p): New function.
	(scalar_move_insn_p): Ditto.
	(has_vsetvl_killed_avl_p): Ditto.
	(anticipatable_occurrence_p): Ditto.
	(insert_vsetvl): Ditto.
	(get_vl_vtype_info): Ditto.
	(calculate_sew): Ditto.
	(calculate_vlmul): Ditto.
	(incompatible_avl_p): Ditto.
	(different_sew_p): Ditto.
	(different_lmul_p): Ditto.
	(different_ratio_p): Ditto.
	(different_tail_policy_p): Ditto.
	(different_mask_policy_p): Ditto.
	(possible_zero_avl_p): Ditto.
	(first_ratio_invalid_for_second_sew_p): Ditto.
	(first_ratio_invalid_for_second_lmul_p): Ditto.
	(second_ratio_invalid_for_first_sew_p): Ditto.
	(second_ratio_invalid_for_first_lmul_p): Ditto.
	(second_sew_less_than_first_sew_p): Ditto.
	(first_sew_less_than_second_sew_p): Ditto.
	(compare_lmul): Ditto.
	(second_lmul_less_than_first_lmul_p): Ditto.
	(first_lmul_less_than_second_lmul_p): Ditto.
	(first_ratio_less_than_second_ratio_p): Ditto.
	(second_ratio_less_than_first_ratio_p): Ditto.
	(DEF_INCOMPATIBLE_COND): Ditto.
	(greatest_sew): Ditto.
	(first_sew): Ditto.
	(second_sew): Ditto.
	(first_vlmul): Ditto.
	(second_vlmul): Ditto.
	(first_ratio): Ditto.
	(second_ratio): Ditto.
	(vlmul_for_first_sew_second_ratio): Ditto.
	(ratio_for_second_sew_first_vlmul): Ditto.
	(DEF_SEW_LMUL_FUSE_RULE): Ditto.
	(always_unavailable): Ditto.
	(avl_unavailable_p): Ditto.
	(sew_unavailable_p): Ditto.
	(lmul_unavailable_p): Ditto.
	(ge_sew_unavailable_p): Ditto.
	(ge_sew_lmul_unavailable_p): Ditto.
	(ge_sew_ratio_unavailable_p): Ditto.
	(DEF_UNAVAILABLE_COND): Ditto.
	(same_sew_lmul_demand_p): Ditto.
	(propagate_avl_across_demands_p): Ditto.
	(reg_available_p): Ditto.
	(avl_info::has_non_zero_avl): Ditto.
	(vl_vtype_info::has_non_zero_avl): Ditto.
	(vector_insn_info::operator>=): Refactor.
	(vector_insn_info::parse_insn): Adjust for scalar move.
	(vector_insn_info::demand_vl_vtype): Remove.
	(vector_insn_info::compatible_p): New function.
	(vector_insn_info::compatible_avl_p): Ditto.
	(vector_insn_info::compatible_vtype_p): Ditto.
	(vector_insn_info::available_p): Ditto.
	(vector_insn_info::merge): Ditto.
	(vector_insn_info::fuse_avl): Ditto.
	(vector_insn_info::fuse_sew_lmul): Ditto.
	(vector_insn_info::fuse_tail_policy): Ditto.
	(vector_insn_info::fuse_mask_policy): Ditto.
	(vector_insn_info::dump): Ditto.
	(vector_infos_manager::release): Ditto.
	(pass_vsetvl::compute_local_backward_infos): Adjust for scalar move support.
	(pass_vsetvl::get_backward_fusion_type): Adjust for scalar move support.
	(pass_vsetvl::hard_empty_block_p): Ditto.
	(pass_vsetvl::backward_demand_fusion): Ditto.
	(pass_vsetvl::forward_demand_fusion): Ditto.
	(pass_vsetvl::refine_vsetvls): Ditto.
	(pass_vsetvl::cleanup_vsetvls): Ditto.
	(pass_vsetvl::commit_vsetvls): Ditto.
	(pass_vsetvl::propagate_avl): Ditto.
	* config/riscv/riscv-vsetvl.h (enum demand_status): New class.
	(struct demands_pair): Ditto.
	(struct demands_cond): Ditto.
	(struct demands_fuse_rule): Ditto.
	* config/riscv/vector-iterators.md: New iterator.
	* config/riscv/vector.md (@pred_broadcast<mode>): New pattern.
	(*pred_broadcast<mode>): Ditto.
	(*pred_broadcast<mode>_extended_scalar): Ditto.
	(@pred_extract_first<mode>): Ditto.
	(*pred_extract_first<mode>): Ditto.
	(@pred_extract_first_trunc<mode>): Ditto.
	* config/riscv/riscv-vsetvl.def: New file.

2023-03-05  Lin Sinan  <sinan.lin@linux.alibaba.com>

	* config/riscv/bitmanip.md: allow 0 constant in max/min
	pattern.

2023-03-05  Lin Sinan  <sinan.lin@linux.alibaba.com>

	* config/riscv/bitmanip.md: Fix wrong index in the check.

2023-03-04  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/109006
	* vec.cc (test_auto_alias): Adjust comment for removal of
	m_vecdata.
	* read-rtl-function.cc (function_reader::parse_block): Likewise.
	* gdbhooks.py: Likewise.

2023-03-04  Jakub Jelinek  <jakub@redhat.com>

	PR testsuite/108973
	* selftest-diagnostic.cc
	(test_diagnostic_context::test_diagnostic_context): Set
	caret_max_width to 80.

2023-03-03  Alexandre Oliva  <oliva@adacore.com>

	* gimple-ssa-warn-access.cc
	(pass_waccess::check_dangling_stores): Skip non-stores.

2023-03-03  Alexandre Oliva  <oliva@adacore.com>

	* config/arm/vfp.md (*thumb2_movsi_vfp): Drop blank after tab
	after vmsr and vmrs, and lower the case of P0.

2023-03-03  Jonathan Wakely  <jwakely@redhat.com>

	PR middle-end/109006
	* gdbhooks.py (VecPrinter): Handle vec<T> as well as vec<T>*.

2023-03-03  Jonathan Wakely  <jwakely@redhat.com>

	PR middle-end/109006
	* gdbhooks.py (VecPrinter): Adjust for new vec layout.

2023-03-03  Jakub Jelinek  <jakub@redhat.com>

	PR c/108986
	* gimple-ssa-warn-access.cc (pass_waccess::maybe_check_access_sizes):
	Return immediately if OPT_Wnonnull or OPT_Wstringop_overflow_ is
	suppressed on stmt.  For [static %E] warning, print access_nelts
	rather than access_size.  Fix up comment wording.

2023-03-03  Robin Dapp  <rdapp@linux.ibm.com>

	* config/s390/driver-native.cc (s390_host_detect_local_cpu): Use
	arch14 instead of z16.

2023-03-03  Anthony Green  <green@moxielogic.com>

	* config/moxie/moxie.cc (TARGET_LRA_P): Remove.

2023-03-03  Anthony Green  <green@moxielogic.com>

	* config/moxie/constraints.md (A, B, W): Change
	define_constraint to define_memory_constraint.

2023-03-03  Xi Ruoyao  <xry111@xry111.site>

	* toplev.cc (process_options): Fix the spelling of
	"-fstack-clash-protection".

2023-03-03  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/109002
	* tree-ssa-pre.cc (compute_partial_antic_aux): Properly
	PHI-translate ANTIC_IN.

2023-03-03  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/108988
	* gimple-fold.cc (gimple_fold_builtin_fputs): Fold len to
	size_type_node before passing it as argument to fwrite.  Formatting
	fixes.

2023-03-03  Richard Biener  <rguenther@suse.de>

	PR target/108738
	* config/i386/i386.opt (--param x86-stv-max-visits): New param.
	* doc/invoke.texi (--param x86-stv-max-visits): Document it.
	* config/i386/i386-features.h (scalar_chain::max_visits): New.
	(scalar_chain::build): Add bitmap parameter, return boolean.
	(scalar_chain::add_insn): Likewise.
	(scalar_chain::analyze_register_chain): Likewise.
	* config/i386/i386-features.cc (scalar_chain::scalar_chain):
	Initialize max_visits.
	(scalar_chain::analyze_register_chain): When we exhaust
	max_visits, abort.  Also abort when running into any
	disallowed insn.
	(scalar_chain::add_insn): Propagate abort.
	(scalar_chain::build): Likewise.  When aborting amend
	the set of disallowed insn with the insns set.
	(convert_scalars_to_vector): Adjust.  Do not convert aborted
	chains.

2023-03-03  Richard Biener  <rguenther@suse.de>

	PR debug/108772
	* dwarf2out.cc (dwarf2out_late_global_decl): Do not
	generate a DIE for a function scope static.

2023-03-03  Alexandre Oliva  <oliva@adacore.com>

	* config/vx-common.h (WINT_TYPE): Alias to "wchar_t".

2023-03-02  Jakub Jelinek  <jakub@redhat.com>

	PR target/108883
	* target.h (emit_support_tinfos_callback): New typedef.
	* targhooks.h (default_emit_support_tinfos): Declare.
	* targhooks.cc (default_emit_support_tinfos): New function.
	* target.def (emit_support_tinfos): New target hook.
	* doc/tm.texi.in (emit_support_tinfos): Document it.
	* doc/tm.texi: Regenerated.
	* config/i386/i386.cc (ix86_emit_support_tinfos): New function.
	(TARGET_EMIT_SUPPORT_TINFOS): Redefine.

2023-03-02  Vladimir N. Makarov  <vmakarov@redhat.com>

	* ira-costs.cc: Include print-rtl.h.
	(record_reg_classes, scan_one_insn): Add code to print debug info.
	(record_operand_costs): Find and use smaller cost for hard reg
	move.

2023-03-02  Kwok Cheung Yeung  <kcy@codesourcery.com>
	    Paul-Antoine Arras  <pa@codesourcery.com>

	* builtins.cc (mathfn_built_in_explicit): New.
	* config/gcn/gcn.cc: Include case-cfn-macros.h.
	(mathfn_built_in_explicit): Add prototype.
	(gcn_vectorize_builtin_vectorized_function): New.
	(gcn_libc_has_function): New.
	(TARGET_LIBC_HAS_FUNCTION): Define.
	(TARGET_VECTORIZE_BUILTIN_VECTORIZED_FUNCTION): Define.

2023-03-02  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/108979
	* tree-vect-stmts.cc (vectorizable_operation): Don't mask
	operations on invariants.

2023-03-02  Robin Dapp  <rdapp@linux.ibm.com>

	* config/s390/predicates.md (vll_bias_operand): Add -1 bias.
	* config/s390/s390.cc (s390_option_override_internal): Make
	partial vector usage the default from z13 on.
	* config/s390/vector.md (len_load_v16qi): Add.
	(len_store_v16qi): Add.

2023-03-02  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* simplify-rtx.cc (simplify_context::simplify_subreg): Use byte instead
	of constant 0 offset.

2023-03-02  Robert Suchanek  <robert.suchanek@imgtec.com>

	* config/mips/mips.cc (mips_set_text_contents_type): Use HOST_WIDE_INT
	instead of long.
	* config/mips/mips-protos.h (mips_set_text_contents_type): Likewise.

2023-03-02  Junxian Zhu  <zhujunxian@oss.cipunited.com>

	* config.gcc: add -with-{no-}msa build option.
	* config/mips/mips.h: Likewise.
	* doc/install.texi: Likewise.

2023-03-02  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/108603
	* explow.cc (convert_memory_address_addr_space_1): Only wrap
	the result of a recursive call in a CONST if no instructions
	were emitted.

2023-03-02  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/108430
	* tree-vect-stmts.cc (vectorizable_condition): Fix handling
	of inverted condition.

2023-03-02  Jakub Jelinek  <jakub@redhat.com>

	PR c++/108934
	* fold-const.cc (native_interpret_expr) <case REAL_CST>: Before memcmp
	comparison copy the bytes from ptr to a temporary buffer and clearing
	padding bits in there.

2023-03-01  Tobias Burnus  <tobias@codesourcery.com>

	PR middle-end/108545
	* gimplify.cc (struct tree_operand_hash_no_se): New.
	(omp_index_mapping_groups_1, omp_index_mapping_groups,
	omp_reindex_mapping_groups, omp_mapped_by_containing_struct,
	omp_tsort_mapping_groups_1, omp_tsort_mapping_groups,
	oacc_resolve_clause_dependencies, omp_build_struct_sibling_lists,
	gimplify_scan_omp_clauses): Use tree_operand_hash_no_se instead
	of tree_operand_hash.

2023-03-01  LIU Hao  <lh_mouse@126.com>

	PR pch/14940
	* config/i386/host-mingw32.cc (mingw32_gt_pch_get_address):
	Remove the size limit `pch_VA_max_size`

2023-03-01  Tobias Burnus  <tobias@codesourcery.com>

	PR middle-end/108546
	* omp-low.cc (lower_omp_target): Remove optional handling
	on the receiver side, i.e. inside target (data), for
	use_device_ptr.

2023-03-01  Jakub Jelinek  <jakub@redhat.com>

	PR debug/108967
	* cfgexpand.cc (expand_debug_expr): Handle WIDEN_{PLUS,MINUS}_EXPR
	and VEC_WIDEN_{PLUS,MINUS}_{HI,LO}_EXPR.

2023-03-01  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/108970
	* tree-vect-loop-manip.cc (slpeel_can_duplicate_loop_p):
	Check we can copy the BBs.
	(slpeel_tree_duplicate_loop_to_edge_cfg): Avoid redundant
	check.
	(vect_do_peeling): Streamline error handling.

2023-03-01  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/108950
	* tree-vect-patterns.cc (vect_recog_widen_sum_pattern):
	Check oprnd0 is defined in the loop.
	* tree-vect-loop.cc (vectorizable_reduction): Record all
	operands vector types, compute that of invariants and
	properly update their SLP nodes.

2023-03-01  Kewen Lin  <linkw@linux.ibm.com>

	PR target/108240
	* config/rs6000/rs6000.cc (rs6000_option_override_internal): Allow
	implicit powerpc64 setting to be unset if 64 bit is enabled implicitly.

2023-02-28  Qing Zhao  <qing.zhao@oracle.com>

	PR middle-end/107411
	PR middle-end/107411
	* gimplify.cc (gimple_add_init_for_auto_var): Use sprintf to replace
	xasprintf.
	* tree-ssa-uninit.cc (warn_uninit): Handle the case when the
	LHS varaible of a .DEFERRED_INIT call doesn't have a DECL_NAME.

2023-02-28  Jakub Jelinek  <jakub@redhat.com>

	PR sanitizer/108894
	* ubsan.cc (ubsan_expand_bounds_ifn): Emit index >= bound
	comparison rather than index > bound.
	* gimple-fold.cc (gimple_fold_call): Use tree_int_cst_lt
	rather than tree_int_cst_le for IFN_UBSAN_BOUND comparison.
	* doc/invoke.texi (-fsanitize=bounds): Document that whether
	flexible array member-like arrays are instrumented or not depends
	on -fstrict-flex-arrays* options of strict_flex_array attributes.
	(-fsanitize=bounds-strict): Document that flexible array members
	are not instrumented.

2023-02-27  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/108922
	Revert:
	* config/i386/i386.md (fmodxf3): Enable for flag_finite_math_only only.
	(fmod<mode>3): Ditto.
	(fpremxf4_i387): Ditto.
	(reminderxf3): Ditto.
	(reminder<mode>3): Ditto.
	(fprem1xf4_i387): Ditto.

2023-02-27  Roger Sayle  <roger@nextmovesoftware.com>

	* simplify-rtx.cc (simplify_unary_operation_1) <case FFS>: Avoid
	generating FFS with mismatched operand and result modes, by using
	an explicit SIGN_EXTEND/ZERO_EXTEND.
	<case POPCOUNT>: Likewise, for POPCOUNT of ZERO_EXTEND.
	<case PARITY>: Likewise, for PARITY of {ZERO,SIGN}_EXTEND.

2023-02-27  Patrick Palka  <ppalka@redhat.com>

	* hash-table.h (gt_pch_nx(hash_table<D>)): Remove static.
	* lra-int.h (lra_change_class): Likewise.
	* recog.h (which_op_alt): Likewise.
	* sel-sched-ir.h (sel_bb_empty_or_nop_p): Declare inline
	instead of static.

2023-02-27  Takayuki 'January June' Suwa  <jjsuwa_sys3175@yahoo.co.jp>

	* config/xtensa/xtensa-protos.h (xtensa_match_CLAMPS_imms_p):
	New prototype.
	* config/xtensa/xtensa.cc (xtensa_match_CLAMPS_imms_p):
	New function.
	* config/xtensa/xtensa.h (TARGET_CLAMPS): New macro definition.
	* config/xtensa/xtensa.md (*xtensa_clamps): New insn pattern.

2023-02-27  Max Filippov  <jcmvbkbc@gmail.com>

	* config/xtensa/xtensa-dynconfig.cc (xtensa_get_config_v2)
	(xtensa_get_config_v3): New functions.

2023-02-27  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64-simd.md (aarch64_abs<mode>): Fix typo in comment.

2023-02-27  Lulu Cheng  <chenglulu@loongson.cn>

	* config/host-linux.cc (TRY_EMPTY_VM_SPACE): Modify the value of
	the macro to 0x1000000000.

2023-02-25  Gaius Mulley  <gaiusmod2@gmail.com>

	PR modula2/108261
	* doc/gm2.texi (-fm2-pathname): New option documented.
	(-fm2-pathnameI): New option documented.
	(-fm2-prefix=): New option documented.
	(-fruntime-modules=): Update default module list.

2023-02-25  Max Filippov  <jcmvbkbc@gmail.com>

	PR target/108919
	* config/xtensa/xtensa-protos.h
	(xtensa_prepare_expand_call): Rename to xtensa_expand_call.
	* config/xtensa/xtensa.cc (xtensa_prepare_expand_call): Rename
	to xtensa_expand_call.
	(xtensa_expand_call): Emit the call and add a clobber expression
	for the static chain to it in case of windowed ABI.
	* config/xtensa/xtensa.md (call, call_value, sibcall)
	(sibcall_value): Call xtensa_expand_call and complete expansion
	right after that call.

2023-02-24  Richard Biener  <rguenther@suse.de>

	* vec.h (vec<T, A, vl_embed>::m_vecdata): Remove.
	(vec<T, A, vl_embed>::m_vecpfx): Align as T to avoid
	changing alignment of vec<T, A, vl_embed> and simplifying
	address.
	(vec<T, A, vl_embed>::address): Compute as this + 1.
	(vec<T, A, vl_embed>::embedded_size): Use sizeof the
	vector instead of the offset of the m_vecdata member.
	(auto_vec<T, N>::m_data): Turn storage into
	uninitialized unsigned char.
	(auto_vec<T, N>::auto_vec): Allow allocation of one
	stack member.  Initialize m_vec in a special way to
	avoid later stringop overflow diagnostics.
	* vec.cc (test_auto_alias): New.
	(vec_cc_tests): Call it.

2023-02-24  Richard Biener  <rguenther@suse.de>

	* vec.h (vec<T, A, vl_embed>::lower_bound): Adjust to
	take a const reference to the object, use address to
	access data.
	(vec<T, A, vl_embed>::contains): Use address to access data.
	(vec<T, A, vl_embed>::operator[]): Use address instead of
	m_vecdata to access data.
	(vec<T, A, vl_embed>::iterate): Likewise.
	(vec<T, A, vl_embed>::copy): Likewise.
	(vec<T, A, vl_embed>::quick_push): Likewise.
	(vec<T, A, vl_embed>::pop): Likewise.
	(vec<T, A, vl_embed>::quick_insert): Likewise.
	(vec<T, A, vl_embed>::ordered_remove): Likewise.
	(vec<T, A, vl_embed>::unordered_remove): Likewise.
	(vec<T, A, vl_embed>::block_remove): Likewise.
	(vec<T, A, vl_heap>::address): Likewise.

2023-02-24  Martin Liska  <mliska@suse.cz>

	PR sanitizer/108834
	* asan.cc (asan_add_global): Use proper TU name for normal
	global variables (and aux_base_name for the artificial one).

2023-02-24  Jakub Jelinek  <jakub@redhat.com>

	* config/i386/i386-builtin.def: Update description of BDESC
	and BDESC_FIRST in file comment to include mask2.

2023-02-24  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64-cores.def (FLAGS): Update comment.

2023-02-24  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/108854
	* cgraphclones.cc (duplicate_thunk_for_node): If no parameter
	changes are needed, copy at least DECL_ARGUMENTS PARM_DECL
	nodes and adjust their DECL_CONTEXT.

2023-02-24  Jakub Jelinek  <jakub@redhat.com>

	PR target/108881
	* config/i386/i386-builtin.def (__builtin_ia32_cvtne2ps2bf16_v16bf,
	__builtin_ia32_cvtne2ps2bf16_v16bf_mask,
	__builtin_ia32_cvtne2ps2bf16_v16bf_maskz,
	__builtin_ia32_cvtne2ps2bf16_v8bf,
	__builtin_ia32_cvtne2ps2bf16_v8bf_mask,
	__builtin_ia32_cvtne2ps2bf16_v8bf_maskz,
	__builtin_ia32_cvtneps2bf16_v8sf_mask,
	__builtin_ia32_cvtneps2bf16_v8sf_maskz,
	__builtin_ia32_cvtneps2bf16_v4sf_mask,
	__builtin_ia32_cvtneps2bf16_v4sf_maskz,
	__builtin_ia32_dpbf16ps_v8sf, __builtin_ia32_dpbf16ps_v8sf_mask,
	__builtin_ia32_dpbf16ps_v8sf_maskz, __builtin_ia32_dpbf16ps_v4sf,
	__builtin_ia32_dpbf16ps_v4sf_mask,
	__builtin_ia32_dpbf16ps_v4sf_maskz): Require also
	OPTION_MASK_ISA_AVX512VL.

2023-02-24  Sebastian Huber  <sebastian.huber@embedded-brains.de>

	* config/riscv/t-rtems: Keep only -mcmodel=medany 64-bit multilibs.
	Add non-compact 32-bit multilibs.

2023-02-24  Junxian Zhu  <zhujunxian@oss.cipunited.com>

	* config/mips/mips.md (*clo<mode>2): New pattern.

2023-02-24  Prachi Godbole  <prachi.godbole@imgtec.com>

	* config/mips/mips.h (machine_function): New variable
	use_hazard_barrier_return_p.
	* config/mips/mips.md (UNSPEC_JRHB): New unspec.
	(mips_hb_return_internal): New insn pattern.
	* config/mips/mips.cc (mips_attribute_table): Add attribute
	use_hazard_barrier_return.
	(mips_use_hazard_barrier_return_p): New static function.
	(mips_function_attr_inlinable_p): Likewise.
	(mips_compute_frame_info): Set use_hazard_barrier_return_p.
	Emit error for unsupported architecture choice.
	(mips_function_ok_for_sibcall, mips_can_use_return_insn):
	Return false for use_hazard_barrier_return.
	(mips_expand_epilogue): Emit hazard barrier return.
	* doc/extend.texi: Document use_hazard_barrier_return.

2023-02-23  Max Filippov  <jcmvbkbc@gmail.com>

	* config/xtensa/xtensa-dynconfig.cc (config.h, system.h)
	(coretypes.h, diagnostic.h, intl.h): Use "..." instead of <...>
	for the gcc-internal headers.

2023-02-23  Max Filippov  <jcmvbkbc@gmail.com>

	* config/xtensa/t-xtensa (xtensa-dynconfig.o): Use $(COMPILE)
	and $(POSTCOMPILE) instead of manual dependency listing.
	* config/xtensa/xtensa-dynconfig.c: Rename to ...
	* config/xtensa/xtensa-dynconfig.cc: ... this.

2023-02-23  Arsen Arsenović  <arsen@aarsen.me>

	* doc/cfg.texi: Reorder index entries around @items.
	* doc/cpp.texi: Ditto.
	* doc/cppenv.texi: Ditto.
	* doc/cppopts.texi: Ditto.
	* doc/generic.texi: Ditto.
	* doc/install.texi: Ditto.
	* doc/extend.texi: Ditto.
	* doc/invoke.texi: Ditto.
	* doc/md.texi: Ditto.
	* doc/rtl.texi: Ditto.
	* doc/tm.texi.in: Ditto.
	* doc/trouble.texi: Ditto.
	* doc/tm.texi: Regenerate.

2023-02-23  Takayuki 'January June' Suwa  <jjsuwa_sys3175@yahoo.co.jp>

	* config/xtensa/xtensa.md: New peephole2 pattern that eliminates
	the occurrence of general-purpose register used only once and for
	transferring intermediate value.

2023-02-23  Takayuki 'January June' Suwa  <jjsuwa_sys3175@yahoo.co.jp>

	* config/xtensa/xtensa.cc (machine_function): Add new member
	'eliminated_callee_saved_bmp'.
	(xtensa_can_eliminate_callee_saved_reg_p): New function to
	determine whether the register can be eliminated or not.
	(xtensa_expand_prologue): Add invoking the above function and
	elimination the use of callee-saved register by using its stack
	slot through the stack pointer (or the frame pointer if needed)
	directly.
	(xtensa_expand_prologue): Modify to not emit register restoration
	insn from its stack slot if the register is already eliminated.

2023-02-23  Jakub Jelinek  <jakub@redhat.com>

	PR translation/108890
	* config/xtensa/xtensa-dynconfig.c (xtensa_load_config): Drop _()s
	around fatal_error format strings.

2023-02-23  Richard Biener  <rguenther@suse.de>

	* tree-ssa-structalias.cc (handle_lhs_call): Do not
	re-create rhsc, only truncate it.

2023-02-23  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/106258
	* ipa-prop.cc (try_make_edge_direct_virtual_call): Handle
	BUILT_IN_UNREACHABLE_TRAP like BUILT_IN_UNREACHABLE.

2023-02-23  Richard Biener  <rguenther@suse.de>

	* tree-if-conv.cc (tree_if_conversion): Properly manage
	memory of refs and the contained data references.

2023-02-23  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/108888
	* tree-if-conv.cc (if_convertible_stmt_p): Set PLF_2 on
	calls to predicate.
	(predicate_statements): Only predicate calls with PLF_2.

2023-02-23  Takayuki 'January June' Suwa  <jjsuwa_sys3175@yahoo.co.jp>

	* config/xtensa/xtensa.md
	(zero_cost_loop_start, zero_cost_loop_end, loop_end):
	Add missing "SI:" to PLUS RTXes.

2023-02-23  Max Filippov  <jcmvbkbc@gmail.com>

	PR target/108876
	* config/xtensa/xtensa.cc (xtensa_expand_epilogue):
	Emit (use (reg:SI A0_REG)) at the end in the sibling call
	(i.e. the same place as (return) in the normal call).

2023-02-23  Max Filippov  <jcmvbkbc@gmail.com>

	Revert:
	2023-02-21  Max Filippov  <jcmvbkbc@gmail.com>

	PR target/108876
	* config/xtensa/xtensa.cc (xtensa_expand_epilogue): Drop emit_use
	for A0_REG.
	* config/xtensa/xtensa.md (sibcall, sibcall_internal)
	(sibcall_value, sibcall_value_internal): Add 'use' expression
	for A0_REG.

2023-02-23  Arsen Arsenović  <arsen@aarsen.me>

	* doc/cppdiropts.texi: Reorder @opindex commands to precede
	@items they relate to.
	* doc/cppopts.texi: Ditto.
	* doc/cppwarnopts.texi: Ditto.
	* doc/invoke.texi: Ditto.
	* doc/lto.texi: Ditto.

2023-02-22  Andrew Stubbs  <ams@codesourcery.com>

	* internal-fn.cc (expand_MASK_CALL): New.
	* internal-fn.def (MASK_CALL): New.
	* internal-fn.h (expand_MASK_CALL): New prototype.
	* omp-simd-clone.cc (simd_clone_adjust_argument_types): Set vector_type
	for mask arguments also.
	* tree-if-conv.cc: Include cgraph.h.
	(if_convertible_stmt_p): Do if conversions for calls to SIMD calls.
	(predicate_statements): Convert functions to IFN_MASK_CALL.
	* tree-vect-loop.cc (vect_get_datarefs_in_loop): Recognise
	IFN_MASK_CALL as a SIMD function call.
	* tree-vect-stmts.cc (vectorizable_simd_clone_call): Handle
	IFN_MASK_CALL as an inbranch SIMD function call.
	Generate the mask vector arguments.

2023-02-22  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vector-builtins-bases.cc (class reducop): New class.
	(class widen_reducop): Ditto.
	(class freducop): Ditto.
	(class widen_freducop): Ditto.
	(BASE): Ditto.
	* config/riscv/riscv-vector-builtins-bases.h: Ditto.
	* config/riscv/riscv-vector-builtins-functions.def (vredsum): Add reduction support.
	(vredmaxu): Ditto.
	(vredmax): Ditto.
	(vredminu): Ditto.
	(vredmin): Ditto.
	(vredand): Ditto.
	(vredor): Ditto.
	(vredxor): Ditto.
	(vwredsum): Ditto.
	(vwredsumu): Ditto.
	(vfredusum): Ditto.
	(vfredosum): Ditto.
	(vfredmax): Ditto.
	(vfredmin): Ditto.
	(vfwredosum): Ditto.
	(vfwredusum): Ditto.
	* config/riscv/riscv-vector-builtins-shapes.cc (struct reduc_alu_def): Ditto.
	(SHAPE): Ditto.
	* config/riscv/riscv-vector-builtins-shapes.h: Ditto.
	* config/riscv/riscv-vector-builtins-types.def (DEF_RVV_WI_OPS): New macro.
	(DEF_RVV_WU_OPS): Ditto.
	(DEF_RVV_WF_OPS): Ditto.
	(vint8mf8_t): Ditto.
	(vint8mf4_t): Ditto.
	(vint8mf2_t): Ditto.
	(vint8m1_t): Ditto.
	(vint8m2_t): Ditto.
	(vint8m4_t): Ditto.
	(vint8m8_t): Ditto.
	(vint16mf4_t): Ditto.
	(vint16mf2_t): Ditto.
	(vint16m1_t): Ditto.
	(vint16m2_t): Ditto.
	(vint16m4_t): Ditto.
	(vint16m8_t): Ditto.
	(vint32mf2_t): Ditto.
	(vint32m1_t): Ditto.
	(vint32m2_t): Ditto.
	(vint32m4_t): Ditto.
	(vint32m8_t): Ditto.
	(vuint8mf8_t): Ditto.
	(vuint8mf4_t): Ditto.
	(vuint8mf2_t): Ditto.
	(vuint8m1_t): Ditto.
	(vuint8m2_t): Ditto.
	(vuint8m4_t): Ditto.
	(vuint8m8_t): Ditto.
	(vuint16mf4_t): Ditto.
	(vuint16mf2_t): Ditto.
	(vuint16m1_t): Ditto.
	(vuint16m2_t): Ditto.
	(vuint16m4_t): Ditto.
	(vuint16m8_t): Ditto.
	(vuint32mf2_t): Ditto.
	(vuint32m1_t): Ditto.
	(vuint32m2_t): Ditto.
	(vuint32m4_t): Ditto.
	(vuint32m8_t): Ditto.
	(vfloat32mf2_t): Ditto.
	(vfloat32m1_t): Ditto.
	(vfloat32m2_t): Ditto.
	(vfloat32m4_t): Ditto.
	(vfloat32m8_t): Ditto.
	* config/riscv/riscv-vector-builtins.cc (DEF_RVV_WI_OPS): Ditto.
	(DEF_RVV_WU_OPS): Ditto.
	(DEF_RVV_WF_OPS): Ditto.
	(required_extensions_p): Add reduction support.
	(rvv_arg_type_info::get_base_vector_type): Ditto.
	(rvv_arg_type_info::get_tree_type): Ditto.
	* config/riscv/riscv-vector-builtins.h (enum rvv_base_type): Ditto.
	* config/riscv/riscv.md: Ditto.
	* config/riscv/vector-iterators.md (minu): Ditto.
	* config/riscv/vector.md (@pred_reduc_<reduc><mode><vlmul1>): New patern.
	(@pred_reduc_<reduc><mode><vlmul1_zve32>): Ditto.
	(@pred_widen_reduc_plus<v_su><mode><vwlmul1>): Ditto.
	(@pred_widen_reduc_plus<v_su><mode><vwlmul1_zve32>):Ditto.
	(@pred_reduc_plus<order><mode><vlmul1>): Ditto.
	(@pred_reduc_plus<order><mode><vlmul1_zve32>): Ditto.
	(@pred_widen_reduc_plus<order><mode><vwlmul1>): Ditto.

2023-02-22  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/iterators.md: New iterator.
	* config/riscv/riscv-vector-builtins-bases.cc (class widen_binop): New class.
	(enum ternop_type): New enum.
	(class vmacc): New class.
	(class imac): Ditto.
	(class vnmsac): Ditto.
	(enum widen_ternop_type): New enum.
	(class vmadd): Ditto.
	(class vnmsub): Ditto.
	(class iwmac): Ditto.
	(class vwmacc): Ditto.
	(class vwmaccu): Ditto.
	(class vwmaccsu): Ditto.
	(class vwmaccus): Ditto.
	(class reverse_binop): Ditto.
	(class vfmacc): Ditto.
	(class vfnmsac): Ditto.
	(class vfmadd): Ditto.
	(class vfnmsub): Ditto.
	(class vfnmacc): Ditto.
	(class vfmsac): Ditto.
	(class vfnmadd): Ditto.
	(class vfmsub): Ditto.
	(class vfwmacc): Ditto.
	(class vfwnmacc): Ditto.
	(class vfwmsac): Ditto.
	(class vfwnmsac): Ditto.
	(class float_misc): Ditto.
	(class fcmp): Ditto.
	(class vfclass): Ditto.
	(class vfcvt_x): Ditto.
	(class vfcvt_rtz_x): Ditto.
	(class vfcvt_f): Ditto.
	(class vfwcvt_x): Ditto.
	(class vfwcvt_rtz_x): Ditto.
	(class vfwcvt_f): Ditto.
	(class vfncvt_x): Ditto.
	(class vfncvt_rtz_x): Ditto.
	(class vfncvt_f): Ditto.
	(class vfncvt_rod_f): Ditto.
	(BASE): Ditto.
	* config/riscv/riscv-vector-builtins-bases.h:
	* config/riscv/riscv-vector-builtins-functions.def (vzext): Ditto.
	(vsext): Ditto.
	(vfadd): Ditto.
	(vfsub): Ditto.
	(vfrsub): Ditto.
	(vfwadd): Ditto.
	(vfwsub): Ditto.
	(vfmul): Ditto.
	(vfdiv): Ditto.
	(vfrdiv): Ditto.
	(vfwmul): Ditto.
	(vfmacc): Ditto.
	(vfnmsac): Ditto.
	(vfmadd): Ditto.
	(vfnmsub): Ditto.
	(vfnmacc): Ditto.
	(vfmsac): Ditto.
	(vfnmadd): Ditto.
	(vfmsub): Ditto.
	(vfwmacc): Ditto.
	(vfwnmacc): Ditto.
	(vfwmsac): Ditto.
	(vfwnmsac): Ditto.
	(vfsqrt): Ditto.
	(vfrsqrt7): Ditto.
	(vfrec7): Ditto.
	(vfmin): Ditto.
	(vfmax): Ditto.
	(vfsgnj): Ditto.
	(vfsgnjn): Ditto.
	(vfsgnjx): Ditto.
	(vfneg): Ditto.
	(vfabs): Ditto.
	(vmfeq): Ditto.
	(vmfne): Ditto.
	(vmflt): Ditto.
	(vmfle): Ditto.
	(vmfgt): Ditto.
	(vmfge): Ditto.
	(vfclass): Ditto.
	(vfmerge): Ditto.
	(vfmv_v): Ditto.
	(vfcvt_x): Ditto.
	(vfcvt_xu): Ditto.
	(vfcvt_rtz_x): Ditto.
	(vfcvt_rtz_xu): Ditto.
	(vfcvt_f): Ditto.
	(vfwcvt_x): Ditto.
	(vfwcvt_xu): Ditto.
	(vfwcvt_rtz_x): Ditto.
	(vfwcvt_rtz_xu): Ditto.
	(vfwcvt_f): Ditto.
	(vfncvt_x): Ditto.
	(vfncvt_xu): Ditto.
	(vfncvt_rtz_x): Ditto.
	(vfncvt_rtz_xu): Ditto.
	(vfncvt_f): Ditto.
	(vfncvt_rod_f): Ditto.
	* config/riscv/riscv-vector-builtins-shapes.cc (struct alu_def): Ditto.
	(struct move_def): Ditto.
	* config/riscv/riscv-vector-builtins-types.def (DEF_RVV_WEXTF_OPS): New macro.
	(DEF_RVV_CONVERT_I_OPS): Ditto.
	(DEF_RVV_CONVERT_U_OPS): Ditto.
	(DEF_RVV_WCONVERT_I_OPS): Ditto.
	(DEF_RVV_WCONVERT_U_OPS): Ditto.
	(DEF_RVV_WCONVERT_F_OPS): Ditto.
	(vfloat64m1_t): Ditto.
	(vfloat64m2_t): Ditto.
	(vfloat64m4_t): Ditto.
	(vfloat64m8_t): Ditto.
	(vint32mf2_t): Ditto.
	(vint32m1_t): Ditto.
	(vint32m2_t): Ditto.
	(vint32m4_t): Ditto.
	(vint32m8_t): Ditto.
	(vint64m1_t): Ditto.
	(vint64m2_t): Ditto.
	(vint64m4_t): Ditto.
	(vint64m8_t): Ditto.
	(vuint32mf2_t): Ditto.
	(vuint32m1_t): Ditto.
	(vuint32m2_t): Ditto.
	(vuint32m4_t): Ditto.
	(vuint32m8_t): Ditto.
	(vuint64m1_t): Ditto.
	(vuint64m2_t): Ditto.
	(vuint64m4_t): Ditto.
	(vuint64m8_t): Ditto.
	* config/riscv/riscv-vector-builtins.cc (DEF_RVV_CONVERT_I_OPS): Ditto.
	(DEF_RVV_CONVERT_U_OPS): Ditto.
	(DEF_RVV_WCONVERT_I_OPS): Ditto.
	(DEF_RVV_WCONVERT_U_OPS): Ditto.
	(DEF_RVV_WCONVERT_F_OPS): Ditto.
	(DEF_RVV_F_OPS): Ditto.
	(DEF_RVV_WEXTF_OPS): Ditto.
	(required_extensions_p): Adjust for floating-point support.
	(check_required_extensions): Ditto.
	(unsigned_base_type_p): Ditto.
	(get_mode_for_bitsize): Ditto.
	(rvv_arg_type_info::get_base_vector_type): Ditto.
	(rvv_arg_type_info::get_tree_type): Ditto.
	* config/riscv/riscv-vector-builtins.def (v_f): New define.
	(f): New define.
	(f_v): New define.
	(xu_v): New define.
	(f_w): New define.
	(xu_w): New define.
	* config/riscv/riscv-vector-builtins.h (enum rvv_base_type): New enum.
	(function_expander::arg_mode): New function.
	* config/riscv/vector-iterators.md (sof): New iterator.
	(vfrecp): Ditto.
	(copysign): Ditto.
	(n): Ditto.
	(msac): Ditto.
	(msub): Ditto.
	(fixuns_trunc): Ditto.
	(floatuns): Ditto.
	* config/riscv/vector.md (@pred_broadcast<mode>): New pattern.
	(@pred_<optab><mode>): Ditto.
	(@pred_<optab><mode>_scalar): Ditto.
	(@pred_<optab><mode>_reverse_scalar): Ditto.
	(@pred_<copysign><mode>): Ditto.
	(@pred_<copysign><mode>_scalar): Ditto.
	(@pred_mul_<optab><mode>): Ditto.
	(pred_mul_<optab><mode>_undef_merge): Ditto.
	(*pred_<madd_nmsub><mode>): Ditto.
	(*pred_<macc_nmsac><mode>): Ditto.
	(*pred_mul_<optab><mode>): Ditto.
	(@pred_mul_<optab><mode>_scalar): Ditto.
	(*pred_mul_<optab><mode>_undef_merge_scalar): Ditto.
	(*pred_<madd_nmsub><mode>_scalar): Ditto.
	(*pred_<macc_nmsac><mode>_scalar): Ditto.
	(*pred_mul_<optab><mode>_scalar): Ditto.
	(@pred_neg_mul_<optab><mode>): Ditto.
	(pred_neg_mul_<optab><mode>_undef_merge): Ditto.
	(*pred_<nmadd_msub><mode>): Ditto.
	(*pred_<nmacc_msac><mode>): Ditto.
	(*pred_neg_mul_<optab><mode>): Ditto.
	(@pred_neg_mul_<optab><mode>_scalar): Ditto.
	(*pred_neg_mul_<optab><mode>_undef_merge_scalar): Ditto.
	(*pred_<nmadd_msub><mode>_scalar): Ditto.
	(*pred_<nmacc_msac><mode>_scalar): Ditto.
	(*pred_neg_mul_<optab><mode>_scalar): Ditto.
	(@pred_<misc_op><mode>): Ditto.
	(@pred_class<mode>): Ditto.
	(@pred_dual_widen_<optab><mode>): Ditto.
	(@pred_dual_widen_<optab><mode>_scalar): Ditto.
	(@pred_single_widen_<plus_minus:optab><mode>): Ditto.
	(@pred_single_widen_<plus_minus:optab><mode>_scalar): Ditto.
	(@pred_widen_mul_<optab><mode>): Ditto.
	(@pred_widen_mul_<optab><mode>_scalar): Ditto.
	(@pred_widen_neg_mul_<optab><mode>): Ditto.
	(@pred_widen_neg_mul_<optab><mode>_scalar): Ditto.
	(@pred_cmp<mode>): Ditto.
	(*pred_cmp<mode>): Ditto.
	(*pred_cmp<mode>_narrow): Ditto.
	(@pred_cmp<mode>_scalar): Ditto.
	(*pred_cmp<mode>_scalar): Ditto.
	(*pred_cmp<mode>_scalar_narrow): Ditto.
	(@pred_eqne<mode>_scalar): Ditto.
	(*pred_eqne<mode>_scalar): Ditto.
	(*pred_eqne<mode>_scalar_narrow): Ditto.
	(@pred_merge<mode>_scalar): Ditto.
	(@pred_fcvt_x<v_su>_f<mode>): Ditto.
	(@pred_<fix_cvt><mode>): Ditto.
	(@pred_<float_cvt><mode>): Ditto.
	(@pred_widen_fcvt_x<v_su>_f<mode>): Ditto.
	(@pred_widen_<fix_cvt><mode>): Ditto.
	(@pred_widen_<float_cvt><mode>): Ditto.
	(@pred_extend<mode>): Ditto.
	(@pred_narrow_fcvt_x<v_su>_f<mode>): Ditto.
	(@pred_narrow_<fix_cvt><mode>): Ditto.
	(@pred_narrow_<float_cvt><mode>): Ditto.
	(@pred_trunc<mode>): Ditto.
	(@pred_rod_trunc<mode>): Ditto.

2023-02-22  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/106258
	* cgraph.cc (cgraph_edge::redirect_call_stmt_to_callee,
	cgraph_update_edges_for_call_stmt_node, cgraph_node::verify_node):
	Handle BUILT_IN_UNREACHABLE_TRAP like BUILT_IN_UNREACHABLE.
	* cgraphclones.cc (cgraph_node::create_clone): Likewise.

2023-02-22  Thomas Schwinge  <thomas@codesourcery.com>

	* common.opt (-Wcomplain-wrong-lang): New.
	* doc/invoke.texi (-Wno-complain-wrong-lang): Document it.
	* opts-common.cc (prune_options): Handle it.
	* opts-global.cc (complain_wrong_lang): Use it.

2023-02-21  David Malcolm  <dmalcolm@redhat.com>

	PR analyzer/108830
	* doc/invoke.texi: Document -fno-analyzer-suppress-followups.

2023-02-21  Max Filippov  <jcmvbkbc@gmail.com>

	PR target/108876
	* config/xtensa/xtensa.cc (xtensa_expand_epilogue): Drop emit_use
	for A0_REG.
	* config/xtensa/xtensa.md (sibcall, sibcall_internal)
	(sibcall_value, sibcall_value_internal): Add 'use' expression
	for A0_REG.

2023-02-21  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/108691
	* tree-ssa-dce.cc (eliminate_unnecessary_stmts): Remove
	assert about calls_setjmp not becoming true when it was false.

2023-02-21  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/108793
	* tree-ssa-loop-niter.cc (number_of_iterations_until_wrap):
	Use convert operands to niter_type when computing num.

2023-02-21  Richard Biener  <rguenther@suse.de>

	Revert:
	2023-02-13  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/108691
	* tree-cfg.cc (notice_special_calls): When the CFG is built
	honor gimple_call_ctrl_altering_p.
	* cfgexpand.cc (expand_call_stmt): Clear cfun->calls_setjmp
	temporarily if the call is not control-altering.
	* calls.cc (emit_call_1): Do not add REG_SETJMP if
	cfun->calls_setjmp is not set.  Do not alter cfun->calls_setjmp.

2023-02-21  Takayuki 'January June' Suwa  <jjsuwa_sys3175@yahoo.co.jp>

	* config/xtensa/xtensa.cc (xtensa_call_save_reg): Change to return
	true if register A0 (return address register) when -Og is specified.

2023-02-20  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/predicates.md
	(general_x64constmem_operand): New predicate.
	* config/i386/i386.md (*cmpqi_ext<mode>_1):
	Use nonimm_x64constmem_operand.
	(*cmpqi_ext<mode>_3): Use general_x64constmem_operand.
	(*addqi_ext<mode>_1): Ditto.
	(*testqi_ext<mode>_1): Ditto.
	(*andqi_ext<mode>_1): Ditto.
	(*andqi_ext<mode>_1_cc): Ditto.
	(*<any_or:code>qi_ext<mode>_1): Ditto.
	(*xorqi_ext<mode>_1_cc): Ditto.

2023-02-20  Jakub Jelinek  <jakub2redhat.com>

	PR target/108862
	* config/rs6000/rs6000.md (umaddditi4): Swap gen_maddlddi4 with
	gen_umadddi4_highpart{,_le}.

2023-02-20  Kito Cheng  <kito.cheng@sifive.com>

	* config/riscv/riscv.md (prefetch): Use r instead of p for the
	address operand.
	(riscv_prefetchi_<mode>): Ditto.

2023-02-20  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/108816
	* tree-vect-loop-manip.cc (vect_loop_versioning): Adjust
	versioning condition split prerequesite, assert required
	invariant.

2023-02-20  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/108825
	* tree-ssa-loop-manip.cc (verify_loop_closed_ssa): For
	loop-local verfication only verify there's no pending SSA
	update.

2023-02-20  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/108819
	* tree-ssa-loop-niter.cc (number_of_iterations_cltz): Check
	we have an SSA name as iv_2 as expected.

2023-02-18  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/108819
	* tree-ssa-reassoc.cc (update_ops): Fold new stmt in place.

2023-02-18  Jakub Jelinek  <jakub@redhat.com>

	PR target/108832
	* config/i386/i386-protos.h (ix86_replace_reg_with_reg): Declare.
	* config/i386/i386-expand.cc (ix86_replace_reg_with_reg): New
	function.
	* config/i386/i386.md: Replace replace_rtx calls in all peephole2s
	with ix86_replace_reg_with_reg.

2023-02-18  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/invoke.texi (AVR Options): Update link to AVR-LibC.

2023-02-18  Xi Ruoyao  <xry111@xry111.site>

	* config.gcc (triplet_abi): Set its value based on $with_abi,
	instead of $target.
	(la_canonical_triplet): Set it after $triplet_abi is set
	correctly.
	* config/loongarch/t-linux (MULTILIB_OSDIRNAMES): Make the
	multiarch tuple for lp64d "loongarch64-linux-gnu" (without
	"f64" suffix).

2023-02-18  Andrew Pinski  <apinski@marvell.com>

	* match.pd: Remove #if GIMPLE around the
	"1 - a" pattern

2023-02-18  Andrew Pinski  <apinski@marvell.com>

	* value-query.h (get_range_query): Return the global ranges
	for a nullptr func.

2023-02-17  Siddhesh Poyarekar  <siddhesh@gotplt.org>

	* doc/invoke.texi (@item -Wall): Fix typo in
	-Wuse-after-free.

2023-02-17  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/108831
	* config/i386/predicates.md
	(nonimm_x64constmem_operand): New predicate.
	* config/i386/i386.md (*addqi_ext<mode>_0): New insn pattern.
	(*subqi_ext<mode>_0): Ditto.
	(*andqi_ext<mode>_0): Ditto.
	(*<any_or:code>qi_ext<mode>_0): Ditto.

2023-02-17  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/108805
	* simplify-rtx.cc (simplify_context::simplify_subreg): Use
	int_outermode instead of GET_MODE (tem) to prevent
	VOIDmode from entering simplify_gen_subreg.

2023-02-17  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/108821
	* tree-ssa-loop-im.cc (sm_seq_valid_bb): We can also not
	move volatile accesses.

2023-02-17  Richard Biener  <rguenther@suse.de>

	* tree-ssa.cc (ssa_undefined_value_p): Assert we are not
	called on virtual operands.
	* tree-ssa-sccvn.cc (vn_phi_lookup): Guard
	ssa_undefined_value_p calls.
	(vn_phi_insert): Likewise.
	(set_ssa_val_to): Likewise.
	(visit_phi): Avoid extra work with equivalences for
	virtual operand PHIs.

2023-02-17  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vector-builtins-bases.cc (class mask_logic): New
	class.
	(class mask_nlogic): Ditto.
	(class mask_notlogic): Ditto.
	(class vmmv): Ditto.
	(class vmclr): Ditto.
	(class vmset): Ditto.
	(class vmnot): Ditto.
	(class vcpop): Ditto.
	(class vfirst): Ditto.
	(class mask_misc): Ditto.
	(class viota): Ditto.
	(class vid): Ditto.
	(BASE): Ditto.
	* config/riscv/riscv-vector-builtins-bases.h: Ditto.
	* config/riscv/riscv-vector-builtins-functions.def (vmand): Ditto.
	(vmnand): Ditto.
	(vmandn): Ditto.
	(vmxor): Ditto.
	(vmor): Ditto.
	(vmnor): Ditto.
	(vmorn): Ditto.
	(vmxnor): Ditto.
	(vmmv): Ditto.
	(vmclr): Ditto.
	(vmset): Ditto.
	(vmnot): Ditto.
	(vcpop): Ditto.
	(vfirst): Ditto.
	(vmsbf): Ditto.
	(vmsif): Ditto.
	(vmsof): Ditto.
	(viota): Ditto.
	(vid): Ditto.
	* config/riscv/riscv-vector-builtins-shapes.cc (struct alu_def): Ditto.
	(struct mask_alu_def): Ditto.
	(SHAPE): Ditto.
	* config/riscv/riscv-vector-builtins-shapes.h: Ditto.
	* config/riscv/riscv-vector-builtins.cc: Ditto.
	* config/riscv/riscv-vsetvl.cc (pass_vsetvl::cleanup_insns): Fix bug
	for dest it scalar RVV intrinsics.
	* config/riscv/vector-iterators.md (sof): New iterator.
	* config/riscv/vector.md (@pred_<optab>n<mode>): New pattern.
	(@pred_<optab>not<mode>): New pattern.
	(@pred_popcount<VB:mode><P:mode>): New pattern.
	(@pred_ffs<VB:mode><P:mode>): New pattern.
	(@pred_<misc_op><mode>): New pattern.
	(@pred_iota<mode>): New pattern.
	(@pred_series<mode>): New pattern.

2023-02-17  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vector-builtins-functions.def (vadc): Rename.
	(vsbc): Ditto.
	(vmerge): Ditto.
	(vmv_v): Ditto.
	* config/riscv/riscv-vector-builtins.cc: Ditto.

2023-02-17  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>
	    kito-cheng  <kito.cheng@sifive.com>

	* config/riscv/riscv-protos.h (sew64_scalar_helper): New function.
	* config/riscv/riscv-v.cc (has_vi_variant_p): Adjust.
	(sew64_scalar_helper): New function.
	* config/riscv/vector.md: Normalization.

2023-02-17  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vector-builtins-functions.def (vsetvlmax): Rearrange.
	(vsm): Ditto.
	(vsse): Ditto.
	(vsoxei64): Ditto.
	(vsub): Ditto.
	(vand): Ditto.
	(vor): Ditto.
	(vxor): Ditto.
	(vsll): Ditto.
	(vsra): Ditto.
	(vsrl): Ditto.
	(vmin): Ditto.
	(vmax): Ditto.
	(vminu): Ditto.
	(vmaxu): Ditto.
	(vmul): Ditto.
	(vmulh): Ditto.
	(vmulhu): Ditto.
	(vmulhsu): Ditto.
	(vdiv): Ditto.
	(vrem): Ditto.
	(vdivu): Ditto.
	(vremu): Ditto.
	(vnot): Ditto.
	(vsext): Ditto.
	(vzext): Ditto.
	(vwadd): Ditto.
	(vwsub): Ditto.
	(vwmul): Ditto.
	(vwmulu): Ditto.
	(vwmulsu): Ditto.
	(vwaddu): Ditto.
	(vwsubu): Ditto.
	(vsbc): Ditto.
	(vmsbc): Ditto.
	(vnsra): Ditto.
	(vmerge): Ditto.
	(vmv_v): Ditto.
	(vmsne): Ditto.
	(vmslt): Ditto.
	(vmsgt): Ditto.
	(vmsle): Ditto.
	(vmsge): Ditto.
	(vmsltu): Ditto.
	(vmsgtu): Ditto.
	(vmsleu): Ditto.
	(vmsgeu): Ditto.
	(vnmsac): Ditto.
	(vmadd): Ditto.
	(vnmsub): Ditto.
	(vwmacc): Ditto.
	(vsadd): Ditto.
	(vssub): Ditto.
	(vssubu): Ditto.
	(vaadd): Ditto.
	(vasub): Ditto.
	(vasubu): Ditto.
	(vsmul): Ditto.
	(vssra): Ditto.
	(vssrl): Ditto.
	(vnclip): Ditto.

2023-02-17  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/vector.md (@pred_<optab><mode>): Rearrange.
	(@pred_<optab><mode>_scalar): Ditto.
	(*pred_<optab><mode>_scalar): Ditto.
	(*pred_<optab><mode>_extended_scalar): Ditto.

2023-02-17  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-protos.h (riscv_run_selftests): Remove 'extern'.
	(init_builtins): Ditto.
	(mangle_builtin_type): Ditto.
	(verify_type_context): Ditto.
	(handle_pragma_vector):  Ditto.
	(builtin_decl): Ditto.
	(expand_builtin): Ditto.
	(const_vec_all_same_in_range_p): Ditto.
	(legitimize_move): Ditto.
	(emit_vlmax_op): Ditto.
	(emit_nonvlmax_op): Ditto.
	(get_vlmul): Ditto.
	(get_ratio): Ditto.
	(get_ta): Ditto.
	(get_ma): Ditto.
	(get_avl_type): Ditto.
	(calculate_ratio): Ditto.
	(enum vlmul_type): Ditto.
	(simm5_p): Ditto.
	(neg_simm5_p): Ditto.
	(has_vi_variant_p): Ditto.

2023-02-17  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-protos.h (simm32_p): Remove.
	* config/riscv/riscv-v.cc (simm32_p): Ditto.
	* config/riscv/vector.md: Use immediate_operand
	instead of riscv_vector::simm32_p.

2023-02-16  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/invoke.texi (Optimize Options): Reword the explanation
	getting minimal, maximal and default values of a parameter.

2023-02-16  Patrick Palka  <ppalka@redhat.com>

	* addresses.h: Mechanically drop 'static' from 'static inline'
	functions via s/^static inline/inline/g.
	* asan.h: Likewise.
	* attribs.h: Likewise.
	* basic-block.h: Likewise.
	* bitmap.h: Likewise.
	* cfghooks.h: Likewise.
	* cfgloop.h: Likewise.
	* cgraph.h: Likewise.
	* cselib.h: Likewise.
	* data-streamer.h: Likewise.
	* debug.h: Likewise.
	* df.h: Likewise.
	* diagnostic.h: Likewise.
	* dominance.h: Likewise.
	* dumpfile.h: Likewise.
	* emit-rtl.h: Likewise.
	* except.h: Likewise.
	* expmed.h: Likewise.
	* expr.h: Likewise.
	* fixed-value.h: Likewise.
	* gengtype.h: Likewise.
	* gimple-expr.h: Likewise.
	* gimple-iterator.h: Likewise.
	* gimple-predict.h: Likewise.
	* gimple-range-fold.h: Likewise.
	* gimple-ssa.h: Likewise.
	* gimple.h: Likewise.
	* graphite.h: Likewise.
	* hard-reg-set.h: Likewise.
	* hash-map.h: Likewise.
	* hash-set.h: Likewise.
	* hash-table.h: Likewise.
	* hwint.h: Likewise.
	* input.h: Likewise.
	* insn-addr.h: Likewise.
	* internal-fn.h: Likewise.
	* ipa-fnsummary.h: Likewise.
	* ipa-icf-gimple.h: Likewise.
	* ipa-inline.h: Likewise.
	* ipa-modref.h: Likewise.
	* ipa-prop.h: Likewise.
	* ira-int.h: Likewise.
	* ira.h: Likewise.
	* lra-int.h: Likewise.
	* lra.h: Likewise.
	* lto-streamer.h: Likewise.
	* memmodel.h: Likewise.
	* omp-general.h: Likewise.
	* optabs-query.h: Likewise.
	* optabs.h: Likewise.
	* plugin.h: Likewise.
	* pretty-print.h: Likewise.
	* range.h: Likewise.
	* read-md.h: Likewise.
	* recog.h: Likewise.
	* regs.h: Likewise.
	* rtl-iter.h: Likewise.
	* rtl.h: Likewise.
	* sbitmap.h: Likewise.
	* sched-int.h: Likewise.
	* sel-sched-ir.h: Likewise.
	* sese.h: Likewise.
	* sparseset.h: Likewise.
	* ssa-iterators.h: Likewise.
	* system.h: Likewise.
	* target-globals.h: Likewise.
	* target.h: Likewise.
	* timevar.h: Likewise.
	* tree-chrec.h: Likewise.
	* tree-data-ref.h: Likewise.
	* tree-iterator.h: Likewise.
	* tree-outof-ssa.h: Likewise.
	* tree-phinodes.h: Likewise.
	* tree-scalar-evolution.h: Likewise.
	* tree-sra.h: Likewise.
	* tree-ssa-alias.h: Likewise.
	* tree-ssa-live.h: Likewise.
	* tree-ssa-loop-manip.h: Likewise.
	* tree-ssa-loop.h: Likewise.
	* tree-ssa-operands.h: Likewise.
	* tree-ssa-propagate.h: Likewise.
	* tree-ssa-sccvn.h: Likewise.
	* tree-ssa.h: Likewise.
	* tree-ssanames.h: Likewise.
	* tree-streamer.h: Likewise.
	* tree-switch-conversion.h: Likewise.
	* tree-vectorizer.h: Likewise.
	* tree.h: Likewise.
	* wide-int.h: Likewise.

2023-02-16  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/108657
	* tree-ssa-dse.cc (initialize_ao_ref_for_dse): If lhs of stmt
	exists and is not a SSA_NAME, call ao_ref_init even if the stmt
	is a call to internal or builtin function.

2023-02-16  Jonathan Wakely  <jwakely@redhat.com>

	* doc/invoke.texi (C++ Dialect Options): Suggest adding a
	using-declaration to unhide functions.

2023-02-16  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/108783
	* tree-ssa-reassoc.cc (eliminate_redundant_comparison): If lcode
	is equal to TREE_CODE (t), op1 to newop1 and op2 to newop2, set
	t to curr->op.  Otherwise, punt if either newop1 or newop2 are
	SSA_NAME_OCCURS_IN_ABNORMAL_PHI SSA_NAMEs.

2023-02-16  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/108791
	* tree-ssa-forwprop.cc (optimize_vector_load): Build
	the ADDR_EXPR of a TARGET_MEM_REF using a more meaningful
	type.

2023-02-15  Eric Botcazou  <ebotcazou@adacore.com>

	PR target/90458
	* config/i386/i386.cc (ix86_compute_frame_layout): Disable the
	effects of -fstack-clash-protection for TARGET_STACK_PROBE.
	(ix86_expand_prologue): Likewise.

2023-02-15  Jan-Benedict Glaw  <jbglaw@lug-owl.de>

	* config/bpf/bpf.cc (bpf_option_override): Fix doubled space.

2023-02-15  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (*cmpqi_ext<mode>_1): Use
	int248_register_operand predicate in zero_extract sub-RTX.
	(*cmpqi_ext<mode>_2): Ditto.
	(*cmpqi_ext<mode>_3): Ditto.
	(*cmpqi_ext<mode>_4): Ditto.
	(*extzvqi_mem_rex64): Ditto.
	(*extzvqi): Ditto.
	(*insvqi_1_mem_rex64): Ditto.
	(@insv<mode>_1): Ditto.
	(*insvqi_1): Ditto.
	(*insvqi_2): Ditto.
	(*insvqi_3): Ditto.
	(*extendqi<SWI24:mode>_ext_1): Ditto.
	(*addqi_ext<mode>_1): Ditto.
	(*addqi_ext<mode>_2): Ditto.
	(*subqi_ext<mode>_2): Ditto.
	(*testqi_ext<mode>_1): Ditto.
	(*testqi_ext<mode>_2): Ditto.
	(*andqi_ext<mode>_1): Ditto.
	(*andqi_ext<mode>_1_cc): Ditto.
	(*andqi_ext<mode>_2): Ditto.
	(*<any_or:code>qi_ext<mode>_1): Ditto.
	(*<any_or:code>qi_ext<mode>_2): Ditto.
	(*xorqi_ext<mode>_1_cc): Ditto.
	(*negqi_ext<mode>_2): Ditto.
	(*ashlqi_ext<mode>_2): Ditto.
	(*<any_shiftrt:insn>qi_ext<mode>_2): Ditto.

2023-02-15  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/predicates.md (int248_register_operand):
	Rename from extr_register_operand.
	* config/i386/i386.md (*extv<mode>): Update for renamed predicate.
	(*extzx<mode>): Ditto.
	(*ashl<dwi>3_doubleword_mask): Use int248_register_operand predicate.
	(*ashl<mode>3_mask): Ditto.
	(*<any_shiftrt:insn><mode>3_mask): Ditto.
	(*<any_shiftrt:insn><dwi>3_doubleword_mask): Ditto.
	(*<any_rotate:insn><mode>3_mask): Ditto.
	(*<btsc><mode>_mask): Ditto.
	(*btr<mode>_mask): Ditto.
	(*jcc_bt<mode>_mask_1): Ditto.

2023-02-15  Richard Biener  <rguenther@suse.de>

	PR middle-end/26854
	* df-core.cc (df_worklist_propagate_forward): Put later
	blocks on worklist and only earlier blocks on pending.
	(df_worklist_propagate_backward): Likewise.
	(df_worklist_dataflow_doublequeue): Change the iteration
	to process new blocks in the same iteration if that
	maintains the iteration order.

2023-02-15  Marek Polacek  <polacek@redhat.com>

	PR middle-end/106080
	* gimple-ssa-warn-access.cc (is_auto_decl): Remove.  Use auto_var_p
	instead.

2023-02-15  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/predicates.md: Refine codes.
	* config/riscv/riscv-protos.h (RVV_VUNDEF): New macro.
	* config/riscv/riscv-v.cc: Refine codes.
	* config/riscv/riscv-vector-builtins-bases.cc (enum ternop_type): New
	enum.
	(class imac): New class.
	(enum widen_ternop_type): New enum.
	(class iwmac): New class.
	(BASE): New class.
	* config/riscv/riscv-vector-builtins-bases.h: Ditto.
	* config/riscv/riscv-vector-builtins-functions.def (vmacc): Ditto.
	(vnmsac): Ditto.
	(vmadd): Ditto.
	(vnmsub): Ditto.
	(vwmacc): Ditto.
	(vwmaccu): Ditto.
	(vwmaccsu): Ditto.
	(vwmaccus): Ditto.
	* config/riscv/riscv-vector-builtins.cc
	(function_builder::apply_predication): Adjust for multiply-add support.
	(function_expander::add_vundef_operand): Refine codes.
	(function_expander::use_ternop_insn): New function.
	(function_expander::use_widen_ternop_insn): Ditto.
	* config/riscv/riscv-vector-builtins.h: New function.
	* config/riscv/vector.md (@pred_mul_<optab><mode>): New pattern.
	(pred_mul_<optab><mode>_undef_merge): Ditto.
	(*pred_<madd_nmsub><mode>): Ditto.
	(*pred_<macc_nmsac><mode>): Ditto.
	(*pred_mul_<optab><mode>): Ditto.
	(@pred_mul_<optab><mode>_scalar): Ditto.
	(*pred_mul_<optab><mode>_undef_merge_scalar): Ditto.
	(*pred_<madd_nmsub><mode>_scalar): Ditto.
	(*pred_<macc_nmsac><mode>_scalar): Ditto.
	(*pred_mul_<optab><mode>_scalar): Ditto.
	(*pred_mul_<optab><mode>_undef_merge_extended_scalar): Ditto.
	(*pred_<madd_nmsub><mode>_extended_scalar): Ditto.
	(*pred_<macc_nmsac><mode>_extended_scalar): Ditto.
	(*pred_mul_<optab><mode>_extended_scalar): Ditto.
	(@pred_widen_mul_plus<su><mode>): Ditto.
	(@pred_widen_mul_plus<su><mode>_scalar): Ditto.
	(@pred_widen_mul_plussu<mode>): Ditto.
	(@pred_widen_mul_plussu<mode>_scalar): Ditto.
	(@pred_widen_mul_plusus<mode>_scalar): Ditto.

2023-02-15  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/predicates.md (vector_mask_operand): Refine the codes.
	(vector_all_trues_mask_operand): New predicate.
	(vector_undef_operand): New predicate.
	(ltge_operator): New predicate.
	(comparison_except_ltge_operator): New predicate.
	(comparison_except_eqge_operator): New predicate.
	(ge_operator): New predicate.
	* config/riscv/riscv-v.cc (has_vi_variant_p): Add compare support.
	* config/riscv/riscv-vector-builtins-bases.cc (class icmp): New class.
	(BASE): Ditto.
	* config/riscv/riscv-vector-builtins-bases.h: Ditto.
	* config/riscv/riscv-vector-builtins-functions.def (vmseq): Ditto.
	(vmsne): Ditto.
	(vmslt): Ditto.
	(vmsgt): Ditto.
	(vmsle): Ditto.
	(vmsge): Ditto.
	(vmsltu): Ditto.
	(vmsgtu): Ditto.
	(vmsleu): Ditto.
	(vmsgeu): Ditto.
	* config/riscv/riscv-vector-builtins-shapes.cc
	(struct return_mask_def): Adjust for compare support.
	* config/riscv/riscv-vector-builtins.cc
	(function_expander::use_compare_insn): New function.
	* config/riscv/riscv-vector-builtins.h
	(function_expander::add_integer_operand): Ditto.
	* config/riscv/riscv.cc (riscv_print_operand): Add compare support.
	* config/riscv/riscv.md: Add vector min/max attributes.
	* config/riscv/vector-iterators.md (xnor): New iterator.
	* config/riscv/vector.md (@pred_cmp<mode>): New pattern.
	(*pred_cmp<mode>): Ditto.
	(*pred_cmp<mode>_narrow): Ditto.
	(@pred_ltge<mode>): Ditto.
	(*pred_ltge<mode>): Ditto.
	(*pred_ltge<mode>_narrow): Ditto.
	(@pred_cmp<mode>_scalar): Ditto.
	(*pred_cmp<mode>_scalar): Ditto.
	(*pred_cmp<mode>_scalar_narrow): Ditto.
	(@pred_eqne<mode>_scalar): Ditto.
	(*pred_eqne<mode>_scalar): Ditto.
	(*pred_eqne<mode>_scalar_narrow): Ditto.
	(*pred_cmp<mode>_extended_scalar): Ditto.
	(*pred_cmp<mode>_extended_scalar_narrow): Ditto.
	(*pred_eqne<mode>_extended_scalar): Ditto.
	(*pred_eqne<mode>_extended_scalar_narrow): Ditto.
	(@pred_ge<mode>_scalar): Ditto.
	(@pred_<optab><mode>): Ditto.
	(@pred_n<optab><mode>): Ditto.
	(@pred_<optab>n<mode>): Ditto.
	(@pred_not<mode>): Ditto.

2023-02-15  Martin Jambor  <mjambor@suse.cz>

	PR ipa/108679
	* ipa-sra.cc (push_param_adjustments_for_index): Do not omit
	creation of non-scalar replacements even if IPA-CP knows their
	contents.

2023-02-15  Jakub Jelinek  <jakub@redhat.com>

	PR target/108787
	PR target/103109
	* config/rs6000/rs6000.md (<u>maddditi4): Change into umaddditi4 only
	expander, change operand 3 to be TImode, emit maddlddi4 and
	umadddi4_highpart{,_le} with its low half and finally add the high
	half to the result.

2023-02-15  Martin Liska  <mliska@suse.cz>

	* doc/invoke.texi: Document --param=asan-kernel-mem-intrinsic-prefix.

2023-02-15  Richard Biener  <rguenther@suse.de>

	* sanopt.cc (sanitize_asan_mark_unpoison): Use bitmap
	for with_poison and alias worklist to it.
	(sanitize_asan_mark_poison): Likewise.

2023-02-15  Richard Biener  <rguenther@suse.de>

	PR target/108738
	* config/i386/i386-features.cc (scalar_chain::add_to_queue):
	Combine bitmap test and set.
	(scalar_chain::add_insn): Likewise.
	(scalar_chain::analyze_register_chain): Remove redundant
	attempt to add to queue and instead strengthen assert.
	Sink common attempts to mark the def dual-mode.
	(scalar_chain::add_to_queue): Remove redundant insn bitmap
	check.

2023-02-15  Richard Biener  <rguenther@suse.de>

	PR target/108738
	* config/i386/i386-features.cc (convert_scalars_to_vector):
	Switch candidates bitmaps to tree view before building the chains.

2023-02-15  Hans-Peter Nilsson  <hp@axis.com>

	* reload1.cc (gen_reload): Correct rtx parameter for fatal_insn
	"failure trying to reload" call.

2023-02-15  Hans-Peter Nilsson  <hp@axis.com>

	* gdbinit.in (phrs): New command.
	* sel-sched-dump.cc (debug_hard_reg_set): Remove debug-function.
	* ira-color.cc (debug_hard_reg_set): New, calling print_hard_reg_set.

2023-02-14  David Faust  <david.faust@oracle.com>

	PR target/108790
	* config/bpf/constraints.md (q): New memory constraint.
	* config/bpf/bpf.md (zero_extendhidi2): Use it here.
	(zero_extendqidi2): Likewise.
	(zero_extendsidi2): Likewise.
	(*mov<MM:mode>): Likewise.

2023-02-14  Andrew Pinski  <apinski@marvell.com>

	PR tree-optimization/108355
	PR tree-optimization/96921
	* match.pd: Add pattern for "1 - bool_val".

2023-02-14  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.cc (vn_phi_compute_hash): Key skipping
	basic block index hashing on the availability of ->cclhs.
	(vn_phi_eq): Avoid re-doing sanity checks for CSE but
	rely on ->cclhs availability.
	(vn_phi_lookup): Set ->cclhs only when we are eventually
	going to CSE the PHI.
	(vn_phi_insert): Likewise.

2023-02-14  Eric Botcazou  <ebotcazou@adacore.com>

	* gimplify.cc (gimplify_save_expr): Add missing guard.

2023-02-14  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/108782
	* tree-vect-loop.cc (vect_phi_first_order_recurrence_p):
	Make sure we're not vectorizing an inner loop.

2023-02-14  Jakub Jelinek  <jakub@redhat.com>

	PR sanitizer/108777
	* params.opt (-param=asan-kernel-mem-intrinsic-prefix=): New param.
	* asan.h (asan_memfn_rtl): Declare.
	* asan.cc (asan_memfn_rtls): New variable.
	(asan_memfn_rtl): New function.
	* builtins.cc (expand_builtin): If
	param_asan_kernel_mem_intrinsic_prefix and function is
	kernel-{,hw}address sanitized, emit calls to
	__{,hw}asan_{memcpy,memmove,memset} rather than
	{memcpy,memmove,memset}.  Use sanitize_flags_p (SANITIZE_ADDRESS)
	instead of flag_sanitize & SANITIZE_ADDRESS to check if
	asan_intercepted_p functions shouldn't be expanded inline.

2023-02-14  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/96373
	* tree-vect-stmts.cc (vectorizable_operation): Predicate trapping
	operations on the loop mask.  Reject partial vectors if this isn't
	possible.

2023-02-13  Richard Sandiford  <richard.sandiford@arm.com>

	PR rtl-optimization/108681
	* lra-spills.cc (lra_final_code_change): Extend subreg replacement
	code to handle bare uses and clobbers.

2023-02-13  Vladimir N. Makarov  <vmakarov@redhat.com>

	* ira.cc (ira_update_equiv_info_by_shuffle_insn): Clear equiv
	caller_save_p flag when clearing defined_p flag.
	(setup_reg_equiv): Ditto.
	* lra-constraints.cc (lra_constraints): Ditto.

2023-02-13  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/108516
	* config/i386/predicates.md (extr_register_operand):
	New special predicate.
	* config/i386/i386.md (*extv<mode>): Use extr_register_operand
	as operand 1 predicate.
	(*exzv<mode>): Ditto.
	(*extendqi<SWI24:mode>_ext_1): New insn pattern.

2023-02-13  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/28614
	* tree-ssa-sccvn.cc (can_track_predicate_on_edge): Avoid
	walking all edges in most cases.
	(vn_nary_op_insert_pieces_predicated): Avoid repeated
	calls to can_track_predicate_on_edge unless checking is
	enabled.
	(process_bb): Instead call it once here for each edge
	we register possibly multiple predicates on.

2023-02-13  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/108691
	* tree-cfg.cc (notice_special_calls): When the CFG is built
	honor gimple_call_ctrl_altering_p.
	* cfgexpand.cc (expand_call_stmt): Clear cfun->calls_setjmp
	temporarily if the call is not control-altering.
	* calls.cc (emit_call_1): Do not add REG_SETJMP if
	cfun->calls_setjmp is not set.  Do not alter cfun->calls_setjmp.

2023-02-13  Stefan Schulze Frielinghaus  <stefansf@linux.ibm.com>

	PR target/108102
	* config/s390/s390.cc (s390_bb_fallthru_entry_likely): Remove.
	(struct s390_sched_state): Initialise to zero.
	(s390_sched_variable_issue): For better debuggability also emit
	the current side.
	(s390_sched_init): Unconditionally reset scheduler state.

2023-02-13  Richard Sandiford  <richard.sandiford@arm.com>

	* ifcvt.h (noce_if_info::cond_inverted): New field.
	* ifcvt.cc (cond_move_convert_if_block): Swap the then and else
	values when cond_inverted is true.
	(noce_find_if_block): Allow the condition to be inverted when
	handling conditional moves.

2023-02-13  Stefan Schulze Frielinghaus  <stefansf@linux.ibm.com>

	* config/s390/predicates.md (execute_operation): Use
	constrain_operands instead of extract_constrain_insn in order to
	determine wheter there exists a valid alternative.

2023-02-13  Claudiu Zissulescu  <claziss@gmail.com>

	* common/config/arc/arc-common.cc (arc_option_optimization_table):
	Remove millicode from list.

2023-02-13  Martin Liska  <mliska@suse.cz>

	* doc/invoke.texi: Document ira-simple-lra-insn-threshold.

2023-02-13  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/106722
	* tree-ssa-dce.cc (mark_last_stmt_necessary): Return
	whether we marked a stmt.
	(mark_control_dependent_edges_necessary): When
	mark_last_stmt_necessary didn't mark any stmt make sure
	to mark its control dependent edges.
	(propagate_necessity): Likewise.

2023-02-13  Kito Cheng  <kito.cheng@sifive.com>

	* config/riscv/riscv.h (RISCV_DWARF_VLENB): New.
	(DWARF_FRAME_REGISTERS): New.
	(DWARF_REG_TO_UNWIND_COLUMN): New.

2023-02-12  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/sourcebuild.texi: Remove (broken) direct reference to
	"The GNU configure and build system".

2023-02-12  Jin Ma  <jinma@linux.alibaba.com>

	* config/riscv/riscv.cc (riscv_adjust_libcall_cfi_prologue): Change
	gen_add3_insn to gen_rtx_SET.
	(riscv_adjust_libcall_cfi_epilogue): Likewise.

2023-02-12  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vector-builtins-bases.cc (class sat_op): New class.
	(class vnclip): Ditto.
	(BASE): Ditto.
	* config/riscv/riscv-vector-builtins-bases.h: Ditto.
	* config/riscv/riscv-vector-builtins-functions.def (vaadd): Ditto.
	(vasub): Ditto.
	(vaaddu): Ditto.
	(vasubu): Ditto.
	(vsmul): Ditto.
	(vssra): Ditto.
	(vssrl): Ditto.
	(vnclipu): Ditto.
	(vnclip): Ditto.
	* config/riscv/vector-iterators.md (su): Add instruction.
	(aadd): Ditto.
	(vaalu): Ditto.
	* config/riscv/vector.md (@pred_<sat_op><mode>): New pattern.
	(@pred_<sat_op><mode>_scalar): Ditto.
	(*pred_<sat_op><mode>_scalar): Ditto.
	(*pred_<sat_op><mode>_extended_scalar): Ditto.
	(@pred_narrow_clip<v_su><mode>): Ditto.
	(@pred_narrow_clip<v_su><mode>_scalar): Ditto.

2023-02-12  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/constraints.md (Wbr): Remove unused constraint.
	* config/riscv/predicates.md: Fix move operand predicate.
	* config/riscv/riscv-vector-builtins-bases.cc (class vnshift): New class.
	(class vncvt_x): Ditto.
	(class vmerge): Ditto.
	(class vmv_v): Ditto.
	(BASE): Ditto.
	* config/riscv/riscv-vector-builtins-bases.h: Ditto.
	* config/riscv/riscv-vector-builtins-functions.def (vsra): Ditto.
	(vsrl): Ditto.
	(vnsrl): Ditto.
	(vnsra): Ditto.
	(vncvt_x): Ditto.
	(vmerge): Ditto.
	(vmv_v): Ditto.
	* config/riscv/riscv-vector-builtins-shapes.cc (struct narrow_alu_def): Ditto.
	(struct move_def): Ditto.
	(SHAPE): Ditto.
	* config/riscv/riscv-vector-builtins-shapes.h: Ditto.
	* config/riscv/riscv-vector-builtins.cc (DEF_RVV_WEXTI_OPS): New variable.
	(DEF_RVV_WEXTU_OPS): Ditto
	* config/riscv/riscv-vector-builtins.def (x_x_w): Fix type for suffix.
	(v_v): Ditto.
	(v_x): Ditto.
	(x_w): Ditto.
	(x): Ditto.
	* config/riscv/riscv.cc (riscv_print_operand): Refine ASM printting rule.
	* config/riscv/vector-iterators.md (nmsac):New iterator.
	(nmsub): New iterator.
	* config/riscv/vector.md (@pred_merge<mode>): New pattern.
	(@pred_merge<mode>_scalar): New pattern.
	(*pred_merge<mode>_scalar): New pattern.
	(*pred_merge<mode>_extended_scalar): New pattern.
	(@pred_narrow_<optab><mode>): New pattern.
	(@pred_narrow_<optab><mode>_scalar): New pattern.
	(@pred_trunc<mode>): New pattern.

2023-02-12  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vector-builtins-bases.cc (class vmadc): New class.
	(class vmsbc): Ditto.
	(BASE): Define new class.
	* config/riscv/riscv-vector-builtins-bases.h: Ditto.
	* config/riscv/riscv-vector-builtins-functions.def (vmadc): New define.
	(vmsbc): Ditto.
	* config/riscv/riscv-vector-builtins-shapes.cc (struct return_mask_def):
	New class.
	(SHAPE): Ditto.
	* config/riscv/riscv-vector-builtins-shapes.h: Ditto.
	* config/riscv/riscv-vector-builtins.cc
	(function_expander::use_exact_insn): Adjust for new support
	* config/riscv/riscv-vector-builtins.h
	(function_base::has_merge_operand_p): New function.
	* config/riscv/vector-iterators.md: New iterator.
	* config/riscv/vector.md (@pred_madc<mode>): New pattern.
	(@pred_msbc<mode>): Ditto.
	(@pred_madc<mode>_scalar): Ditto.
	(@pred_msbc<mode>_scalar): Ditto.
	(*pred_madc<mode>_scalar): Ditto.
	(*pred_madc<mode>_extended_scalar): Ditto.
	(*pred_msbc<mode>_scalar): Ditto.
	(*pred_msbc<mode>_extended_scalar): Ditto.
	(@pred_madc<mode>_overflow): Ditto.
	(@pred_msbc<mode>_overflow): Ditto.
	(@pred_madc<mode>_overflow_scalar): Ditto.
	(@pred_msbc<mode>_overflow_scalar): Ditto.
	(*pred_madc<mode>_overflow_scalar): Ditto.
	(*pred_madc<mode>_overflow_extended_scalar): Ditto.
	(*pred_msbc<mode>_overflow_scalar): Ditto.
	(*pred_msbc<mode>_overflow_extended_scalar): Ditto.

2023-02-12  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-protos.h (simm5_p): Add vadc/vsbc support.
	* config/riscv/riscv-v.cc (simm32_p): Ditto.
	* config/riscv/riscv-vector-builtins-bases.cc (class vadc): New class.
	(class vsbc): Ditto.
	(BASE): Ditto.
	* config/riscv/riscv-vector-builtins-bases.h: Ditto.
	* config/riscv/riscv-vector-builtins-functions.def (vadc): Ditto.
	(vsbc): Ditto.
	* config/riscv/riscv-vector-builtins-shapes.cc
	(struct no_mask_policy_def): Ditto.
	(SHAPE): Ditto.
	* config/riscv/riscv-vector-builtins-shapes.h: Ditto.
	* config/riscv/riscv-vector-builtins.cc
	(rvv_arg_type_info::get_base_vector_type): Add vadc/vsbc support.
	(rvv_arg_type_info::get_tree_type): Ditto.
	(function_expander::use_exact_insn): Ditto.
	* config/riscv/riscv-vector-builtins.h (enum rvv_base_type): Ditto.
	(function_base::use_mask_predication_p): New function.
	* config/riscv/vector-iterators.md: New iterator.
	* config/riscv/vector.md (@pred_adc<mode>): New pattern.
	(@pred_sbc<mode>): Ditto.
	(@pred_adc<mode>_scalar): Ditto.
	(@pred_sbc<mode>_scalar): Ditto.
	(*pred_adc<mode>_scalar): Ditto.
	(*pred_adc<mode>_extended_scalar): Ditto.
	(*pred_sbc<mode>_scalar): Ditto.
	(*pred_sbc<mode>_extended_scalar): Ditto.

2023-02-12  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/vector.md: use "zero" reg.

2023-02-12  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vector-builtins-bases.cc (class widen_binop): New
	class.
	(class vwmulsu): Ditto.
	(class vwcvt): Ditto.
	(BASE): Add integer widening support.
	* config/riscv/riscv-vector-builtins-bases.h: Ditto
	* config/riscv/riscv-vector-builtins-functions.def (vwadd): New class.
	(vwsub): New class.
	(vwmul): New class.
	(vwmulu): New class.
	(vwmulsu): New class.
	(vwaddu): New class.
	(vwsubu): New class.
	(vwcvt_x): New class.
	(vwcvtu_x): New class.
	* config/riscv/riscv-vector-builtins-shapes.cc (struct alu_def): New
	class.
	(struct widen_alu_def): New class.
	(SHAPE): New class.
	* config/riscv/riscv-vector-builtins-shapes.h: New class.
	* config/riscv/riscv-vector-builtins.cc
	(rvv_arg_type_info::get_base_vector_type): Add integer widening support.
	(rvv_arg_type_info::get_tree_type): Ditto.
	* config/riscv/riscv-vector-builtins.def (x_x_v): Change into "x_v"
	(x_v): Ditto.
	* config/riscv/riscv-vector-builtins.h (enum rvv_base_type): Add integer
	widening support.
	* config/riscv/riscv-vsetvl.cc (change_insn): Fix reg_equal use bug.
	* config/riscv/riscv.h (X0_REGNUM): New constant.
	* config/riscv/vector-iterators.md: New iterators.
	* config/riscv/vector.md
	(@pred_dual_widen_<any_widen_binop:optab><any_extend:su><mode>): New
	pattern.
	(@pred_dual_widen_<any_widen_binop:optab><any_extend:su><mode>_scalar):
	Ditto.
	(@pred_single_widen_<plus_minus:optab><any_extend:su><mode>): Ditto.
	(@pred_single_widen_<plus_minus:optab><any_extend:su><mode>_scalar):
	Ditto.
	(@pred_widen_mulsu<mode>): Ditto.
	(@pred_widen_mulsu<mode>_scalar): Ditto.
	(@pred_<optab><mode>): Ditto.

2023-02-12  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>
	    kito-cheng  <kito.cheng@sifive.com>

	* common/config/riscv/riscv-common.cc: Add flag for 'V' extension.
	* config/riscv/riscv-vector-builtins-bases.cc (class vmulh): New class.
	(BASE): Ditto.
	* config/riscv/riscv-vector-builtins-bases.h: Ditto.
	* config/riscv/riscv-vector-builtins-functions.def (vmulh): Add vmulh
	API support.
	(vmulhu): Ditto.
	(vmulhsu): Ditto.
	* config/riscv/riscv-vector-builtins-types.def (DEF_RVV_FULL_V_I_OPS):
	New macro.
	(DEF_RVV_FULL_V_U_OPS): Ditto.
	(vint8mf8_t): Ditto.
	(vint8mf4_t): Ditto.
	(vint8mf2_t): Ditto.
	(vint8m1_t): Ditto.
	(vint8m2_t): Ditto.
	(vint8m4_t): Ditto.
	(vint8m8_t): Ditto.
	(vint16mf4_t): Ditto.
	(vint16mf2_t): Ditto.
	(vint16m1_t): Ditto.
	(vint16m2_t): Ditto.
	(vint16m4_t): Ditto.
	(vint16m8_t): Ditto.
	(vint32mf2_t): Ditto.
	(vint32m1_t): Ditto.
	(vint32m2_t): Ditto.
	(vint32m4_t): Ditto.
	(vint32m8_t): Ditto.
	(vint64m1_t): Ditto.
	(vint64m2_t): Ditto.
	(vint64m4_t): Ditto.
	(vint64m8_t): Ditto.
	(vuint8mf8_t): Ditto.
	(vuint8mf4_t): Ditto.
	(vuint8mf2_t): Ditto.
	(vuint8m1_t): Ditto.
	(vuint8m2_t): Ditto.
	(vuint8m4_t): Ditto.
	(vuint8m8_t): Ditto.
	(vuint16mf4_t): Ditto.
	(vuint16mf2_t): Ditto.
	(vuint16m1_t): Ditto.
	(vuint16m2_t): Ditto.
	(vuint16m4_t): Ditto.
	(vuint16m8_t): Ditto.
	(vuint32mf2_t): Ditto.
	(vuint32m1_t): Ditto.
	(vuint32m2_t): Ditto.
	(vuint32m4_t): Ditto.
	(vuint32m8_t): Ditto.
	(vuint64m1_t): Ditto.
	(vuint64m2_t): Ditto.
	(vuint64m4_t): Ditto.
	(vuint64m8_t): Ditto.
	* config/riscv/riscv-vector-builtins.cc (DEF_RVV_FULL_V_I_OPS): Ditto.
	(DEF_RVV_FULL_V_U_OPS): Ditto.
	(check_required_extensions): Add vmulh support.
	(rvv_arg_type_info::get_tree_type): Ditto.
	* config/riscv/riscv-vector-builtins.h (RVV_REQUIRE_FULL_V): Ditto.
	(enum rvv_base_type): Ditto.
	* config/riscv/riscv.opt: Add 'V' extension flag.
	* config/riscv/vector-iterators.md (su): New iterator.
	* config/riscv/vector.md (@pred_mulh<v_su><mode>): New pattern.
	(@pred_mulh<v_su><mode>_scalar): Ditto.
	(*pred_mulh<v_su><mode>_scalar): Ditto.
	(*pred_mulh<v_su><mode>_extended_scalar): Ditto.

2023-02-12  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/iterators.md: Add sign_extend/zero_extend.
	* config/riscv/riscv-vector-builtins-bases.cc (class ext): New class.
	(BASE): Ditto.
	* config/riscv/riscv-vector-builtins-bases.h: Add vsext/vzext support.
	* config/riscv/riscv-vector-builtins-functions.def (vsext): New macro
	define.
	(vzext): Ditto.
	* config/riscv/riscv-vector-builtins-shapes.cc (struct alu_def): Adjust
	for vsext/vzext support.
	* config/riscv/riscv-vector-builtins-types.def (DEF_RVV_WEXTI_OPS): New
	macro define.
	(DEF_RVV_QEXTI_OPS): Ditto.
	(DEF_RVV_OEXTI_OPS): Ditto.
	(DEF_RVV_WEXTU_OPS): Ditto.
	(DEF_RVV_QEXTU_OPS): Ditto.
	(DEF_RVV_OEXTU_OPS): Ditto.
	(vint16mf4_t): Ditto.
	(vint16mf2_t): Ditto.
	(vint16m1_t): Ditto.
	(vint16m2_t): Ditto.
	(vint16m4_t): Ditto.
	(vint16m8_t): Ditto.
	(vint32mf2_t): Ditto.
	(vint32m1_t): Ditto.
	(vint32m2_t): Ditto.
	(vint32m4_t): Ditto.
	(vint32m8_t): Ditto.
	(vint64m1_t): Ditto.
	(vint64m2_t): Ditto.
	(vint64m4_t): Ditto.
	(vint64m8_t): Ditto.
	(vuint16mf4_t): Ditto.
	(vuint16mf2_t): Ditto.
	(vuint16m1_t): Ditto.
	(vuint16m2_t): Ditto.
	(vuint16m4_t): Ditto.
	(vuint16m8_t): Ditto.
	(vuint32mf2_t): Ditto.
	(vuint32m1_t): Ditto.
	(vuint32m2_t): Ditto.
	(vuint32m4_t): Ditto.
	(vuint32m8_t): Ditto.
	(vuint64m1_t): Ditto.
	(vuint64m2_t): Ditto.
	(vuint64m4_t): Ditto.
	(vuint64m8_t): Ditto.
	* config/riscv/riscv-vector-builtins.cc (DEF_RVV_WEXTI_OPS): Ditto.
	(DEF_RVV_QEXTI_OPS): Ditto.
	(DEF_RVV_OEXTI_OPS): Ditto.
	(DEF_RVV_WEXTU_OPS): Ditto.
	(DEF_RVV_QEXTU_OPS): Ditto.
	(DEF_RVV_OEXTU_OPS): Ditto.
	(rvv_arg_type_info::get_base_vector_type): Add sign_exted/zero_extend
	support.
	(rvv_arg_type_info::get_tree_type): Ditto.
	* config/riscv/riscv-vector-builtins.h (enum rvv_base_type): Ditto.
	* config/riscv/vector-iterators.md (z): New attribute.
	* config/riscv/vector.md (@pred_<optab><mode>_vf2): New pattern.
	(@pred_<optab><mode>_vf4): Ditto.
	(@pred_<optab><mode>_vf8): Ditto.

2023-02-12  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/iterators.md: Add saturating Addition && Subtraction.
	* config/riscv/riscv-v.cc (has_vi_variant_p): Ditto.
	* config/riscv/riscv-vector-builtins-bases.cc (BASE): Ditto.
	* config/riscv/riscv-vector-builtins-bases.h: Ditto.
	* config/riscv/riscv-vector-builtins-functions.def (vsadd): New def.
	(vssub): Ditto.
	(vsaddu): Ditto.
	(vssubu): Ditto.
	* config/riscv/vector-iterators.md (sll.vi): Adjust for Saturating
	support.
	(sll.vv): Ditto.
	(%3,%v4): Ditto.
	(%3,%4): Ditto.
	* config/riscv/vector.md (@pred_<optab><mode>): New pattern.
	(@pred_<optab><mode>_scalar): New pattern.
	(*pred_<optab><mode>_scalar): New pattern.
	(*pred_<optab><mode>_extended_scalar): New pattern.

2023-02-12  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/iterators.md: Add neg and not.
	* config/riscv/riscv-vector-builtins-bases.cc (class unop): New class.
	(BASE): Ditto.
	* config/riscv/riscv-vector-builtins-bases.h: Ditto.
	* config/riscv/riscv-vector-builtins-functions.def (vadd): Rename binop
	into alu.
	(vsub): Ditto.
	(vand): Ditto.
	(vor): Ditto.
	(vxor): Ditto.
	(vsll): Ditto.
	(vsra): Ditto.
	(vsrl): Ditto.
	(vmin): Ditto.
	(vmax): Ditto.
	(vminu): Ditto.
	(vmaxu): Ditto.
	(vmul): Ditto.
	(vdiv): Ditto.
	(vrem): Ditto.
	(vdivu): Ditto.
	(vremu): Ditto.
	(vrsub): Ditto.
	(vneg): Ditto.
	(vnot): Ditto.
	* config/riscv/riscv-vector-builtins-shapes.cc (struct binop_def): Ditto.
	(struct alu_def): Ditto.
	(SHAPE): Ditto.
	* config/riscv/riscv-vector-builtins-shapes.h: Ditto.
	* config/riscv/riscv-vector-builtins.cc: Support unary C/C/++.
	* config/riscv/vector-iterators.md: New iterator.
	* config/riscv/vector.md (@pred_<optab><mode>): New pattern

2023-02-12  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vsetvl.cc (pass_vsetvl::compute_probabilities): Skip exit block.

2023-02-11  Jakub Jelinek  <jakub@redhat.com>

	PR ipa/108605
	* ipa-cp.cc (ipa_agg_value_from_jfunc): Return NULL_TREE also if
	item->offset bit position is too large to be representable as
	unsigned int byte position.

2023-02-11  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/extend.texi (Other Builtins): Adjust link to WG14 N965.

2023-02-10  Vladimir N. Makarov  <vmakarov@redhat.com>

	* ira.cc (update_equiv_regs): Set up ira_reg_equiv for
	valid_combine only when ira_use_lra_p is true.

2023-02-10  Vladimir N. Makarov  <vmakarov@redhat.com>

	* params.opt (ira-simple-lra-insn-threshold): Add new param.
	* ira.cc (ira): Use the param to switch on simple LRA.

2023-02-10  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/108687
	* gimple-range-cache.cc (ranger_cache::range_on_edge): Revert
	back to RFD_NONE mode for calculations.
	(ranger_cache::propagate_cache): Call the internal edge range API
	with RFD_READ_ONLY instead of changing the external routine.

2023-02-10  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/108520
	* gimple-range-infer.cc (check_assume_func): Invoke
	gimple_range_global directly instead using global_range_query.
	* value-query.cc (get_range_global): Add function context and
	avoid calling nonnull_arg_p if not cfun.
	(gimple_range_global): Add function context pointer.
	* value-query.h (imple_range_global): Add function context.

2023-02-10  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/constraints.md (Wdm): Adjust constraint.
	(Wbr): New constraint.
	* config/riscv/predicates.md (reg_or_int_operand): New predicate.
	* config/riscv/riscv-protos.h (emit_pred_op): Remove function.
	(emit_vlmax_op): New function.
	(emit_nonvlmax_op): Ditto.
	(simm32_p): Ditto.
	(neg_simm5_p): Ditto.
	(has_vi_variant_p): Ditto.
	* config/riscv/riscv-v.cc (emit_pred_op): Adjust function.
	(emit_vlmax_op): New function.
	(emit_nonvlmax_op): Ditto.
	(expand_const_vector): Adjust function.
	(legitimize_move): Ditto.
	(simm32_p): New function.
	(simm5_p): Ditto.
	(neg_simm5_p): Ditto.
	(has_vi_variant_p): Ditto.
	* config/riscv/riscv-vector-builtins-bases.cc (class vrsub): New class.
	(BASE): Ditto.
	* config/riscv/riscv-vector-builtins-bases.h: Ditto.
	* config/riscv/riscv-vector-builtins-functions.def (vmin): Remove
	unsigned cases.
	(vmax): Ditto.
	(vminu): Remove signed cases.
	(vmaxu): Ditto.
	(vdiv): Remove unsigned cases.
	(vrem): Ditto.
	(vdivu): Remove signed cases.
	(vremu): Ditto.
	(vadd): Adjust.
	(vsub): Ditto.
	(vrsub): New class.
	(vand): Adjust.
	(vor): Ditto.
	(vxor): Ditto.
	(vmul): Ditto.
	* config/riscv/riscv-vector-builtins.cc (DEF_RVV_U_OPS): New macro.
	* config/riscv/riscv.h: change VL/VTYPE as fixed reg.
	* config/riscv/vector-iterators.md: New iterators.
	* config/riscv/vector.md (@pred_broadcast<mode>): Adjust pattern for vx
	support.
	(@pred_<optab><mode>_scalar): New pattern.
	(@pred_sub<mode>_reverse_scalar): Ditto.
	(*pred_<optab><mode>_scalar): Ditto.
	(*pred_<optab><mode>_extended_scalar): Ditto.
	(*pred_sub<mode>_reverse_scalar): Ditto.
	(*pred_sub<mode>_extended_reverse_scalar): Ditto.

2023-02-10  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/108724
	* tree-vect-stmts.cc (vectorizable_operation): Avoid
	using word_mode vectors when vector lowering will
	decompose them to elementwise operations.

2023-02-10  Jakub Jelinek  <jakub@redhat.com>

	Revert:
	2023-02-09  Martin Liska  <mliska@suse.cz>

	PR target/100758
	* doc/extend.texi: Document that the function
	does not work correctly for old VIA processors.

2023-02-10  Andrew Pinski  <apinski@marvell.com>
	    Andrew Macleod   <amacleod@redhat.com>

	PR tree-optimization/108684
	* tree-ssa-dce.cc (simple_dce_from_worklist):
	Check all ssa names and not just non-vdef ones
	before accepting the inline-asm.
	Call unlink_stmt_vdef on the statement before
	removing it.

2023-02-09  Vladimir N. Makarov  <vmakarov@redhat.com>

	* ira.h (struct ira_reg_equiv_s): Add new field caller_save_p.
	* ira.cc (validate_equiv_mem): Check memref address variance.
	(no_equiv): Clear caller_save_p flag.
	(update_equiv_regs): Define caller save equivalence for
	valid_combine.
	(setup_reg_equiv): Clear defined_p flag for caller save equivalence.
	* lra-constraints.cc (lra_copy_reg_equiv): Add new arg
	call_save_p.  Use caller save equivalence depending on the arg.
	(split_reg): Adjust the call.

2023-02-09  Jakub Jelinek  <jakub@redhat.com>

	PR target/100758
	* common/config/i386/cpuinfo.h (get_zhaoxin_cpu): Formatting fixes.
	(cpu_indicator_init): Call get_available_features for all CPUs with
	max_level >= 1, rather than just Intel, AMD or Zhaoxin.  Formatting
	fixes.

2023-02-09  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/108688
	* match.pd (bit_field_ref [bit_insert]): Simplify BIT_FIELD_REF
	of BIT_INSERT_EXPR extracting exactly all inserted bits even
	when without mode precision.  Formatting fixes.

2023-02-09  Andrew Pinski  <apinski@marvell.com>

	PR tree-optimization/108688
	* match.pd (bit_field_ref [bit_insert]): Avoid generating
	BIT_FIELD_REFs of non-mode-precision integral operands.

2023-02-09  Martin Liska  <mliska@suse.cz>

	PR target/100758
	* doc/extend.texi: Document that the function
	does not work correctly for old VIA processors.

2023-02-09  Andreas Schwab  <schwab@suse.de>

	* lto-wrapper.cc (merge_and_complain): Handle
	-funwind-tables and -fasynchronous-unwind-tables.
	(append_compiler_options): Likewise.

2023-02-09  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/26854
	* tree-into-ssa.cc (update_ssa): Turn blocks_to_update to tree
	view around insert_updated_phi_nodes_for.
	* tree-ssa-alias.cc (maybe_skip_until): Allocate visited bitmap
	in tree view.
	(walk_aliased_vdefs_1): Likewise.

2023-02-08  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/include/gpl_v3.texi: Change fsf.org to www.fsf.org.

2023-02-08  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	PR target/108505
	* config.gcc (tm_mlib_file): Define new variable.

2023-02-08  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/108692
	* tree-vect-patterns.cc (vect_widened_op_tree): If rhs_code is
	widened_code which is different from code, don't call
	vect_look_through_possible_promotion but instead just check op is
	SSA_NAME with integral type for which vect_is_simple_use is true
	and call set_op on this_unprom.

2023-02-08  Andrea Corallo  <andrea.corallo@arm.com>

	* config/aarch64/aarch64-protos.h (aarch_ra_sign_key): Remove
	declaration.
	* config/aarch64/aarch64.cc (aarch_ra_sign_key): Remove
	definition.
	* config/aarch64/aarch64.opt (aarch64_ra_sign_key): Rename
	to 'aarch_ra_sign_key'.
	* config/arm/aarch-common.cc (aarch_ra_sign_key): Remove
	declaration.
	* config/arm/arm-protos.h (aarch_ra_sign_key): Likewise.
	* config/arm/arm.cc (enum aarch_key_type): Remove definition.
	* config/arm/arm.opt: Define.

2023-02-08  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/108316
	* tree-vect-stmts.cc (get_load_store_type): When using
	internal functions for gather/scatter, make sure that the type
	of the offset argument is consistent with the offset vector type.

2023-02-08  Vladimir N. Makarov  <vmakarov@redhat.com>

	Revert:
	2023-02-07  Vladimir N. Makarov  <vmakarov@redhat.com>

	* ira.h (struct ira_reg_equiv_s): Add new field caller_save_p.
	* ira.cc (validate_equiv_mem): Check memref address variance.
	(update_equiv_regs): Define caller save equivalence for
	valid_combine.
	(setup_reg_equiv): Clear defined_p flag for caller save equivalence.
	* lra-constraints.cc (lra_copy_reg_equiv): Add new arg
	call_save_p.  Use caller save equivalence depending on the arg.
	(split_reg): Adjust the call.

2023-02-08  Jakub Jelinek  <jakub@redhat.com>

	* tree.def (SAD_EXPR): Remove outdated comment about missing
	WIDEN_MINUS_EXPR.

2023-02-07  Marek Polacek  <polacek@redhat.com>

	* doc/invoke.texi: Update -fchar8_t documentation.

2023-02-07  Vladimir N. Makarov  <vmakarov@redhat.com>

	* ira.h (struct ira_reg_equiv_s): Add new field caller_save_p.
	* ira.cc (validate_equiv_mem): Check memref address variance.
	(update_equiv_regs): Define caller save equivalence for
	valid_combine.
	(setup_reg_equiv): Clear defined_p flag for caller save equivalence.
	* lra-constraints.cc (lra_copy_reg_equiv): Add new arg
	call_save_p.  Use caller save equivalence depending on the arg.
	(split_reg): Adjust the call.

2023-02-07  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/26854
	* gimple-fold.cc (has_use_on_stmt): Look at stmt operands
	instead of immediate uses.

2023-02-07  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/106923
	* ipa-split.cc (execute_split_functions): Don't split returns_twice
	functions.

2023-02-07  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/106433
	* cgraph.cc (set_const_flag_1): Recurse on simd clones too.
	(cgraph_node::set_pure_flag): Call set_pure_flag_1 on simd clones too.

2023-02-07  Jan Hubicka  <jh@suse.cz>

	* config/i386/x86-tune.def (X86_TUNE_AVX256_OPTIMAL): Turn off
	for znver4.

2023-02-06  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/mkoffload.cc (gcn_stack_size): New global variable.
	(process_asm): Create a constructor for GCN_STACK_SIZE.
	(main): Parse the -mstack-size option.

2023-02-06  Alex Coplan  <alex.coplan@arm.com>

	PR target/104921
	* config/aarch64/aarch64-simd.md (aarch64_bfmlal<bt>_lane<q>v4sf):
	Use correct constraint for operand 3.

2023-02-06  Martin Jambor  <mjambor@suse.cz>

	* ipa-sra.cc (adjust_parameter_descriptions): Fix a typo in a dump.

2023-02-06  Xi Ruoyao  <xry111@xry111.site>

	* config/loongarch/loongarch.md (bytepick_w_ashift_amount):
	New define_int_iterator.
	(bytepick_d_ashift_amount): Likewise.
	(bytepick_imm): New define_int_attr.
	(bytepick_w_lshiftrt_amount): Likewise.
	(bytepick_d_lshiftrt_amount): Likewise.
	(bytepick_w_<bytepick_imm>): New define_insn template.
	(bytepick_w_<bytepick_imm>_extend): Likewise.
	(bytepick_d_<bytepick_imm>): Likewise.
	(bytepick_w): Remove unused define_insn.
	(bytepick_d): Likewise.
	(UNSPEC_BYTEPICK_W): Remove unused unspec.
	(UNSPEC_BYTEPICK_D): Likewise.
	* config/loongarch/predicates.md (const_0_to_3_operand):
	Remove unused define_predicate.
	(const_0_to_7_operand): Likewise.

2023-02-06  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/108655
	* ubsan.cc (sanitize_unreachable_fn): For -funreachable-traps
	or -fsanitize=unreachable -fsanitize-trap=unreachable return
	BUILT_IN_UNREACHABLE_TRAP decl rather than BUILT_IN_TRAP.

2023-02-05  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/install.texi (Specific): Remove PW32.

2023-02-03  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/108647
	* range-op.cc (operator_equal::op1_range,
	operator_not_equal::op1_range): Don't test op2 bound
	equality if op2.undefined_p (), instead set_varying.
	(operator_lt::op1_range, operator_le::op1_range,
	operator_gt::op1_range, operator_ge::op1_range): Return false if
	op2.undefined_p ().
	(operator_lt::op2_range, operator_le::op2_range,
	operator_gt::op2_range, operator_ge::op2_range): Return false if
	op1.undefined_p ().

2023-02-03  Aldy Hernandez  <aldyh@redhat.com>

	PR tree-optimization/108639
	* value-range.cc (irange::legacy_equal_p): Compare nonzero bits as
	widest_int.
	(irange::operator==): Same.

2023-02-03  Aldy Hernandez  <aldyh@redhat.com>

	PR tree-optimization/108647
	* range-op-float.cc (foperator_lt::op1_range): Handle undefined ranges.
	(foperator_lt::op2_range): Same.
	(foperator_le::op1_range): Same.
	(foperator_le::op2_range): Same.
	(foperator_gt::op1_range): Same.
	(foperator_gt::op2_range): Same.
	(foperator_ge::op1_range): Same.
	(foperator_ge::op2_range): Same.
	(foperator_unordered_lt::op1_range): Same.
	(foperator_unordered_lt::op2_range): Same.
	(foperator_unordered_le::op1_range): Same.
	(foperator_unordered_le::op2_range): Same.
	(foperator_unordered_gt::op1_range): Same.
	(foperator_unordered_gt::op2_range): Same.
	(foperator_unordered_ge::op1_range): Same.
	(foperator_unordered_ge::op2_range): Same.

2023-02-03  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/107570
	* tree-vrp.cc (remove_and_update_globals): Reset SCEV.

2023-02-03  Gaius Mulley  <gaiusmod2@gmail.com>

	* doc/gm2.texi (Internals): Remove from menu.
	(Using): Comment out ifnohtml conditional.
	(Documentation): Use gcc url.
	(License): Node simplified.
	(Copying): New node.  Include gpl_v3_without_node.
	(Contributing): Node simplified.
	(Internals): Commented out.
	(Libraries): Node simplified.
	(Indices): Ditto.
	(Contents): Ditto.
	(Functions): Ditto.

2023-02-03  Christophe Lyon  <christophe.lyon@arm.com>

	* config/arm/mve.md (mve_vabavq_p_<supf><mode>): Add length
	attribute.
	(mve_vqshluq_m_n_s<mode>): Likewise.
	(mve_vshlq_m_<supf><mode>): Likewise.
	(mve_vsriq_m_n_<supf><mode>): Likewise.
	(mve_vsubq_m_<supf><mode>): Likewise.

2023-02-03  Martin Jambor  <mjambor@suse.cz>

	PR ipa/108384
	* ipa-sra.cc (push_param_adjustments_for_index): Remove a size check
	when comparing to an IPA-CP value.
	(dump_list_of_param_indices): New function.
	(adjust_parameter_descriptions): Check for mismatching IPA-CP values.
	Dump removed candidates using dump_list_of_param_indices.
	* ipa-param-manipulation.cc
	(ipa_param_body_adjustments::modify_expression): Add assert checking
	sizes of a VIEW_CONVERT_EXPR will match.
	(ipa_param_body_adjustments::modify_assignment): Likewise.

2023-02-03  Monk Chiang  <monk.chiang@sifive.com>

	* config/riscv/riscv.h: Remove VL_REGS, VTYPE_REGS class.
	* config/riscv/riscv.cc: Ditto.

2023-02-03  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/vector-iterators.md (sll.vi): Fix constraint bug.
	(sll.vv): Ditto.
	(%3,%4): Ditto.
	(%3,%v4): Ditto.
	* config/riscv/vector.md: Ditto.

2023-02-03  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/predicates.md (pmode_reg_or_uimm5_operand): New predicate.
	* config/riscv/riscv-vector-builtins-bases.cc: New class.
	* config/riscv/riscv-vector-builtins-functions.def (vsll): Ditto.
	(vsra): Ditto.
	(vsrl): Ditto.
	* config/riscv/riscv-vector-builtins.cc: Ditto.
	* config/riscv/vector.md (@pred_<optab><mode>_scalar): New pattern.

2023-02-02  Iain Sandoe  <iain@sandoe.co.uk>

	* toplev.cc (toplev::main): Only print the version information header
	from toplevel main().

2023-02-02  Paul-Antoine Arras  <pa@codesourcery.com>

	* config/gcn/gcn-valu.md (cond_<expander><mode>): Add
	cond_{ashl|ashr|lshr}

2023-02-02  Richard Sandiford  <richard.sandiford@arm.com>

	PR rtl-optimization/108086
	* rtl-ssa/insns.h (insn_info): Make m_num_defs a full unsigned int.
	Adjust size-related commentary accordingly.

2023-02-02  Richard Sandiford  <richard.sandiford@arm.com>

	PR rtl-optimization/108508
	* rtl-ssa/accesses.cc (function_info::split_clobber_group): When
	the splay tree search gives the first clobber in the second group,
	make sure that the root of the first clobber group is updated
	correctly.  Enter the new clobber group into the definition splay
	tree.

2023-02-02  Jin Ma  <jinma@linux.alibaba.com>

	* common/config/riscv/riscv-common.cc (riscv_compute_multilib):
	Fix finding best match score.

2023-02-02  Jakub Jelinek  <jakub@redhat.com>

	PR debug/106746
	PR rtl-optimization/108463
	PR target/108484
	* cselib.cc (cselib_current_insn): Move declaration earlier.
	(cselib_hasher::equal): For debug only locs, temporarily override
	cselib_current_insn to their l->setting_insn for the
	rtx_equal_for_cselib_1 call, so that unsuccessful comparisons don't
	promote some debug locs.
	* sched-deps.cc (sched_analyze_2) <case MEM>: For MEMs in DEBUG_INSNs
	when using cselib call cselib_lookup_from_insn on the address but
	don't substitute it.

2023-02-02  Richard Biener  <rguenther@suse.de>

	PR middle-end/108625
	* genmatch.cc (expr::gen_transform): Also disallow resimplification
	from pushing to lseq with force_leaf.
	(dt_simplify::gen_1): Likewise.

2023-02-02  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-run.cc: Include libgomp-gcn.h.
	(struct kernargs): Replace the common content with kernargs_abi.
	(struct heap): Delete.
	(main): Read GCN_STACK_SIZE envvar.
	Allocate space for the device stacks.
	Write the new kernargs fields.
	* config/gcn/gcn.cc (gcn_option_override): Remove stack_size_opt.
	(default_requested_args): Remove PRIVATE_SEGMENT_BUFFER_ARG and
	PRIVATE_SEGMENT_WAVE_OFFSET_ARG.
	(gcn_addr_space_convert): Mask the QUEUE_PTR_ARG content.
	(gcn_expand_prologue): Move the TARGET_PACKED_WORK_ITEMS to the top.
	Set up the stacks from the values in the kernargs, not private.
	(gcn_expand_builtin_1): Match the stack configuration in the prologue.
	(gcn_hsa_declare_function_name): Turn off the private segment.
	(gcn_conditional_register_usage): Ensure QUEUE_PTR is fixed.
	* config/gcn/gcn.h (FIXED_REGISTERS): Fix the QUEUE_PTR register.
	* config/gcn/gcn.opt (mstack-size): Change the description.

2023-02-02  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	PR target/108443
	* config/arm/arm.h (VALID_MVE_PRED_MODE): Add V2QI.
	* config/arm/arm.cc (thumb2_legitimate_address_p): Use HImode for
	addressing MVE predicate modes.
	(mve_bool_vec_to_const): Change to represent correct MVE predicate
	format.
	(arm_hard_regno_mode_ok): Use VALID_MVE_PRED_MODE instead of checking
	modes.
	(arm_vector_mode_supported_p): Likewise.
	(arm_mode_to_pred_mode): Add V2QI.
	* config/arm/arm-builtins.cc (UNOP_PRED_UNONE_QUALIFIERS): New
	qualifier.
	(UNOP_PRED_PRED_QUALIFIERS): New qualifier
	(BINOP_PRED_UNONE_PRED_QUALIFIERS): New qualifier.
	(v2qi_UP): New macro.
	(v4bi_UP): New macro.
	(v8bi_UP): New macro.
	(v16bi_UP): New macro.
	(arm_expand_builtin_args): Make it able to expand the new predicate
	modes.
	* config/arm/arm-modes.def (V2QI): New mode.
	* config/arm/arm-simd-builtin-types.def (Pred1x16_t, Pred2x8_t
	Pred4x4_t): Remove unused predicate builtin types.
	* config/arm/arm_mve.h (__arm_vctp16q, __arm_vctp32q, __arm_vctp64q,
	__arm_vctp8q, __arm_vpnot, __arm_vctp8q_m, __arm_vctp64q_m,
	__arm_vctp32q_m, __arm_vctp16q_m): Use predicate modes.
	* config/arm/arm_mve_builtins.def (vctp16q, vctp32q, vctp64q, vctp8q,
	vpnot, vctp8q_m, vctp16q_m, vctp32q_m, vctp64q_m): Likewise.
	* config/arm/constraints.md (DB): Check for VALID_MVE_PRED_MODE instead
	of MODE_VECTOR_BOOL.
	* config/arm/iterators.md (MVE_7, MVE_7_HI): Add V2QI
	(MVE_VPRED): Likewise.
	(MVE_vpred): Add V2QI and map upper case predicate modes to lower case.
	(MVE_vctp): New mode attribute.
	(mode1): Remove.
	(VCTPQ): Remove.
	(VCTPQ_M): Remove.
	* config/arm/mve.md (mve_vctp<mode1>qhi): Rename this...
	(mve_vctp<MVE_vctp>q<MVE_vpred>): ... to this. And use new mode
	attributes.
	(mve_vpnothi): Rename this...
	(mve_vpnotv16bi): ... to this.
	(mve_vctp<mode1>q_mhi): Rename this...
	(mve_vctp<MVE_vctp>q_m<MVE_vpred>):... to this.
	(mve_vldrdq_gather_base_z_<supf>v2di,
	mve_vldrdq_gather_offset_z_<supf>v2di,
	mve_vldrdq_gather_shifted_offset_z_<supf>v2di,
	mve_vstrdq_scatter_base_p_<supf>v2di,
	mve_vstrdq_scatter_offset_p_<supf>v2di,
	mve_vstrdq_scatter_offset_p_<supf>v2di_insn,
	mve_vstrdq_scatter_shifted_offset_p_<supf>v2di,
	mve_vstrdq_scatter_shifted_offset_p_<supf>v2di_insn,
	mve_vstrdq_scatter_base_wb_p_<supf>v2di,
	mve_vldrdq_gather_base_wb_z_<supf>v2di,
	mve_vldrdq_gather_base_nowb_z_<supf>v2di,
	mve_vldrdq_gather_base_wb_z_<supf>v2di_insn):  Use V2QI insead of HI for
	predicates.
	* config/arm/unspecs.md (VCTP8Q, VCTP16Q, VCTP32Q, VCTP64Q): Replace
	these...
	(VCTP): ... with this.
	(VCTP8Q_M, VCTP16Q_M, VCTP32Q_M, VCTP64Q_M): Replace these...
	(VCTP_M): ... with this.
	* config/arm/vfp.md (*thumb2_movhi_vfp, *thumb2_movhi_fp16): Use
	VALID_MVE_PRED_MODE instead of checking for MODE_VECTOR_BOOL class.

2023-02-02  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	PR target/107674
	* config/arm/arm.cc (arm_hard_regno_mode_ok): Use new MACRO.
	(arm_modes_tieable_p): Make MVE predicate modes tieable.
	* config/arm/arm.h (VALID_MVE_PRED_MODE):  New define.
	* simplify-rtx.cc (simplify_context::simplify_subreg): Teach
	simplify_subreg to simplify subregs where the outermode is not scalar.

2023-02-02  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	PR target/107674
	* config/arm/arm-builtins.cc (arm_simd_builtin_type): Rewrite to use
	new qualifiers parameter and use unsigned short type for MVE predicate.
	(arm_init_builtin): Call arm_simd_builtin_type with qualifiers
	parameter.
	(arm_init_crypto_builtins): Likewise.

2023-02-02  Jakub Jelinek  <jakub@redhat.com>

	PR ipa/107300
	* builtins.def (BUILT_IN_UNREACHABLE_TRAP): New builtin.
	* internal-fn.def (TRAP): Remove.
	* internal-fn.cc (expand_TRAP): Remove.
	* tree.cc (build_common_builtin_nodes): Define
	BUILT_IN_UNREACHABLE_TRAP if not yet defined.
	(builtin_decl_unreachable): Use BUILT_IN_UNREACHABLE_TRAP
	instead of BUILT_IN_TRAP.
	* gimple.cc (gimple_build_builtin_unreachable): Remove
	emitting internal function for BUILT_IN_TRAP.
	* asan.cc (maybe_instrument_call): Handle BUILT_IN_UNREACHABLE_TRAP.
	* cgraph.cc (cgraph_edge::verify_corresponds_to_fndecl): Handle
	BUILT_IN_UNREACHABLE_TRAP instead of BUILT_IN_TRAP.
	* ipa-devirt.cc (possible_polymorphic_call_target_p): Handle
	BUILT_IN_UNREACHABLE_TRAP.
	* builtins.cc (expand_builtin, is_inexpensive_builtin): Likewise.
	* tree-cfg.cc (verify_gimple_call,
	pass_warn_function_return::execute): Likewise.
	* attribs.cc (decl_attributes): Don't report exclusions on
	BUILT_IN_UNREACHABLE_TRAP either.

2023-02-02  liuhongt  <hongtao.liu@intel.com>

	PR tree-optimization/108601
	* tree-vectorizer.h (vect_can_peel_nonlinear_iv_p): Removed.
	* tree-vect-loop.cc
	(vectorizable_nonlinear_induction): Remove
	vect_can_peel_nonlinear_iv_p.
	(vect_can_peel_nonlinear_iv_p): Don't peel
	nonlinear iv(mult or shift) for epilog when vf is not
	constant and moved the defination to ..
	* tree-vect-loop-manip.cc (vect_can_peel_nonlinear_iv_p):
	.. Here.

2023-02-02  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/108435
	* tree-nested.cc (convert_nonlocal_omp_clauses)
	<case OMP_CLAUSE_LASTPRIVATE>: If info->new_local_var_chain and *seq
	is not a GIMPLE_BIND, wrap the sequence into a new GIMPLE_BIND
	before calling declare_vars.
	(convert_nonlocal_omp_clauses) <case OMP_CLAUSE_LINEAR>: Merge
	with the OMP_CLAUSE_LASTPRIVATE handling except for whether
	seq is initialized to &OMP_CLAUSE_LASTPRIVATE_GIMPLE_SEQ (clause)
	or &OMP_CLAUSE_LINEAR_GIMPLE_SEQ (clause).

2023-02-01  Tamar Christina  <tamar.christina@arm.com>

	* common/config/aarch64/aarch64-common.cc
	(struct aarch64_option_extension): Add native_detect and document struct
	a bit more.
	(all_extensions): Set new field native_detect.
	* config/aarch64/aarch64.cc (struct aarch64_option_extension): Delete
	unused struct.

2023-02-01  Martin Liska  <mliska@suse.cz>

	* ipa-devirt.cc (odr_types_equivalent_p): Respect *warned
	value if set.

2023-02-01  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/108356
	* gimple-range-cache.cc (ranger_cache::range_on_edge): Always
	do a search of the DOM tree for a range.

2023-02-01  Martin Liska  <mliska@suse.cz>

	PR ipa/108509
	* cgraphunit.cc (walk_polymorphic_call_targets): Insert
	ony non-null values.
	* ipa.cc (walk_polymorphic_call_targets): Likewise.

2023-02-01  Martin Liska  <mliska@suse.cz>

	PR driver/108572
	* gcc.cc (LINK_COMPRESS_DEBUG_SPEC): Report error only for
	-gz=zstd.

2023-02-01  Jakub Jelinek  <jakub@redhat.com>

	PR debug/108573
	* ree.cc (combine_reaching_defs): Don't return false for paradoxical
	subregs in DEBUG_INSNs.

2023-02-01  Richard Sandiford  <richard.sandiford@arm.com>

	* compare-elim.cc (find_flags_uses_in_insn): Guard use of SET_SRC.

2023-02-01  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.cc (s390_restore_gpr_p): New function.
	(s390_preserve_gpr_arg_in_range_p): New function.
	(s390_preserve_gpr_arg_p): New function.
	(s390_preserve_fpr_arg_p): New function.
	(s390_register_info_stdarg_fpr): Rename to ...
	(s390_register_info_arg_fpr): ... this. Add -mpreserve-args handling.
	(s390_register_info_stdarg_gpr): Rename to ...
	(s390_register_info_arg_gpr): ... this. Add -mpreserve-args handling.
	(s390_register_info): Use the renamed functions above.
	(s390_optimize_register_info): Likewise.
	(save_fpr): Generate CFI for -mpreserve-args.
	(save_gprs): Generate CFI for -mpreserve-args. Drop return value.
	(s390_emit_prologue): Adjust to changed calling convention of save_gprs.
	(s390_optimize_prologue): Likewise.
	* config/s390/s390.opt: New option -mpreserve-args

2023-02-01  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.cc (save_gprs): Use gen_frame_mem.
	(restore_gprs): Likewise.
	(s390_emit_stack_tie): Make the stack_tie to be dependent on the
	frame pointer if a frame-pointer is used.
	(s390_emit_prologue): Emit stack_tie when frame-pointer is needed.
	* config/s390/s390.md (stack_tie): Add a register operand and
	rename to ...
	(@stack_tie<mode>): ... this.

2023-02-01  Andreas Krebbel  <krebbel@linux.ibm.com>

	* dwarf2cfi.cc (dwarf2out_frame_debug_cfa_restore): Add
	EMIT_CFI parameter.
	(dwarf2out_frame_debug): Add case for REG_CFA_NORESTORE.
	* reg-notes.def (REG_CFA_NOTE): New reg note definition.

2023-02-01  Richard Biener  <rguenther@suse.de>

	PR middle-end/108500
	* dominance.cc (assign_dfs_numbers): Replace recursive DFS
	with tree traversal algorithm.

2023-02-01  Jason Merrill  <jason@redhat.com>

	* doc/invoke.texi: Document -Wno-changes-meaning.

2023-02-01  David Malcolm  <dmalcolm@redhat.com>

	* doc/invoke.texi (Static Analyzer Options): Add notes about
	limitations of -fanalyzer.

2023-01-31  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/constraints.md (vj): New.
	(vk): Ditto
	* config/riscv/iterators.md: Add more opcode.
	* config/riscv/predicates.md (vector_arith_operand): New.
	(vector_neg_arith_operand): New.
	(vector_shift_operand): New.
	* config/riscv/riscv-vector-builtins-bases.cc (class binop): New.
	* config/riscv/riscv-vector-builtins-bases.h: (vadd): New.
	(vsub): Ditto.
	(vand): Ditto.
	(vor): Ditto.
	(vxor): Ditto.
	(vsll): Ditto.
	(vsra): Ditto.
	(vsrl): Ditto.
	(vmin): Ditto.
	(vmax): Ditto.
	(vminu): Ditto.
	(vmaxu): Ditto.
	(vmul): Ditto.
	(vdiv): Ditto.
	(vrem): Ditto.
	(vdivu): Ditto.
	(vremu): Ditto.
	* config/riscv/riscv-vector-builtins-functions.def (vadd): New.
	(vsub): Ditto.
	(vand): Ditto.
	(vor): Ditto.
	(vxor): Ditto.
	(vsll): Ditto.
	(vsra): Ditto.
	(vsrl): Ditto.
	(vmin): Ditto.
	(vmax): Ditto.
	(vminu): Ditto.
	(vmaxu): Ditto.
	(vmul): Ditto.
	(vdiv): Ditto.
	(vrem): Ditto.
	(vdivu): Ditto.
	(vremu): Ditto.
	* config/riscv/riscv-vector-builtins-shapes.cc (struct binop_def): New.
	* config/riscv/riscv-vector-builtins-shapes.h (binop): New.
	* config/riscv/riscv-vector-builtins.cc (DEF_RVV_I_OPS): New.
	(DEF_RVV_U_OPS): New.
	(rvv_arg_type_info::get_base_vector_type): Handle
	RVV_BASE_shift_vector.
	(rvv_arg_type_info::get_tree_type): Ditto.
	* config/riscv/riscv-vector-builtins.h (enum rvv_base_type): Add
	RVV_BASE_shift_vector.
	* config/riscv/riscv.cc (riscv_print_operand): Handle 'V'.
	* config/riscv/vector-iterators.md: Handle more opcode.
	* config/riscv/vector.md (@pred_<optab><mode>): New.

2023-01-31  Philipp Tomsich  <philipp.tomsich@vrull.eu>

	PR target/108589
	* config/aarch64/aarch64.cc (aarch_macro_fusion_pair_p): Check
	REG_P on SET_DEST.

2023-01-31  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/108608
	* tree-vect-loop.cc (vect_transform_reduction): Handle single
	def-use cycles that involve function calls rather than tree codes.

2023-01-31  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/108385
	* gimple-range-gori.cc (gori_compute::compute_operand_range):
	Allow VARYING computations to continue if there is a relation.
	* range-op.cc (pointer_plus_operator::op2_range): New.

2023-01-31  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/108359
	* range-op.cc (range_operator::wi_fold_in_parts_equiv): New.
	(range_operator::fold_range): If op1 is equivalent to op2 then
	invoke new fold_in_parts_equiv to operate on sub-components.
	* range-op.h (wi_fold_in_parts_equiv): New prototype.

2023-01-31  Andrew MacLeod  <amacleod@redhat.com>

	* gimple-range-gori.cc (gori_compute::compute_operand_range): Do
	not abort calculations if there is a valid relation available.
	(gori_compute::refine_using_relation): Pass correct relation trio.
	(gori_compute::compute_operand1_range): Create trio and use it.
	(gori_compute::compute_operand2_range): Ditto.
	* range-op.cc (operator_plus::op1_range): Use correct trio member.
	(operator_minus::op1_range): Use correct trio member.
	* value-relation.cc (value_relation::create_trio): New.
	* value-relation.h (value_relation::create_trio): New prototype.

2023-01-31  Jakub Jelinek  <jakub@redhat.com>

	PR target/108599
	* config/i386/i386-expand.cc
	(ix86_convert_const_wide_int_to_broadcast): Return nullptr if
	CONST_WIDE_INT_NUNITS (op) times HOST_BITS_PER_WIDE_INT isn't
	equal to bitsize of mode.

2023-01-31  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/108596
	* bb-reorder.cc (fix_up_fall_thru_edges): Handle the case where cur_bb
	ends with asm goto and has a crossing fallthrough edge to the same bb
	that contains at least one of its labels by restoring EDGE_CROSSING
	flag even on possible edge from cur_bb to new_bb successor.

2023-01-31  Jakub Jelinek  <jakub@redhat.com>

	PR c++/105593
	* config/i386/avx512erintrin.h (_mm512_exp2a23_round_pd,
	_mm512_exp2a23_round_ps, _mm512_rcp28_round_pd, _mm512_rcp28_round_ps,
	_mm512_rsqrt28_round_pd, _mm512_rsqrt28_round_ps): Use
	_mm512_undefined_pd () or _mm512_undefined_ps () instead of using
	uninitialized automatic variable __W.

2023-01-31  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/include/fdl.texi: Change fsf.org to www.fsf.org.

2023-01-30  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-protos.h (get_vector_mode): New function.
	* config/riscv/riscv-v.cc (get_vector_mode): Ditto.
	* config/riscv/riscv-vector-builtins-bases.cc (enum lst_type): New enum.
	(class loadstore): Adjust for indexed loads/stores support.
	(BASE): Ditto.
	* config/riscv/riscv-vector-builtins-bases.h: New function declare.
	* config/riscv/riscv-vector-builtins-functions.def (vluxei8): Ditto.
	(vluxei16): Ditto.
	(vluxei32): Ditto.
	(vluxei64): Ditto.
	(vloxei8): Ditto.
	(vloxei16): Ditto.
	(vloxei32): Ditto.
	(vloxei64): Ditto.
	(vsuxei8): Ditto.
	(vsuxei16): Ditto.
	(vsuxei32): Ditto.
	(vsuxei64): Ditto.
	(vsoxei8): Ditto.
	(vsoxei16): Ditto.
	(vsoxei32): Ditto.
	(vsoxei64): Ditto.
	* config/riscv/riscv-vector-builtins-shapes.cc
	(struct indexed_loadstore_def): New class.
	(SHAPE): Ditto.
	* config/riscv/riscv-vector-builtins-shapes.h: Ditto.
	* config/riscv/riscv-vector-builtins.cc (required_extensions_p): Adjust
	for indexed loads/stores support.
	(check_required_extensions): Ditto.
	(rvv_arg_type_info::get_base_vector_type): New function.
	(rvv_arg_type_info::get_tree_type): Ditto.
	(function_builder::add_unique_function): Adjust for indexed loads/stores
	support.
	(function_expander::use_exact_insn): New function.
	* config/riscv/riscv-vector-builtins.h (enum rvv_base_type): Adjust for
	indexed loads/stores support.
	(struct rvv_arg_type_info): Ditto.
	(function_expander::index_mode): New function.
	(function_base::apply_tail_policy_p): Ditto.
	(function_base::apply_mask_policy_p): Ditto.
	* config/riscv/vector-iterators.md (unspec): New unspec.
	* config/riscv/vector.md (unspec): Ditto.
	(@pred_indexed_<order>load<VNX1_QHSD:mode><VNX1_QHSDI:mode>): New
	pattern.
	(@pred_indexed_<order>store<VNX1_QHSD:mode><VNX1_QHSDI:mode>): Ditto.
	(@pred_indexed_<order>load<VNX2_QHSD:mode><VNX2_QHSDI:mode>): Ditto.
	(@pred_indexed_<order>store<VNX2_QHSD:mode><VNX2_QHSDI:mode>): Ditto.
	(@pred_indexed_<order>load<VNX4_QHSD:mode><VNX4_QHSDI:mode>): Ditto.
	(@pred_indexed_<order>store<VNX4_QHSD:mode><VNX4_QHSDI:mode>): Ditto.
	(@pred_indexed_<order>load<VNX8_QHSD:mode><VNX8_QHSDI:mode>): Ditto.
	(@pred_indexed_<order>store<VNX8_QHSD:mode><VNX8_QHSDI:mode>): Ditto.
	(@pred_indexed_<order>load<VNX16_QHS:mode><VNX16_QHSI:mode>): Ditto.
	(@pred_indexed_<order>store<VNX16_QHS:mode><VNX16_QHSI:mode>): Ditto.
	(@pred_indexed_<order>load<VNX32_QH:mode><VNX32_QHI:mode>): Ditto.
	(@pred_indexed_<order>store<VNX32_QH:mode><VNX32_QHI:mode>): Ditto.
	(@pred_indexed_<order>load<VNX64_Q:mode><VNX64_Q:mode>): Ditto.
	(@pred_indexed_<order>store<VNX64_Q:mode><VNX64_Q:mode>): Ditto.

2023-01-30  Flavio Cruz  <flaviocruz@gmail.com>

	* config.gcc: Recognize x86_64-*-gnu* targets and include
	i386/gnu64.h.
	* config/i386/gnu64.h: Define configuration for new target
	including ld.so location.

2023-01-30  Philipp Tomsich  <philipp.tomsich@vrull.eu>

	* config/aarch64/aarch64-cores.def (AARCH64_CORE): Update
	ampere1a to include SM4.

2023-01-30  Andrew Pinski  <apinski@marvell.com>

	PR tree-optimization/108582
	* tree-ssa-phiopt.cc (match_simplify_replacement): Add check
	for middlebb to have no phi nodes.

2023-01-30  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/108574
	* tree-ssa-sccvn.cc (visit_phi): Instead of swapping
	sameval and def, ignore the equivalence if there's the
	danger of oscillating between two values.

2023-01-30  Andreas Schwab  <schwab@suse.de>

	* common/config/riscv/riscv-common.cc
	(riscv_option_optimization_table)
	[TARGET_DEFAULT_ASYNC_UNWIND_TABLES]: Enable
	-fasynchronous-unwind-tables and -funwind-tables.
	* config.gcc (riscv*-*-linux*): Define
	TARGET_DEFAULT_ASYNC_UNWIND_TABLES.

2023-01-30  YunQiang Su  <yunqiang.su@cipunited.com>

	* Makefile.in (CROSS_SYSTEM_HEADER_DIR): set according the
	value of includedir.

2023-01-30  Richard Biener  <rguenther@suse.de>

	PR ipa/108511
	* cgraph.cc (possibly_call_in_translation_unit_p): Relax
	assert.

2023-01-30  liuhongt  <hongtao.liu@intel.com>

	* config/i386/i386.opt: Change AVX512FP16 to AVX512-FP16.
	* doc/invoke.texi: Ditto.

2023-01-29  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-utils.cc: Include calls.h, cfgloop.h and cfganal.h
	(stmt_may_terminate_function_p): If assuming return or EH
	volatile asm is safe.
	(find_always_executed_bbs): Fix handling of terminating BBS and
	infinite loops; add debug output.
	* tree-ssa-alias.cc (stmt_kills_ref_p): Fix debug output

2023-01-28  Philipp Tomsich  <philipp.tomsich@vrull.eu>

	* config/aarch64/aarch64.cc (aarch64_uxt_size): fix an
	off-by-one in checking the permissible shift-amount.

2023-01-28  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/extend.texi (Named Address Spaces): Update link to the
	AVR-Libc manual.

2023-01-28  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/standards.texi (Standards): Fix markup.

2023-01-28  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/standards.texi (Standards): Update link to Objective-C book.

2023-01-28  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/invoke.texi (Instrumentation Options): Update reference to
	AddressSanitizer.

2023-01-28  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/standards.texi: Update Go1 link.

2023-01-28  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/predicates.md (pmode_reg_or_0_operand): New predicate.
	* config/riscv/riscv-vector-builtins-bases.cc (class loadstore):
	Support vlse/vsse.
	(BASE): Ditto.
	* config/riscv/riscv-vector-builtins-bases.h: Ditto.
	* config/riscv/riscv-vector-builtins-functions.def (vlse): New class.
	(vsse): New class.
	* config/riscv/riscv-vector-builtins.cc
	(function_expander::use_contiguous_load_insn): Support vlse/vsse.
	* config/riscv/vector.md (@pred_strided_load<mode>): New md pattern.
	(@pred_strided_store<mode>): Ditto.

2023-01-28  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/vector.md (tail_policy_op_idx): Remove.
	(mask_policy_op_idx): Remove.
	(avl_type_op_idx): Remove.

2023-01-27  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/96373
	* tree.h (sign_mask_for): Declare.
	* tree.cc (sign_mask_for): New function.
	(signed_or_unsigned_type_for): For vector types, try to use the
	related_int_vector_mode.
	* genmatch.cc (commutative_op): Handle conditional internal functions.
	* match.pd: Fold an IFN_COND_MUL+copysign into an IFN_COND_XOR+and.

2023-01-27  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.cc (vector_costs::compare_inside_loop_cost):
	Use the likely minimum VF when bounding the denominators to
	the estimated number of iterations.

2023-01-27  Richard Biener  <rguenther@suse.de>

	PR target/55522
	* doc/invoke.texi (-shared): Clarify effect on -ffast-math
	and -Ofast FP environment side-effects.

2023-01-27  Richard Biener  <rguenther@suse.de>

	PR target/55522
	* config/mips/gnu-user.h (GNU_USER_TARGET_MATHFILE_SPEC):
	Don't add crtfastmath.o for -shared.

2023-01-27  Richard Biener  <rguenther@suse.de>

	PR target/55522
	* config/ia64/linux.h (ENDFILE_SPEC): Don't add crtfastmath.o
	for -shared.

2023-01-27  Richard Biener  <rguenther@suse.de>

	PR target/55522
	* config/alpha/linux.h (ENDFILE_SPEC): Don't add
	crtfastmath.o for -shared.

2023-01-27  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/108306
	* range-op.cc (operator_lshift::fold_range): Return [0, 0] not
	varying for shifts that are always out of void range.
	(operator_rshift::fold_range): Return [0, 0] not
	varying for shifts that are always out of void range.

2023-01-27  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/108447
	* gimple-range-fold.cc (old_using_range::relation_fold_and_or):
	Do not attempt to fold HONOR_NAN types.

2023-01-27  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vector-builtins-shapes.cc (struct loadstore_def):
	Remove _m suffix for "vop_m" C++ overloaded API name.

2023-01-27  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vector-builtins-bases.cc (BASE): Add vlm/vsm support.
	* config/riscv/riscv-vector-builtins-bases.h: Ditto.
	* config/riscv/riscv-vector-builtins-functions.def (vlm): New define.
	(vsm): Ditto.
	* config/riscv/riscv-vector-builtins-shapes.cc (struct loadstore_def): Add vlm/vsm support.
	* config/riscv/riscv-vector-builtins-types.def (DEF_RVV_B_OPS): Ditto.
	(vbool64_t): Ditto.
	(vbool32_t): Ditto.
	(vbool16_t): Ditto.
	(vbool8_t): Ditto.
	(vbool4_t): Ditto.
	(vbool2_t): Ditto.
	(vbool1_t): Ditto.
	* config/riscv/riscv-vector-builtins.cc (DEF_RVV_B_OPS): Ditto.
	(rvv_arg_type_info::get_tree_type): Ditto.
	(function_expander::use_contiguous_load_insn): Ditto.
	* config/riscv/vector.md (@pred_store<mode>): Ditto.

2023-01-27  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vsetvl.cc (vsetvl_insn_p): Add condition to avoid ICE.
	(vsetvl_discard_result_insn_p): New function.
	(reg_killed_by_bb_p): rename to find_reg_killed_by.
	(find_reg_killed_by): New name.
	(get_vl): allow it to be called by more functions.
	(has_vsetvl_killed_avl_p): Add condition.
	(get_avl): allow it to be called by more functions.
	(insn_should_be_added_p): New function.
	(get_all_nonphi_defs): Refine function.
	(get_all_sets): Ditto.
	(get_same_bb_set): New function.
	(any_insn_in_bb_p): Ditto.
	(any_set_in_bb_p): Ditto.
	(get_vl_vtype_info): Add VLMAX forward optimization.
	(source_equal_p): Fix issues.
	(extract_single_source): Refine.
	(avl_info::multiple_source_equal_p): New function.
	(avl_info::operator==): Adjust for final version.
	(vl_vtype_info::operator==): Ditto.
	(vl_vtype_info::same_avl_p): Ditto.
	(vector_insn_info::parse_insn): Ditto.
	(vector_insn_info::available_p): New function.
	(vector_insn_info::merge): Adjust for final version.
	(vector_insn_info::dump): Add hard_empty.
	(pass_vsetvl::hard_empty_block_p): New function.
	(pass_vsetvl::backward_demand_fusion): Adjust for final version.
	(pass_vsetvl::forward_demand_fusion): Ditto.
	(pass_vsetvl::demand_fusion): Ditto.
	(pass_vsetvl::cleanup_illegal_dirty_blocks): New function.
	(pass_vsetvl::compute_local_properties): Adjust for final version.
	(pass_vsetvl::can_refine_vsetvl_p): Ditto.
	(pass_vsetvl::refine_vsetvls): Ditto.
	(pass_vsetvl::commit_vsetvls): Ditto.
	(pass_vsetvl::propagate_avl): New function.
	(pass_vsetvl::lazy_vsetvl): Adjust for new version.
	* config/riscv/riscv-vsetvl.h (enum def_type): New enum.

2023-01-27  Jakub Jelinek  <jakub@redhat.com>

	PR other/108560
	* doc/extend.texi: Fix up return type of __builtin_va_arg_pack_len
	from size_t to int.

2023-01-27  Jakub Jelinek  <jakub@redhat.com>

	PR ipa/106061
	* cgraph.cc (cgraph_edge::verify_corresponds_to_fndecl): Allow
	redirection of calls to __builtin_trap in addition to redirection
	to __builtin_unreachable.

2023-01-27  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vsetvl.cc (before_p): Fix bug.

2023-01-27  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vsetvl.cc (gen_vsetvl_pat): Refine function args.
	(emit_vsetvl_insn): Ditto.

2023-01-27  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/vector.md: Fix constraints.

2023-01-27  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/vector-iterators.md: Add TARGET_MIN_VLEN > 32 predicates.

2023-01-27  Patrick Palka  <ppalka@redhat.com>
	    Jakub Jelinek  <jakub@redhat.com>

	* tree-core.h (tree_code_type, tree_code_length): For
	C++17 and later, add inline keyword, otherwise don't define
	the arrays, but declare extern arrays.
	* tree.cc (tree_code_type, tree_code_length): Define these
	arrays for C++14 and older.

2023-01-27  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vsetvl.h: Change it into public.

2023-01-27  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-passes.def (INSERT_PASS_BEFORE): Reorder VSETVL
	pass.

2023-01-27  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vsetvl.cc (pass_vsetvl::execute): Always call split_all_insns.

2023-01-27  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/vector.md: Fix incorrect attributes.

2023-01-27  Richard Biener  <rguenther@suse.de>

	PR target/55522
	* config/loongarch/gnu-user.h (GNU_USER_TARGET_MATHFILE_SPEC):
	Don't add crtfastmath.o for -shared.

2023-01-27  Alexandre Oliva  <oliva@gnu.org>

	* doc/options.texi (option, RejectNegative): Mention that
	-g-started options are also implicitly negatable.

2023-01-26  Kito Cheng  <kito.cheng@sifive.com>

	* config/riscv/riscv-vector-builtins.cc (register_builtin_types):
	Use get_typenode_from_name to get fixed-width integer type
	nodes.
	* config/riscv/riscv-vector-builtins.def: Update define with
	fixed-width integer type nodes.

2023-01-26  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vsetvl.cc (same_bb_and_before_p): Remove it.
	(real_insn_and_same_bb_p): New function.
	(same_bb_and_after_or_equal_p): Remove it.
	(before_p): New function.
	(reg_killed_by_bb_p): Ditto.
	(has_vsetvl_killed_avl_p): Ditto.
	(get_vl): Move location so that we can call it.
	(anticipatable_occurrence_p): Fix issue of AVL=REG support.
	(available_occurrence_p): Ditto.
	(dominate_probability_p): Remove it.
	(can_backward_propagate_p): Remove it.
	(get_all_nonphi_defs): New function.
	(get_all_predecessors): Ditto.
	(any_insn_in_bb_p): Ditto.
	(insert_vsetvl): Adjust AVL REG.
	(source_equal_p): New function.
	(extract_single_source): Ditto.
	(avl_info::single_source_equal_p): Ditto.
	(avl_info::operator==): Adjust for AVL=REG.
	(vl_vtype_info::same_avl_p): Ditto.
	(vector_insn_info::set_demand_info): Remove it.
	(vector_insn_info::compatible_p): Adjust for AVL=REG.
	(vector_insn_info::compatible_avl_p): New function.
	(vector_insn_info::merge): Adjust AVL=REG.
	(vector_insn_info::dump): Ditto.
	(pass_vsetvl::merge_successors): Remove it.
	(enum fusion_type): New enum.
	(pass_vsetvl::get_backward_fusion_type): New function.
	(pass_vsetvl::backward_demand_fusion): Adjust for AVL=REG.
	(pass_vsetvl::forward_demand_fusion): Ditto.
	(pass_vsetvl::demand_fusion): Ditto.
	(pass_vsetvl::prune_expressions): Ditto.
	(pass_vsetvl::compute_local_properties): Ditto.
	(pass_vsetvl::cleanup_vsetvls): Ditto.
	(pass_vsetvl::commit_vsetvls): Ditto.
	(pass_vsetvl::init): Ditto.
	* config/riscv/riscv-vsetvl.h (enum fusion_type): New enum.
	(enum merge_type): New enum.

2023-01-26  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vsetvl.cc
	(vector_infos_manager::vector_infos_manager): Add probability.
	(vector_infos_manager::dump): Ditto.
	(pass_vsetvl::compute_probabilities): Ditto.
	* config/riscv/riscv-vsetvl.h (struct vector_block_info): Ditto.

2023-01-26  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vsetvl.cc (vector_insn_info::operator==): Remove dirty_pat.
	(vector_insn_info::merge): Ditto.
	(vector_insn_info::dump): Ditto.
	(pass_vsetvl::merge_successors): Ditto.
	(pass_vsetvl::backward_demand_fusion): Ditto.
	(pass_vsetvl::forward_demand_fusion): Ditto.
	(pass_vsetvl::commit_vsetvls): Ditto.
	* config/riscv/riscv-vsetvl.h: Ditto.

2023-01-26  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vsetvl.cc (add_label_notes): Rename insn to
	rinsn.

2023-01-26  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vsetvl.cc (pass_vsetvl::backward_demand_fusion): Refine codes.

2023-01-26  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vsetvl.cc (pass_vsetvl::forward_demand_fusion):
	Add pre-check for redundant flow.

2023-01-26  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vsetvl.cc (vector_infos_manager::create_bitmap_vectors): New function.
	(vector_infos_manager::free_bitmap_vectors): Ditto.
	(pass_vsetvl::pre_vsetvl): Adjust codes.
	* config/riscv/riscv-vsetvl.h: New function declaration.

2023-01-26  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vsetvl.cc (can_backward_propagate_p): Fix for null iter_bb.
	(vector_insn_info::set_demand_info): New function.
	(pass_vsetvl::emit_local_forward_vsetvls): Adjust for refinement of Phase 3.
	(pass_vsetvl::merge_successors): Ditto.
	(pass_vsetvl::compute_global_backward_infos): Ditto.
	(pass_vsetvl::backward_demand_fusion): Ditto.
	(pass_vsetvl::forward_demand_fusion): Ditto.
	(pass_vsetvl::demand_fusion): New function.
	(pass_vsetvl::lazy_vsetvl): Adjust for refinement of phase 3.
	* config/riscv/riscv-vsetvl.h: New function declaration.

2023-01-26  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vsetvl.cc (vector_insn_info::operator>=): Fix available condition.

2023-01-26  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vsetvl.cc (change_vsetvl_insn): New function.
	(pass_vsetvl::compute_global_backward_infos): Simplify codes.

2023-01-26  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vsetvl.cc (loop_basic_block_p): Adjust function.
	(backward_propagate_worthwhile_p): Fix non-worthwhile.

2023-01-26  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vsetvl.cc (change_insn): Adjust in_group in validate_change.

2023-01-26  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vsetvl.cc (vector_infos_manager::all_same_avl_p): New function.
	(pass_vsetvl::can_refine_vsetvl_p): Add AVL check.
	(pass_vsetvl::commit_vsetvls): Ditto.
	* config/riscv/riscv-vsetvl.h: New function declaration.

2023-01-26  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/vector.md:

2023-01-26  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vector-builtins-bases.cc (class loadstore): use
	pred_store for vse.
	* config/riscv/riscv-vector-builtins.cc
	(function_expander::add_mem_operand): Refine function.
	(function_expander::use_contiguous_load_insn): Adjust new
	implementation.
	(function_expander::use_contiguous_store_insn): Ditto.
	* config/riscv/riscv-vector-builtins.h: Refine function.
	* config/riscv/vector.md (@pred_store<mode>): New pattern.

2023-01-26  Ju-Zhe Zhong  <juzhe.zhong@rivai.ai>

	* config/riscv/riscv-vector-builtins.cc: Change to scalar pointer.

2023-01-26  Marek Polacek  <polacek@redhat.com>

	PR middle-end/108543
	* opts.cc (parse_sanitizer_options): Don't always clear SANITIZE_ADDRESS
	if it was previously set.

2023-01-26  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/108540
	* range-op-float.cc (foperator_equal::fold_range): If both op1 and op2
	are singletons, use range_true even if op1 != op2
	when one range is [-0.0, -0.0] and another [0.0, 0.0].  Similarly,
	even if intersection of the ranges is empty and one has
	zero low bound and another zero high bound, use range_true_and_false
	rather than range_false.
	(foperator_not_equal::fold_range): If both op1 and op2
	are singletons, use range_false even if op1 != op2
	when one range is [-0.0, -0.0] and another [0.0, 0.0].  Similarly,
	even if intersection of the ranges is empty and one has
	zero low bound and another zero high bound, use range_true_and_false
	rather than range_true.

2023-01-26  Jakub Jelinek  <jakub@redhat.com>

	* value-relation.cc (kind_string): Add const.
	(rr_negate_table, rr_swap_table, rr_intersect_table,
	rr_union_table, rr_transitive_table): Add static const, change
	element type from relation_kind to unsigned char.
	(relation_negate, relation_swap, relation_intersect, relation_union,
	relation_transitive): Cast rr_*_table element to relation_kind.
	(relation_to_code): Add static const.
	(relation_tests): Assert VREL_LAST is smaller than UCHAR_MAX.

2023-01-26  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/108547
	* gimple-predicate-analysis.cc (value_sat_pred_p):
	Use widest_int.

2023-01-26  Siddhesh Poyarekar  <siddhesh@gotplt.org>

	PR tree-optimization/108522
	* tree-object-size.cc (compute_object_offset): Make EXPR
	argument non-const.  Call component_ref_field_offset.

2023-01-26  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64-option-extensions.def (cssc): Specify
	FEATURE_STRING field.

2023-01-26  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/sourcebuild.texi: Refer to projects as GCC and GDB.

2023-01-25  Iain Sandoe  <iain@sandoe.co.uk>

	PR modula2/102343
	PR modula2/108182
	* gcc.cc: Provide default specs for Modula-2 so that when the
	language is not built-in better diagnostics are emitted for
	attempts to use .mod or .m2i file extensions.

2023-01-25  Andrea Corallo  <andrea.corallo@arm.com>

	* config/arm/mve.md (mve_vqnegq_s<mode>): Fix spacing.

2023-01-25  Andrea Corallo  <andrea.corallo@arm.com>

	* config/arm/mve.md (mve_vqabsq_s<mode>): Fix spacing.

2023-01-25  Andrea Corallo  <andrea.corallo@arm.com>

	* config/arm/mve.md (mve_vnegq_f<mode>, mve_vnegq_s<mode>):
	Fix spacing.

2023-01-25  Andrea Corallo  <andrea.corallo@arm.com>

	* config/arm/mve.md (@mve_vclzq_s<mode>): Fix spacing.

2023-01-25  Andrea Corallo  <andrea.corallo@arm.com>

	* config/arm/mve.md (mve_vclsq_s<mode>): Fix spacing.

2023-01-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/108523
	* tree-ssa-sccvn.cc (visit_phi): Avoid using the exclusive
	backedge value for the result when using predication to
	prove equivalence.

2023-01-25  Richard Biener  <rguenther@suse.de>

	* doc/lto.texi (Command line options): Reword and update reference
	to removed lto_read_all_file_options.

2023-01-25  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.md (umax<mode>3): Separate the CNT and CSSC
	tests.

2023-01-25  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/contrib.texi: Add Jose E. Marchesi.

2023-01-25  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/108498
	* gimple-ssa-store-merging.cc (class store_operand_info):
	End coment with full stop rather than comma.
	(split_group): Likewise.
	(merged_store_group::apply_stores): Clear string_concatenation if
	start or end aren't on a byte boundary.

2023-01-25  Siddhesh Poyarekar  <siddhesh@gotplt.org>
	    Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/108522
	* tree-object-size.cc (compute_object_offset): Use
	TREE_OPERAND(ref, 2) for COMPONENT_REF when available.

2023-01-24  Takayuki 'January June' Suwa  <jjsuwa_sys3175@yahoo.co.jp>

	* config/xtensa/xtensa.md:
	Fix exit from loops detecting references before overwriting in the
	split pattern.

2023-01-24  Vladimir N. Makarov  <vmakarov@redhat.com>

	* lra-constraints.cc (get_hard_regno): Remove final_p arg.  Always
	do elimination but only for hard register.
	(operands_match_p, uses_hard_regs_p, process_alt_operands): Adjust
	calls of get_hard_regno.

2023-01-24  Stefan Schulze Frielinghaus  <stefansf@linux.ibm.com>

	* config/s390/s390-d.cc (s390_d_target_versions): Fix detection
	of CPU version.

2023-01-24  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	PR target/108177
	* config/arm/mve.md (mve_vstrbq_p_<supf><mode>, mve_vstrhq_p_fv8hf,
	mve_vstrhq_p_<supf><mode>, mve_vstrwq_p_<supf>v4si): Add memory operand
	as input operand.

2023-01-24  Xianmiao Qu  <cooper.qu@linux.alibaba.com>

	* config.gcc(csky-*-linux*): Define CSKY_ENABLE_MULTILIB
	and only include 'csky/t-csky-linux' when enable multilib.
	* config/csky/csky-linux-elf.h(SYSROOT_SUFFIX_SPEC): Don't
	define it when disable multilib.

2023-01-24  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/108500
	* dominance.h (calculate_dominance_info): Add parameter
	to indicate fast-query compute, defaulted to true.
	* dominance.cc (calculate_dominance_info): Honor
	fast-query compute parameter.
	* tree-cfgcleanup.cc (cleanup_tree_cfg_noloop): Do
	not compute the dominator fast-query DFS numbers.

2023-01-24  Eric Biggers  <ebiggers@google.com>

	PR bootstrap/90543
	* optc-save-gen.awk: Fix copy-and-paste error.

2023-01-24  Jakub Jelinek  <jakub@redhat.com>

	PR c++/108474
	* cgraphbuild.cc: Include gimplify.h.
	(record_reference): Replace VAR_DECLs with DECL_HAS_VALUE_EXPR_P with
	their corresponding DECL_VALUE_EXPR expressions after unsharing.

2023-01-24  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	PR target/108505
	* config.gcc (tm_file): Move the variable out of loop.

2023-01-24  Lulu Cheng  <chenglulu@loongson.cn>
	    Yang Yujie  <yangyujie@loongson.cn>

	PR target/107731
	* config/loongarch/loongarch.cc (loongarch_classify_address):
	Add precessint for CONST_INT.
	(loongarch_print_operand_reloc): Operand modifier 'c' is supported.
	(loongarch_print_operand): Increase the processing of '%c'.
	* doc/extend.texi: Adds documents for LoongArch operand modifiers.
	And port the public operand modifiers information to this document.

2023-01-23  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* doc/invoke.texi (-mbranch-protection): Update documentation.

2023-01-23  Richard Biener  <rguenther@suse.de>

	PR target/55522
	* config/sparc/freebsd.h (ENDFILE_SPEC): Don't add crtfastmath.o
	for -shared.
	* config/sparc/linux.h (ENDFILE_SPEC): Likewise.
	* config/sparc/linux64.h (ENDFILE_SPEC): Likewise.
	* config/sparc/sp-elf.h (ENDFILE_SPEC): Likewise.
	* config/sparc/sp64-elf.h (ENDFILE_SPEC): Likewise.

2023-01-23  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/aout.h (ra_auth_code): Add entry in enum.
	* config/arm/arm.cc (emit_multi_reg_push): Add RA_AUTH_CODE register
	to dwarf frame expression.
	(arm_emit_multi_reg_pop): Restore RA_AUTH_CODE register.
	(arm_expand_prologue): Update frame related information and reg notes
	for pac/pacbit insn.
	(arm_regno_class): Check for pac pseudo reigster.
	(arm_dbx_register_number): Assign ra_auth_code register number in dwarf.
	(arm_init_machine_status): Set pacspval_needed to zero.
	(arm_debugger_regno): Check for PAC register.
	(arm_unwind_emit_sequence): Print .save directive with ra_auth_code
	register.
	(arm_unwind_emit_set): Add entry for IP_REGNUM in switch case.
	(arm_unwind_emit): Update REG_CFA_REGISTER case._
	* config/arm/arm.h (FIRST_PSEUDO_REGISTER): Modify.
	(DWARF_PAC_REGNUM): Define.
	(IS_PAC_REGNUM): Likewise.
	(enum reg_class): Add PAC_REG entry.
	(machine_function): Add pacbti_needed state to structure.
	* config/arm/arm.md (RA_AUTH_CODE): Define.

2023-01-23  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config.gcc ($tm_file): Update variable.
	* config/arm/arm-mlib.h: Create new header file.
	* config/arm/t-rmprofile (MULTI_ARCH_DIRS_RM): Rename mbranch-protection
	multilib arch directory.
	(MULTILIB_REUSE): Add multilib reuse rules.
	(MULTILIB_MATCHES): Add multilib match rules.

2023-01-23  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm-cpus.in (cortex-m85): Define new CPU.
	* config/arm/arm-tables.opt: Regenerate.
	* config/arm/arm-tune.md: Likewise.
	* doc/invoke.texi (Arm Options): Document -mcpu=cortex-m85.
	* (-mfix-cmse-cve-2021-35465): Likewise.

2023-01-23  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/108482
	* tree-vect-generic.cc (expand_vector_operations): Fold remaining
	.LOOP_DIST_ALIAS calls.

2023-01-23  Andrea Corallo  <andrea.corallo@arm.com>

	* config.gcc (arm*-*-*): Add 'aarch-bti-insert.o' object.
	* config/arm/arm-protos.h: Update.
	* config/arm/aarch-common-protos.h: Declare
	'aarch_bti_arch_check'.
	* config/arm/arm.cc (aarch_bti_enabled) Update.
	(aarch_bti_j_insn_p, aarch_pac_insn_p, aarch_gen_bti_c)
	(aarch_gen_bti_j, aarch_bti_arch_check): New functions.
	* config/arm/arm.md (bti_nop): New insn.
	* config/arm/t-arm (PASSES_EXTRA): Add 'arm-passes.def'.
	(aarch-bti-insert.o): New target.
	* config/arm/unspecs.md (VUNSPEC_BTI_NOP): New unspec.
	* config/arm/aarch-bti-insert.cc (rest_of_insert_bti): Verify arch
	compatibility.
	(gate): Make use of 'aarch_bti_arch_check'.
	* config/arm/arm-passes.def: New file.
	* config/aarch64/aarch64.cc (aarch_bti_arch_check): New function.

2023-01-23  Andrea Corallo  <andrea.corallo@arm.com>

	* config.gcc (aarch64*-*-*): Rename 'aarch64-bti-insert.o' into
	'aarch-bti-insert.o'.
	* config/aarch64/aarch64-protos.h: Remove 'aarch64_bti_enabled'
	proto.
	* config/aarch64/aarch64.cc (aarch_bti_enabled): Rename.
	(aarch_bti_j_insn_p, aarch_pac_insn_p): New functions.
	(aarch64_output_mi_thunk)
	(aarch64_print_patchable_function_entry)
	(aarch64_file_end_indicate_exec_stack): Update renamed function
	calls to renamed functions.
	* config/aarch64/aarch64-c.cc (aarch64_update_cpp_builtins): Likewise.
	* config/aarch64/t-aarch64 (aarch-bti-insert.o): Update
	target.
	* config/aarch64/aarch64-bti-insert.cc: Delete.
	* config/arm/aarch-bti-insert.cc: New file including and
	generalizing code from aarch64-bti-insert.cc.
	* config/arm/aarch-common-protos.h: Update.

2023-01-23  Andrea Corallo  <andrea.corallo@arm.com>

	* config/arm/arm.h (arm_arch8m_main): Declare it.
	* config/arm/arm-protos.h (arm_current_function_pac_enabled_p):
	Declare it.
	* config/arm/arm.cc (arm_arch8m_main): Define it.
	(arm_option_reconfigure_globals): Set arm_arch8m_main.
	(arm_compute_frame_layout, arm_expand_prologue)
	(thumb2_expand_return, arm_expand_epilogue)
	(arm_conditional_register_usage): Update for pac codegen.
	(arm_current_function_pac_enabled_p): New function.
	(aarch_bti_enabled) New function.
	(use_return_insn): Return zero when pac is enabled.
	* config/arm/arm.md (pac_ip_lr_sp, pacbti_ip_lr_sp, aut_ip_lr_sp):
	Add new patterns.
	* config/arm/unspecs.md (UNSPEC_PAC_NOP)
	(VUNSPEC_PACBTI_NOP, VUNSPEC_AUT_NOP): Add unspecs.

2023-01-23  Andrea Corallo  <andrea.corallo@arm.com>

	* config/arm/t-rmprofile: Add multilib rules for march +pacbti and
	mbranch-protection.

2023-01-23  Andrea Corallo  <andrea.corallo@arm.com>
	    Tejas Belagod   <tbelagod@arm.com>

	* config/arm/arm.cc (arm_file_start): Emit EABI attributes for
	Tag_PAC_extension, Tag_BTI_extension, TAG_BTI_use, TAG_PACRET_use.

2023-01-23  Andrea Corallo  <andrea.corallo@arm.com>
	    Tejas Belagod   <tbelagod@arm.com>
	    Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* ginclude/unwind-arm-common.h (_Unwind_VRS_RegClass): Introduce
	new pseudo register class _UVRSC_PAC.

2023-01-23  Andrea Corallo  <andrea.corallo@arm.com>
	    Tejas Belagod   <tbelagod@arm.com>

	* config/arm/arm-c.cc (arm_cpu_builtins): Define
	__ARM_FEATURE_BTI_DEFAULT, __ARM_FEATURE_PAC_DEFAULT,
	__ARM_FEATURE_PAUTH and __ARM_FEATURE_BTI.

2023-01-23  Andrea Corallo  <andrea.corallo@arm.com>
	    Tejas Belagod   <tbelagod@arm.com>

	* doc/sourcebuild.texi: Document arm_pacbti_hw.

2023-01-23  Andrea Corallo  <andrea.corallo@arm.com>
	    Tejas Belagod   <tbelagod@arm.com>
	    Richard Earnshaw  <Richard.Earnshaw@arm.com>

	* config/arm/arm.cc (arm_configure_build_target): Parse and validate
	-mbranch-protection option and initialize appropriate data structures.
	* config/arm/arm.opt (-mbranch-protection): New option.
	* doc/invoke.texi (Arm Options): Document it.

2023-01-23  Andrea Corallo  <andrea.corallo@arm.com>
	    Tejas Belagod   <tbelagod@arm.com>

	* config/arm/arm.h (TARGET_HAVE_PACBTI): New macro.
	* config/arm/arm-cpus.in (pacbti): New feature.
	* doc/invoke.texi (Arm Options): Document it.

2023-01-23  Andrea Corallo  <andrea.corallo@arm.com>
	    Tejas Belagod   <tbelagod@arm.com>

	* common/config/aarch64/aarch64-common.cc: Include aarch-common.h.
	(all_architectures): Fix comment.
	(aarch64_parse_extension): Rename return type, enum value names.
	* config/aarch64/aarch64-c.cc (aarch64_update_cpp_builtins): Rename
	factored out aarch_ra_sign_scope and aarch_ra_sign_key variables.
	Also rename corresponding enum values.
	* config/aarch64/aarch64-opts.h (aarch64_function_type): Factor
	out aarch64_function_type and move it to common code as
	aarch_function_type in aarch-common.h.
	* config/aarch64/aarch64-protos.h: Include common types header,
	move out types aarch64_parse_opt_result and aarch64_key_type to
	aarch-common.h
	* config/aarch64/aarch64.cc: Move mbranch-protection parsing types
	and functions out into aarch-common.h and aarch-common.cc.  Fix up
	all the name changes resulting from the move.
	* config/aarch64/aarch64.md: Fix up aarch64_ra_sign_key type name change
	and enum value.
	* config/aarch64/aarch64.opt: Include aarch-common.h to import
	type move.  Fix up name changes from factoring out common code and
	data.
	* config/arm/aarch-common-protos.h: Export factored out routines to both
	backends.
	* config/arm/aarch-common.cc: Include newly factored out types.
	Move all mbranch-protection code and data structures from
	aarch64.cc.
	* config/arm/aarch-common.h: New header that declares types shared
	between aarch32 and aarch64 backends.
	* config/arm/arm-protos.h: Declare types and variables that are
	made common to aarch64 and aarch32 backends - aarch_ra_sign_key,
	aarch_ra_sign_scope and aarch_enable_bti.
	* config/arm/arm.opt (config/arm/aarch-common.h): Include header.
	(aarch_ra_sign_scope, aarch_enable_bti): Declare variable.
	* config/arm/arm.cc: Add missing includes.

2023-01-23  Tobias Burnus  <tobias@codesourcery.com>

	* doc/install.texi (amdgcn, nvptx): Require newlib 4.3.0.

2023-01-23  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/108449
	* cgraphunit.cc (check_global_declaration): Do not turn
	undefined statics into externs.

2023-01-22  Dimitar Dimitrov  <dimitar@dinux.eu>

	* config/pru/pru.h (CLZ_DEFINED_VALUE_AT_ZERO): Fix value for QI
	and HI input modes.
	* config/pru/pru.md (clz): Fix generated code for QI and HI
	input modes.

2023-01-22  Cupertino Miranda  <cupertino.miranda@oracle.com>

	* config/v850/v850.cc (v850_select_section): Put const volatile
	objects into read-only sections.

2023-01-20  Tejas Belagod  <tejas.belagod@arm.com>

	* config/aarch64/arm_neon.h (vmull_p64, vmull_high_p64, vaeseq_u8,
	vaesdq_u8, vaesmcq_u8, vaesimcq_u8): Gate under "nothing+aes".
	(vsha1*_u32, vsha256*_u32): Gate under "nothing+sha2".

2023-01-20  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/108457
	* tree-ssa-loop-niter.cc (build_cltz_expr): Use
	SCALAR_INT_TYPE_MODE (utype) directly as C[LT]Z_DEFINED_VALUE_AT_ZERO
	argument instead of a temporary.  Formatting fixes.

2023-01-19  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/108447
	* value-relation.cc (rr_union_table): Fix VREL_UNDEFINED row order.
	(relation_tests): Add self-tests for relation_{intersect,union}
	commutativity.
	* selftest.h (relation_tests): Declare.
	* function-tests.cc (test_ranges): Call it.

2023-01-19  H.J. Lu  <hjl.tools@gmail.com>

	PR target/108436
	* config/i386/i386-expand.cc (ix86_expand_builtin): Check
	invalid third argument to __builtin_ia32_prefetch.

2023-01-19  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/108459
	* omp-expand.cc (expand_omp_for_init_counts): Use fold_build1 rather
	than fold_unary for NEGATE_EXPR.

2023-01-19  Christophe Lyon  <christophe.lyon@arm.com>

	PR target/108411
	* config/aarch64/aarch64.cc (aarch64_layout_arg): Improve
	comment. Move assert about alignment a bit later.

2023-01-19  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/108440
	* tree-ssa-forwprop.cc: Include gimple-range.h.
	(simplify_rotate): For the forms with T2 wider than T and shift counts of
	Y and B - Y add & (B - 1) masking for the rotate count if Y could be equal
	to B.  For the forms with T2 wider than T and shift counts of
	Y and (-Y) & (B - 1), don't punt if range could be [B, B2], but only if
	range doesn't guarantee Y < B or Y = N * B.  If range doesn't guarantee
	Y < B, also add & (B - 1) masking for the rotate count.  Use lazily created
	pass specific ranger instead of get_global_range_query.
	(pass_forwprop::execute): Disable that ranger at the end of pass if it has
	been created.

2023-01-19  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	* config/aarch64/aarch64-simd.md (aarch64_simd_vec_set<mode>): Use
	exact_log2 (INTVAL (operands[2])) >= 0 as condition for gating
	the pattern.
	(aarch64_simd_vec_copy_lane<mode>): Likewise.
	(aarch64_simd_vec_copy_lane_<vswap_width_name><mode>): Likewise.

2023-01-19  Alexandre Oliva  <oliva@adacore.com>

	PR debug/106746
	* sched-deps.cc (sched_analyze_2): Skip cselib address lookup
	within debug insns.

2023-01-18  Martin Jambor  <mjambor@suse.cz>

	PR ipa/107944
	* cgraph.cc (cgraph_node::remove): Check whether nodes up the
	lcone_of chain also do not need the body.

2023-01-18  Richard Biener  <rguenther@suse.de>

	Revert:
	2022-12-16  Richard Biener  <rguenther@suse.de>

	PR middle-end/108086
	* tree-inline.cc (remap_ssa_name): Do not unshare the
	result from the decl_map.

2023-01-18  Murray Steele  <murray.steele@arm.com>

	PR target/108442
	* config/arm/arm_mve.h (__arm_vst1q_p_u8): Use prefixed intrinsic
	function.
	(__arm_vst1q_p_s8): Likewise.
	(__arm_vld1q_z_u8): Likewise.
	(__arm_vld1q_z_s8): Likewise.
	(__arm_vst1q_p_u16): Likewise.
	(__arm_vst1q_p_s16): Likewise.
	(__arm_vld1q_z_u16): Likewise.
	(__arm_vld1q_z_s16): Likewise.
	(__arm_vst1q_p_u32): Likewise.
	(__arm_vst1q_p_s32): Likewise.
	(__arm_vld1q_z_u32): Likewise.
	(__arm_vld1q_z_s32): Likewise.
	(__arm_vld1q_z_f16): Likewise.
	(__arm_vst1q_p_f16): Likewise.
	(__arm_vld1q_z_f32): Likewise.
	(__arm_vst1q_p_f32): Likewise.

2023-01-18  Takayuki 'January June' Suwa  <jjsuwa_sys3175@yahoo.co.jp>

	* config/xtensa/xtensa.md (xorsi3_internal):
	Rename from the original of "xorsi3".
	(xorsi3): New expansion pattern that emits addition rather than
	bitwise-XOR when the second source is a constant of -2147483648
	if TARGET_DENSITY.

2023-01-18  Kewen Lin  <linkw@linux.ibm.com>
	    Andrew Pinski  <apinski@marvell.com>

	PR target/108396
	* config/rs6000/rs6000-overload.def (VEC_VSUBCUQ): Fix typo
	vec_vsubcuqP with vec_vsubcuq.

2023-01-18  Kewen Lin  <linkw@linux.ibm.com>

	PR target/108348
	* config/rs6000/rs6000.cc (rs6000_opaque_type_invalid_use_p): Add the
	support for invalid uses of MMA opaque type in function arguments.

2023-01-18  liuhongt  <hongtao.liu@intel.com>

	PR target/55522
	* config/i386/cygwin.h (ENDFILE_SPEC): Link crtfastmath.o
	whenever -mdaz-ftz is specified. Don't link crtfastmath.o when
	-share or -mno-daz-ftz is specified.
	* config/i386/darwin.h (ENDFILE_SPEC): Ditto.
	* config/i386/mingw32.h (ENDFILE_SPEC): Ditto.

2023-01-17  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* config/bpf/bpf.cc (bpf_option_override): Disable
	-fstack-protector.

2023-01-17  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/106523
	* tree-ssa-forwprop.cc (simplify_rotate): For the
	patterns with (-Y) & (B - 1) in one operand's shift
	count and Y in another, if T2 has wider precision than T,
	punt if Y could have a value in [B, B2 - 1] range.

2023-01-16  H.J. Lu  <hjl.tools@gmail.com>

	PR target/105980
	* config/i386/i386.cc (x86_output_mi_thunk): Disable
	-mforce-indirect-call for PIC in 32-bit mode.

2023-01-16  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/106077
	* ipa-modref.cc (modref_access_analysis::analyze): Use
	find_always_executed_bbs.
	* ipa-sra.cc (process_scan_results): Likewise.
	* ipa-utils.cc (stmt_may_terminate_function_p): New function.
	(find_always_executed_bbs): New function.
	* ipa-utils.h (stmt_may_terminate_function_p): Declare.
	(find_always_executed_bbs): Declare.

2023-01-16  Jan Hubicka  <jh@suse.cz>

	* config/i386/i386.cc (ix86_vectorize_builtin_scatter): Guard scatter
	by TARGET_USE_SCATTER.
	* config/i386/i386.h (TARGET_USE_SCATTER_2PARTS,
	TARGET_USE_SCATTER_4PARTS, TARGET_USE_SCATTER): New macros.
	* config/i386/x86-tune.def (TARGET_USE_SCATTER_2PARTS,
	TARGET_USE_SCATTER_4PARTS, TARGET_USE_SCATTER): New tunes.
	(X86_TUNE_AVOID_256FMA_CHAINS, X86_TUNE_AVOID_512FMA_CHAINS): Disable
	for znver4.  (X86_TUNE_USE_GATHER): Disable for zen4.

2023-01-16  Richard Biener  <rguenther@suse.de>

	PR target/55522
	* config/sol2.h (ENDFILE_SPEC): Don't add crtfastmath.o for -shared.

2023-01-16  Stam Markianos-Wright  <stam.markianos-wright@arm.com>

	PR target/96795
	PR target/107515
	* config/arm/arm_mve.h (__ARM_mve_coerce2): Split types.
	(__ARM_mve_coerce3): Likewise.

2023-01-16  Andrew Carlotti  <andrew.carlotti@arm.com>

	* tree-ssa-loop-niter.cc (build_popcount_expr): Add IFN support.

2023-01-16  Andrew Carlotti  <andrew.carlotti@arm.com>

	* tree-ssa-loop-niter.cc (number_of_iterations_cltz): New.
	(number_of_iterations_bitcount): Add call to the above.
	(number_of_iterations_exit_assumptions): Add EQ_EXPR case for
	c[lt]z idiom recognition.

2023-01-16  Andrew Carlotti  <andrew.carlotti@arm.com>

	* doc/sourcebuild.texi: Add missing target attributes.

2023-01-16  Andrew Carlotti  <andrew.carlotti@arm.com>

	PR tree-optimization/94793
	* tree-scalar-evolution.cc (expression_expensive_p): Add checks
	for c[lt]z optabs.
	* tree-ssa-loop-niter.cc (build_cltz_expr): New.
	(number_of_iterations_cltz_complement): New.
	(number_of_iterations_bitcount): Add call to the above.

2023-01-16  Jonathan Wakely  <jwakely@redhat.com>

	* doc/extend.texi (Common Function Attributes): Fix grammar.

2023-01-16  Jakub Jelinek  <jakub@redhat.com>

	PR other/108413
	* config/riscv/riscv-vsetvl.h: Add space in between Copyright and (C).
	* config/riscv/riscv-vsetvl.cc: Likewise.

2023-01-16  Jakub Jelinek  <jakub@redhat.com>

	PR c++/105593
	* config/i386/xmmintrin.h (_mm_undefined_ps): Temporarily
	disable -Winit-self using pragma GCC diagnostic ignored.
	* config/i386/emmintrin.h (_mm_undefined_pd, _mm_undefined_si128):
	Likewise.
	* config/i386/avxintrin.h (_mm256_undefined_pd, _mm256_undefined_ps,
	_mm256_undefined_si256): Likewise.
	* config/i386/avx512fintrin.h (_mm512_undefined_pd,
	_mm512_undefined_ps, _mm512_undefined_epi32): Likewise.
	* config/i386/avx512fp16intrin.h (_mm_undefined_ph,
	_mm256_undefined_ph, _mm512_undefined_ph): Likewise.

2023-01-16  Kewen Lin  <linkw@linux.ibm.com>

	PR target/108272
	* config/rs6000/rs6000.cc (rs6000_opaque_type_invalid_use_p): Add the
	support for invalid uses in inline asm, factor out the checking and
	erroring to lambda function check_and_error_invalid_use.

2023-01-15  Aldy Hernandez  <aldyh@redhat.com>

	PR tree-optimization/107608
	* range-op-float.cc (range_operator_float::fold_range): Avoid
	folding into INF when flag_trapping_math.
	* value-range.h (frange::known_isinf): Return false for possible NANs.

2023-01-15  Xianmiao Qu  <cooper.qu@linux.alibaba.com>

	* config.gcc (csky-*-*): Support --with-float=softfp.

2023-01-14  Takayuki 'January June' Suwa  <jjsuwa_sys3175@yahoo.co.jp>

	* config/xtensa/xtensa-protos.h (order_regs_for_local_alloc):
	Rename to xtensa_adjust_reg_alloc_order.
	* config/xtensa/xtensa.cc (xtensa_adjust_reg_alloc_order):
	Ditto.  And also remove code to reorder register numbers for
	leaf functions, rename the tables, and adjust the allocation
	order for the call0 ABI to use register A0 more.
	(xtensa_leaf_regs): Remove.
	* config/xtensa/xtensa.h (REG_ALLOC_ORDER): Cosmetics.
	(order_regs_for_local_alloc): Rename as the above.
	(LEAF_REGISTERS, LEAF_REG_REMAP, leaf_function): Remove.

2023-01-14  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	* config/aarch64/aarch64-sve.md (aarch64_vec_duplicate_vq<mode>_le):
	Change to define_insn_and_split to fold ldr+dup to ld1rq.
	* config/aarch64/predicates.md (aarch64_sve_dup_ld1rq_operand): New.

2023-01-14  Alexandre Oliva  <oliva@adacore.com>

	* hash-table.h (is_deleted): Precheck !is_empty.
	(mark_deleted): Postcheck !is_empty.
	(copy constructor): Test is_empty before is_deleted.

2023-01-14  Alexandre Oliva  <oliva@adacore.com>

	PR target/40457
	* config/arm/arm.md (movmisaligndi): Prefer aligned SImode
	moves.

2023-01-13  Eric Botcazou  <ebotcazou@adacore.com>

	PR rtl-optimization/108274
	* function.cc (thread_prologue_and_epilogue_insns): Also update the
	DF information for calls in a few more cases.

2023-01-13  John David Anglin  <danglin@gcc.gnu.org>

	* config/pa/pa-linux.h (TARGET_SYNC_LIBCALL): Delete define.
	* config/pa/pa.cc (pa_init_libfuncs): Use MAX_SYNC_LIBFUNC_SIZE
	define.
	* config/pa/pa.h (TARGET_SYNC_LIBCALLS): Use flag_sync_libcalls.
	(MAX_SYNC_LIBFUNC_SIZE): Define.
	(TARGET_CPU_CPP_BUILTINS): Define __SOFTFP__ when soft float is
	enabled.
	* config/pa/pa.md (atomic_storeqi): Emit __atomic_exchange_1
	libcall when sync libcalls are disabled.
	(atomic_storehi, atomic_storesi, atomic_storedi): Likewise.
	(atomic_loaddi): Emit __atomic_load_8 libcall when sync libcalls
	are disabled on 32-bit target.
	* config/pa/pa.opt (matomic-libcalls): New option.
	* doc/invoke.texi (HPPA Options): Update.

2023-01-13  Alexander Monakov  <amonakov@ispras.ru>

	PR rtl-optimization/108117
	PR rtl-optimization/108132
	* sched-deps.cc (deps_analyze_insn): Do not schedule across
	calls before reload.

2023-01-13  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* common/config/arm/arm-common.cc (arm_canon_arch_option_1): Ignore cde
	options for -mlibarch.
	* config/arm/arm-cpus.in (begin cpu cortex-m55): Add cde options.
	* doc/invoke.texi (CDE): Document options for Cortex-M55 CPU.

2023-01-13  Qing Zhao  <qing.zhao@oracle.com>

	* attribs.cc (strict_flex_array_level_of): Move this function to ...
	* attribs.h (strict_flex_array_level_of): Remove the declaration.
	* gimple-array-bounds.cc (array_bounds_checker::check_array_ref):
	replace the referece to strict_flex_array_level_of with
	DECL_NOT_FLEXARRAY.
	* tree.cc (component_ref_size): Likewise.

2023-01-13  Richard Biener  <rguenther@suse.de>

	PR target/55522
	* config/arm/linux-eabi.h (ENDFILE_SPEC): Don't add
	crtfastmath.o for -shared.
	* config/arm/unknown-elf.h (STARTFILE_SPEC): Likewise.

2023-01-13  Richard Biener  <rguenther@suse.de>

	PR target/55522
	* config/aarch64/aarch64-elf-raw.h (ENDFILE_SPEC): Don't add
	crtfastmath.o for -shared.
	* config/aarch64/aarch64-freebsd.h (GNU_USER_TARGET_MATHFILE_SPEC):
	Likewise.
	* config/aarch64/aarch64-linux.h (GNU_USER_TARGET_MATHFILE_SPEC):
	Likewise.

2023-01-13  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.cc (aarch64_dwarf_frame_reg_mode): New
	function.
	(TARGET_DWARF_FRAME_REG_MODE): Define.

2023-01-13  Richard Biener  <rguenther@suse.de>

	PR target/107209
	* config/aarch64/aarch64.cc (aarch64_gimple_fold_builtin): Don't
	update EH info on the fly.

2023-01-13  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/108387
	* tree-ssa-sccvn.cc (visit_nary_op): Check for SSA_NAME
	value before inserting expression into the tables.

2023-01-12  Andrew Pinski  <apinski@marvell.com>
	    Roger Sayle  <roger@nextmovesoftware.com>

	PR tree-optimization/92342
	* match.pd ((m1 CMP m2) * d -> (m1 CMP m2) ? d : 0):
	Use tcc_comparison and :c for the multiply.
	(b & -(a CMP c) -> (a CMP c)?b:0): New pattern.

2023-01-12  Christophe Lyon  <christophe.lyon@arm.com>
	    Richard Sandiford  <richard.sandiford@arm.com>

	PR target/105549
	* config/aarch64/aarch64.cc (aarch64_function_arg_alignment):
	Check DECL_PACKED for bitfield.
	(aarch64_layout_arg): Warn when parameter passing ABI changes.
	(aarch64_function_arg_boundary): Do not warn here.
	(aarch64_gimplify_va_arg_expr): Warn when parameter passing ABI
	changes.

2023-01-12  Christophe Lyon  <christophe.lyon@arm.com>
	    Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.cc (aarch64_function_arg_alignment): Fix
	comment.
	(aarch64_layout_arg): Factorize warning conditions.
	(aarch64_function_arg_boundary): Fix typo.
	* function.cc (currently_expanding_function_start): New variable.
	(expand_function_start): Handle
	currently_expanding_function_start.
	* function.h (currently_expanding_function_start): Declare.

2023-01-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/99412
	* tree-ssa-reassoc.cc (is_phi_for_stmt): Remove.
	(swap_ops_for_binary_stmt): Remove reduction handling.
	(rewrite_expr_tree_parallel): Adjust.
	(reassociate_bb): Likewise.
	* tree-parloops.cc (build_new_reduction): Handle MINUS_EXPR.

2023-01-12  Takayuki 'January June' Suwa  <jjsuwa_sys3175@yahoo.co.jp>

	* config/xtensa/xtensa.md (ctzsi2, ffssi2):
	Rearrange the emitting codes.

2023-01-12  Takayuki 'January June' Suwa  <jjsuwa_sys3175@yahoo.co.jp>

	* config/xtensa/xtensa.md (*btrue):
	Correct value of the attribute "length" that depends on
	TARGET_DENSITY and operands, and add '?' character to the register
	constraint of the compared operand.

2023-01-12  Alexandre Oliva  <oliva@adacore.com>

	* hash-table.h (expand): Check elements and deleted counts.
	(verify): Likewise.

2023-01-11  Roger Sayle  <roger@nextmovesoftware.com>

	PR tree-optimization/71343
	* tree-ssa-sccvn.cc (visit_nary_op) <case LSHIFT_EXPR>: Make
	the value number of the expression X << C the same as the value
	number for the multiplication X * (1<<C).

2023-01-11  David Faust  <david.faust@oracle.com>

	PR target/108293
	* config/bpf/bpf.cc (bpf_print_operand): Correct handling for
	floating point modes.

2023-01-11  Eric Botcazou  <ebotcazou@adacore.com>

	PR tree-optimization/108199
	* tree-sra.cc (sra_modify_expr): Deal with reverse storage order
	for bit-field references.

2023-01-11  Kewen Lin  <linkw@linux.ibm.com>

	* config/rs6000/rs6000.cc (rs6000_option_override_internal): Make
	OPTION_MASK_P10_FUSION implicit setting honour Power10 tuning setting.
	* config/rs6000/rs6000-cpus.def (ISA_3_1_MASKS_SERVER): Remove
	OPTION_MASK_P10_FUSION.

2023-01-11  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/107767
	* tree-cfgcleanup.cc (phi_alternatives_equal): Export.
	* tree-cfgcleanup.h (phi_alternatives_equal): Declare.
	* tree-switch-conversion.cc (switch_conversion::collect):
	Count unique non-default targets accounting for later
	merging opportunities.

2023-01-11  Martin Liska  <mliska@suse.cz>

	PR middle-end/107976
	* params.opt: Limit JT params.
	* stmt.cc (emit_case_dispatch_table): Use auto_vec.

2023-01-11  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/108352
	* tree-ssa-threadbackward.cc
	(back_threader_profitability::profitable_path_p): Adjust
	heuristic that allows non-multi-way branch threads creating
	irreducible loops.
	* doc/invoke.texi (--param fsm-scale-path-blocks): Remove.
	(--param fsm-scale-path-stmts): Adjust.
	* params.opt (--param=fsm-scale-path-blocks=): Remove.
	(-param=fsm-scale-path-stmts=): Adjust description.

2023-01-11  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/108353
	* tree-ssa-propagate.cc (cfg_blocks_back, ssa_edge_worklist_back):
	Remove.
	(add_ssa_edge): Simplify.
	(add_control_edge): Likewise.
	(ssa_prop_init): Likewise.
	(ssa_prop_fini): Likewise.
	(ssa_propagation_engine::ssa_propagate): Likewise.

2023-01-11  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.md (*not<mode>): New pattern.

2023-01-11  Takayuki 'January June' Suwa  <jjsuwa_sys3175@yahoo.co.jp>

	* config/xtensa/xtensa.cc (xtensa_insn_cost):
	Let insn cost for size be obtained by applying COSTS_N_INSNS()
	to instruction length and then dividing by 3.

2023-01-10  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/106293
	* tree-ssa-dse.cc (dse_classify_store): Use a worklist to
	process degenerate PHI defs.

2023-01-10  Roger Sayle  <roger@nextmovesoftware.com>

	PR rtl-optimization/106421
	* cprop.cc (bypass_block): Check that DEST is local to this
	function (non-NULL) before calling find_edge.

2023-01-10  Martin Jambor  <mjambor@suse.cz>

	PR ipa/108110
	* ipa-param-manipulation.h (ipa_param_body_adjustments): New members
	sort_replacements, lookup_first_base_replacement and
	m_sorted_replacements_p.
	* ipa-param-manipulation.cc: Define INCLUDE_ALGORITHM.
	(ipa_param_body_adjustments::register_replacement): Set
	m_sorted_replacements_p to false.
	(compare_param_body_replacement): New function.
	(ipa_param_body_adjustments::sort_replacements): Likewise.
	(ipa_param_body_adjustments::common_initialization): Call
	sort_replacements.
	(ipa_param_body_adjustments::ipa_param_body_adjustments): Initialize
	m_sorted_replacements_p.
	(ipa_param_body_adjustments::lookup_replacement_1): Rework to use
	std::lower_bound.
	(ipa_param_body_adjustments::lookup_first_base_replacement): New
	function.
	(ipa_param_body_adjustments::modify_call_stmt): Use
	lookup_first_base_replacement.
	* omp-simd-clone.cc (ipa_simd_modify_function_body): Call
	adjustments->sort_replacements.

2023-01-10  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/108314
	* tree-vect-stmts.cc (vectorizable_condition): Do not
	perform BIT_NOT_EXPR optimization for EXTRACT_LAST_REDUCTION.

2023-01-10  Xianmiao Qu  <cooper.qu@linux.alibaba.com>

	* config/csky/csky-linux-elf.h (SYSROOT_SUFFIX_SPEC): New.

2023-01-10  Xianmiao Qu  <cooper.qu@linux.alibaba.com>

	* config/csky/csky.h (MULTILIB_DEFAULTS): Fix float abi option.

2023-01-10  Xianmiao Qu  <cooper.qu@linux.alibaba.com>

	* config/csky/csky.cc (csky_cpu_cpp_builtins): Add builtin
	defines for soft float abi.

2023-01-10  Xianmiao Qu  <cooper.qu@linux.alibaba.com>

	* config/csky/csky.md (smart_bseti): Change condition to CSKY_ISA_FEATURE (E1).
	(smart_bclri): Likewise.
	(fast_bseti): Change condition to CSKY_ISA_FEATURE (E2).
	(fast_bclri): Likewise.
	(fast_cmpnesi_i): Likewise.
	(*fast_cmpltsi_i): Likewise.
	(*fast_cmpgeusi_i): Likewise.

2023-01-10  Xianmiao Qu  <cooper.qu@linux.alibaba.com>

	* config/csky/csky_insn_fpuv3.md (l<frm_pattern><fixsuop><mode>si2): Test
	flag_fp_int_builtin_inexact || !flag_trapping_math.
	(<frm_pattern><mode>2): Likewise.

2023-01-10  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.cc (s390_register_info): Check call_used_regs
	instead of hard-coding the register numbers for call saved
	registers.
	(s390_optimize_register_info): Likewise.

2023-01-09  Eric Botcazou  <ebotcazou@adacore.com>

	* doc/gm2.texi (Overview): Fix @node markers.
	(Using): Likewise.  Remove subsections that were moved to Overview
	from the menu and move others around.

2023-01-09  Richard Biener  <rguenther@suse.de>

	PR middle-end/108209
	* genmatch.cc (commutative_op): Fix return value for
	user-id with non-commutative first replacement.

2023-01-09  Jakub Jelinek  <jakub@redhat.com>

	PR target/107453
	* calls.cc (expand_call): For calls with
	TYPE_NO_NAMED_ARGS_STDARG_P (funtype) use zero for n_named_args.
	Formatting fix.

2023-01-09  Richard Biener  <rguenther@suse.de>

	PR middle-end/69482
	* cfgexpand.cc (discover_nonconstant_array_refs_r): Volatile
	qualified accesses also force objects to memory.

2023-01-09  Martin Liska  <mliska@suse.cz>

	PR lto/108330
	* lto-cgraph.cc (compute_ltrans_boundary): Do not insert
	NULL (deleleted value) to a hash_set.

2023-01-08  Takayuki 'January June' Suwa  <jjsuwa_sys3175@yahoo.co.jp>

	* config/xtensa/xtensa.md (*splice_bits):
	New insn_and_split pattern.

2023-01-07  Takayuki 'January June' Suwa  <jjsuwa_sys3175@yahoo.co.jp>

	* config/xtensa/xtensa.cc
	(xtensa_split_imm_two_addends, xtensa_emit_add_imm):
	New helper functions.
	(xtensa_set_return_address, xtensa_output_mi_thunk):
	Change to use the helper function.
	(xtensa_emit_adjust_stack_ptr): Ditto.
	And also change to try reusing the content of scratch register
	A9 if the register is not modified in the function body.

2023-01-07  LIU Hao  <lh_mouse@126.com>

	PR middle-end/108300
	* config/xtensa/xtensa-dynconfig.c: Define `WIN32_LEAN_AND_MEAN`
	before <windows.h>.
	* diagnostic-color.cc: Likewise.
	* plugin.cc: Likewise.
	* prefix.cc: Likewise.

2023-01-06  Joseph Myers  <joseph@codesourcery.com>

	* doc/extend.texi (__builtin_tgmath): Do not restate standard rule
	for handling real integer types.

2023-01-06  Tamar Christina  <tamar.christina@arm.com>

	Revert:
	2022-12-12  Tamar Christina  <tamar.christina@arm.com>

	* config/aarch64/aarch64-simd.md (*aarch64_simd_movv2hf): New.
	(mov<mode>, movmisalign<mode>, aarch64_dup_lane<mode>,
	aarch64_store_lane0<mode>, aarch64_simd_vec_set<mode>,
	@aarch64_simd_vec_copy_lane<mode>, vec_set<mode>,
	reduc_<optab>_scal_<mode>, reduc_<fmaxmin>_scal_<mode>,
	aarch64_reduc_<optab>_internal<mode>, aarch64_get_lane<mode>,
	vec_init<mode><Vel>, vec_extract<mode><Vel>): Support V2HF.
	(aarch64_simd_dupv2hf): New.
	* config/aarch64/aarch64.cc (aarch64_classify_vector_mode):
	Add E_V2HFmode.
	* config/aarch64/iterators.md (VHSDF_P): New.
	(V2F, VMOVE, nunits, Vtype, Vmtype, Vetype, stype, VEL,
	Vel, q, vp): Add V2HF.
	* config/arm/types.md (neon_fp_reduc_add_h): New.

2023-01-06  Martin Liska  <mliska@suse.cz>

	PR middle-end/107966
	* doc/options.texi: Fix Var documentation in internal manual.

2023-01-05  Roger Sayle  <roger@nextmovesoftware.com>

	Revert:
	2023-01-03  Roger Sayle  <roger@nextmovesoftware.com>

	* config/i386/i386-expand.cc (ix86_expand_int_movcc): Rewrite
	RTL expansion to allow condition (mask) to be shared/reused,
	by avoiding overwriting pseudos and adding REG_EQUAL notes.

2023-01-05  Iain Sandoe  <iain@sandoe.co.uk>

	* common.opt: Add -static-libgm2.
	* config/darwin.h (LINK_SPEC): Handle static-libgm2.
	* doc/gm2.texi: Document static-libgm2.
	* gcc.cc (driver_handle_option): Allow static-libgm2.

2023-01-05  Tejas Joshi  <TejasSanjay.Joshi@amd.com>

	* common/config/i386/i386-common.cc (processor_alias_table):
	Use CPU_ZNVER4 for znver4.
	* config/i386/i386.md: Add znver4.md.
	* config/i386/znver4.md: New.

2023-01-04  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/108253
	* tree-vrp.cc (maybe_set_nonzero_bits): Handle var with pointer
	types.

2023-01-04  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/108237
	* generic-match-head.cc: Include tree-pass.h.
	(canonicalize_math_p, optimize_vectors_before_lowering_p): Define
	to false if cfun and cfun->curr_properties has PROP_gimple_opt_math
	resp. PROP_gimple_lvec property set.

2023-01-04  Jakub Jelinek  <jakub@redhat.com>

	PR sanitizer/108256
	* convert.cc (do_narrow): Punt for MULT_EXPR if original
	type doesn't wrap around and -fsanitize=signed-integer-overflow
	is on.
	* fold-const.cc (fold_unary_loc) <CASE_CONVERT>: Likewise.

2023-01-04  Hu, Lin1  <lin1.hu@intel.com>

	* common/config/i386/cpuinfo.h (get_intel_cpu): Handle Emeraldrapids.
	* common/config/i386/i386-common.cc: Add Emeraldrapids.

2023-01-04  Hu, Lin1  <lin1.hu@intel.com>

	* common/config/i386/cpuinfo.h (get_intel_cpu): Remove case 0xb5
	for meteorlake.

2023-01-03  Sandra Loosemore  <sandra@codesourcery.com>

	* cgraph.h (struct cgraph_node): Add gc_candidate bit, modify
	default constructor to initialize it.
	* cgraphunit.cc (expand_all_functions): Save gc_candidate functions
	for last and iterate to handle recursive calls.  Delete leftover
	candidates at the end.
	* omp-simd-clone.cc (simd_clone_create): Set gc_candidate bit
	on local clones.
	* tree-vect-stmts.cc (vectorizable_simd_clone_call): Clear
	gc_candidate bit when a clone is used.

2023-01-03  Florian Weimer  <fweimer@redhat.com>

	Revert:
	2023-01-02  Florian Weimer  <fweimer@redhat.com>

	* dwarf2cfi.cc (init_return_column_size): Remove.
	(init_one_dwarf_reg_size): Adjust.
	(generate_dwarf_reg_sizes): New function.  Extracted
	from expand_builtin_init_dwarf_reg_sizes.
	(expand_builtin_init_dwarf_reg_sizes): Call
	generate_dwarf_reg_sizes.
	* target.def (init_dwarf_reg_sizes_extra): Adjust
	hook signature.
	* config/msp430/msp430.cc
	(msp430_init_dwarf_reg_sizes_extra): Adjust.
	* config/rs6000/rs6000.cc
	(rs6000_init_dwarf_reg_sizes_extra): Likewise.
	* doc/tm.texi: Update.

2023-01-03  Florian Weimer  <fweimer@redhat.com>

	Revert:
	2023-01-02  Florian Weimer  <fweimer@redhat.com>

	* debug.h (dwarf_reg_sizes_constant): Declare.
	* dwarf2cfi.cc (dwarf_reg_sizes_constant): New function.

2023-01-03  Siddhesh Poyarekar  <siddhesh@gotplt.org>

	PR tree-optimization/105043
	* doc/extend.texi (Object Size Checking): Split out into two
	subsections and mention _FORTIFY_SOURCE.

2023-01-03  Roger Sayle  <roger@nextmovesoftware.com>

	* config/i386/i386-expand.cc (ix86_expand_int_movcc): Rewrite
	RTL expansion to allow condition (mask) to be shared/reused,
	by avoiding overwriting pseudos and adding REG_EQUAL notes.

2023-01-03  Roger Sayle  <roger@nextmovesoftware.com>

	PR target/108229
	* config/i386/i386-features.cc
	(general_scalar_chain::compute_convert_gain) <case PLUS>: Consider
	the gain/cost of converting a MEM operand.

2023-01-03  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/108264
	* expr.cc (store_expr): For stores into SUBREG_PROMOTED_* targets
	from source which doesn't have scalar integral mode first convert
	it to outer_mode.

2023-01-03  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/108263
	* cfgrtl.cc (fixup_reorder_chain): Avoid trying to redirect
	asm goto to EXIT.

2023-01-02  Alexander Monakov  <amonakov@ispras.ru>

	PR target/87832
	* config/i386/lujiazui.md (lujiazui_div): New automaton.
	(lua_div): New unit.
	(lua_idiv_qi): Correct unit in the reservation.
	(lua_idiv_qi_load): Ditto.
	(lua_idiv_hi): Ditto.
	(lua_idiv_hi_load): Ditto.
	(lua_idiv_si): Ditto.
	(lua_idiv_si_load): Ditto.
	(lua_idiv_di): Ditto.
	(lua_idiv_di_load): Ditto.
	(lua_fdiv_SF): Ditto.
	(lua_fdiv_SF_load): Ditto.
	(lua_fdiv_DF): Ditto.
	(lua_fdiv_DF_load): Ditto.
	(lua_fdiv_XF): Ditto.
	(lua_fdiv_XF_load): Ditto.
	(lua_ssediv_SF): Ditto.
	(lua_ssediv_load_SF): Ditto.
	(lua_ssediv_V4SF): Ditto.
	(lua_ssediv_load_V4SF): Ditto.
	(lua_ssediv_V8SF): Ditto.
	(lua_ssediv_load_V8SF): Ditto.
	(lua_ssediv_SD): Ditto.
	(lua_ssediv_load_SD): Ditto.
	(lua_ssediv_V2DF): Ditto.
	(lua_ssediv_load_V2DF): Ditto.
	(lua_ssediv_V4DF): Ditto.
	(lua_ssediv_load_V4DF): Ditto.

2023-01-02  Florian Weimer  <fweimer@redhat.com>

	* debug.h (dwarf_reg_sizes_constant): Declare.
	* dwarf2cfi.cc (dwarf_reg_sizes_constant): New function.

2023-01-02  Florian Weimer  <fweimer@redhat.com>

	* dwarf2cfi.cc (init_return_column_size): Remove.
	(init_one_dwarf_reg_size): Adjust.
	(generate_dwarf_reg_sizes): New function.  Extracted
	from expand_builtin_init_dwarf_reg_sizes.
	(expand_builtin_init_dwarf_reg_sizes): Call
	generate_dwarf_reg_sizes.
	* target.def (init_dwarf_reg_sizes_extra): Adjust
	hook signature.
	* config/msp430/msp430.cc
	(msp430_init_dwarf_reg_sizes_extra): Adjust.
	* config/rs6000/rs6000.cc
	(rs6000_init_dwarf_reg_sizes_extra): Likewise.
	* doc/tm.texi: Update.

2023-01-02  Jakub Jelinek  <jakub@redhat.com>

	* gcc.cc (process_command): Update copyright notice dates.
	* gcov-dump.cc (print_version): Ditto.
	* gcov.cc (print_version): Ditto.
	* gcov-tool.cc (print_version): Ditto.
	* gengtype.cc (create_file): Ditto.
	* doc/cpp.texi: Bump @copying's copyright year.
	* doc/cppinternals.texi: Ditto.
	* doc/gcc.texi: Ditto.
	* doc/gccint.texi: Ditto.
	* doc/gcov.texi: Ditto.
	* doc/install.texi: Ditto.
	* doc/invoke.texi: Ditto.

2023-01-01  Roger Sayle  <roger@nextmovesoftware.com>
	    Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (extendditi2): New define_insn.
	(define_split): Use DWIH mode iterator to treat new extendditi2
	identically to existing extendsidi2_1.
	(define_peephole2): Likewise.
	(define_peephole2): Likewise.
	(define_Split): Likewise.


Copyright (C) 2023 Free Software Foundation, Inc.

Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.
