[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [pci] Implementing the PCI-CRT project using ISE 5.2 & the supplied project

To: <pci@opencores.org>
Subject: RE: [pci] Implementing the PCI-CRT project using ISE 5.2 & the supplied project
From: "Matt Schulte" <matts@commtech-fastcom.com>
Date: Mon, 16 Jun 2003 17:04:12 -0500
Importance: Normal
In-Reply-To: <16107.9090.451979.465215@hertz.ikp.physik.tu-darmstadt.de>
Reply-To: pci@opencores.org
Sender: owner-pci@opencores.org

I didn't get a chance to check this out today, but I should be able to get
to it tomorrow.


> The project found another place in the hierachy then I thought. The pathes
> need to be adapted in the project file. Please try the changed project
> appended and report error/success, so that Miha or Tadej may applyy.


--
To unsubscribe from pci mailing list please visit http://www.opencores.org/mailinglists.shtml

References:
- Re: [pci] Implementing the PCI-CRT project using ISE 5.2 & the supplied project
  - From: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>

Prev by Date: [pci] Spartan IIe xc2s300e in BGA456
Next by Date: [pci] TOP.v to TOP.sch
Prev by thread: Re: [pci] Implementing the PCI-CRT project using ISE 5.2 & the supplied project
Next by thread: RE: [pci] Implementing the PCI-CRT project using ISE 5.2 & the supplied project
Index(es):
- Date
- Thread