X Session Management Protocol X.Org Standard X Version 11, Release 6.7 Mike Wexler Kubota Pacific Computer, Inc. ABSTRACT This document specifies a protocol that facili- tates the management of groups of client applica- tions by a session manager. The session manager can cause clients to save their state, to shut down, and to be restarted into a previously saved state. This protocol is layered on top of the X.Org ICE protocol. X Window System is a trademark of The Open Group. Copyright (C) 1992, 1993, 1994, 2002 The Open Group. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documenta- tion files (the ``Software''), to deal in the Software with- out restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the fol- lowing conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PUR- POSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE X CONSOR- TIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. ii 1. Acknowledgements First I would like to thank the entire ICCCM and Intrinsics working groups for the comments and suggestions. I would like to make special thanks to the following people (in alphabetical order), Jordan Brown, Ellis Cohen, Donna Con- verse, Vania Joloboff, Stuart Marks, Ralph Mor and Bob Scheifler. 2. Definitions and Goals The purpose of the X Session Management Protocol (XSMP) is to provide a uniform mechanism for users to save and restore their sessions. A session is a group of clients, each of which has a particular state. The session is controlled by a network service called the session manager. The session manager issues commands to its clients on behalf of the user. These commands may cause clients to save their state or to terminate. It is expected that the client will save its state in such a way that the client can be restarted at a later time and resume its operation as if it had never been terminated. A client's state might include information about the file currently being edited, the current position of the insertion point within the file, or the start of an uncommitted transaction. The means by which clients are restarted is unspecified by this protocol. For purposes of this protocol, a client of the session man- ager is defined as a connection to the session manager. A client is typically, though not necessarily, a process run- ning an application program connected to an X Window System display. However, a client may be connected to more than one X display or not be connected to any X displays at all. This protocol is layered on top of the X Consortium's ICE protocol and relies on the ICE protocol to handle connection management and authentication. 3. Overview of the Protocol Clients use XSMP to register themselves with the session manager (SM). When a client starts up, it should connect to the SM. The client should remain connected for as long as it runs. A client may resign from the session by issuing the proper protocol messages before disconnecting. Termina- tion of the connection without notice will be taken as an indication that the client died unexpectedly. Clients are expected to save their state in such a way as to allow multiple instantiations of themselves to be managed independently. A unique value called a client-ID is pro- vided by the protocol for the purpose of disambiguating mul- tiple instantiations of clients. Clients may use this ID, 1 X Session Management Protocol X11, Release 6.4 for example, as part of a filename in which to store the state for a particular instantiation. The client-ID should be saved as part of the command used to restart this client (the RestartCommand) so that the client will retain the same ID after it is restarted. Certain small pieces of state might also be stored in the RestartCommand. For example, an X11 client might place a `-twoWindow' option in its RestartCommand to indicate that it should start up in two window mode when it is restarted. The client finds the network address of the SM in a system- dependent way. On POSIX systems an environment variable called SESSION_MANAGER will contain a list of network IDs. Each id will contain the transport name followed by a slash and the (transport-specific) address. A TCP/IP address would look like this: tcp/hostname:portnumber where the hostname is a fully qualified domain name. A Unix Domain address looks like this: local/hostname:path A DECnet address would look like this: decnet/nodename::objname If multiple network IDs are specified, they should be sepa- rated by commas. Rationale There was much discussion over whether the XSMP protocol should use X as the transport protocol or whether it should use its own independent trans- port. It was decided that it would use an inde- pendent protocol for several reasons. First, the Session Manager should be able to manage programs that do not maintain an X connection. Second, the X protocol is not appropriate to use as a general- purpose transport protocol. Third, a session might span multiple displays. The protocol is connection based, because there is no other way for the SM to determine reliably when clients terminate. It should be noted that this protocol introduces another single point of failure into the system. Although it is possible for clients to continue running after the SM has exited, this will proba- bly not be the case in normal practice. Normally the program that starts the SM will consider the 2 X Session Management Protocol X11, Release 6.4 session to be terminated when the SM exits (either normally or abnormally). To get around this would require some sort of ren- dezvous server that would also introduce a single point of failure. In the absence of a generally available rendezvous server, XSMP is kept simple in the hopes of making simple reliable SMs. Some clients may wish to manage the programs they start. For example, a mail program could start a text editor for editing the text of a mail message. A client that does this is a session manager itself; it should supply the clients it starts with the appropriate connection information (i.e., the SESSION_MANAGER environment variable) that specifies a connection to itself instead of to the top level session manager. Each client has associated with it a list of properties. A property set by one client is not visible to any other client. These properties are used for the client to inform the SM of the client's current state. When a client ini- tially connects to the SM, there are no properties set. 4. Data Types XSMP messages contain several types of data. Both the SM and the client always send messages in their native byte order. Thus, both sides may need to byte-swap the messages received. The need to do byte-swapping is determined at run-time by the ICE protocol. If an invalid value is specified for a field of any of the enumerated types, a BadValue error message must be sent by the receiver of the message to the sender of the message. ------------------------------------------------------------------------------------ Type Name Description ------------------------------------------------------------------------------------ BOOL False or True INTERACT_STYLE None, Errors, or Any DIALOG_TYPE Error or Normal SAVE_TYPE Global, Local, or Both CARD8 a one-byte unsigned integer CARD16 a two-byte unsigned integer CARD32 a four-byte unsigned integer ARRAY8 a sequence of CARD8s LISTofARRAY8 a sequence of ARRAY8s PROPERTY a property name (an ARRAY8), a type name, and a value of that type LISTofPROPERTY a counted collection of PROPERTYs. ------------------------------------------------------------------------------------ 3 X Session Management Protocol X11, Release 6.4 5. Protocol Setup and Message Format To start the XSMP protocol, the client sends the server an ICE ProtocolSetup message. All XSMP messages are in the standard ICE message format. The message's major opcode is assigned to XSMP by ICE at run-time. The different parties (client and SM) may be assigned different major opcodes for XSMP. Once assigned, all XSMP messages issued by this party will use the same major opcode. The message's minor opcode specifies which protocol message this message contains. 6. Client Identification String A client ID is a string of XPCS characters encoded in ISO Latin 1 (ISO 8859-1). No null characters are allowed in this string. The client ID string is used in the Register- Client and RegisterClientReply messages. Client IDs consist of the pieces described below. The ID is formed by concatenating the pieces in sequence, without sep- arator characters. All pieces are padded on the left with '0' characters so as to fill the specified length. Decimal numbers are encoded using the characters `0' through `9', and hexadecimal numbers using the characters `0' through `9' and `A' through `F'. o Version. This is currently the character `1'. o Address type and address. The address type will be one of `1' a 4-byte IPv4 address encoded as 8 hexadecimal digits `2' a 6-byte DECNET address encoded as 12 hexadecimal digits `6' a 16-byte IPv6 address encoded as 32 hexadecimal digits The address is the one of the network addresses of the machine where the session manager (not the client) is running. For example, the IP address 198.112.45.11 would be encoded as the string "C6702D0B". o Time stamp. A 13-digit decimal number specifying the number of milliseconds since 00:00:00 UTC, January 1, 1970. o Process-ID type and process-ID. The process-ID type will be one of `1' a POSIX process-ID encoded as a 10-digit decimal number. The process-ID is the process-ID of the session manager, not of a client. 4 X Session Management Protocol X11, Release 6.4 o Sequence number. This is a four-digit decimal number. It is incremented every time the session manager creates an ID. After reaching "9999" it wraps to "0000". Rationale Once a client ID has been assigned to the client, the client keeps this ID indefinitely. If the client is terminated and restarted, it will be reassigned the same ID. It is desir- able to be able to pass client IDs around from machine to machine, from user to user, and from session manager to session manager, while retaining the identity of the client. This, combined with the indefinite persistence of client IDs, means that client IDs need to be globally unique. The construction specified above will ensure that any client ID created by any user, session manager, and machine will be different from any other. 7. Protocol The protocol consists of a sequence of messages as described below. Each message type is specified by an ICE minor opcode. A given message type is sent either from a client to the session manager or from the session manager to a client; the appropriate direction is listed with each mes- sage's description. For each message type, the set of valid responses and possible error messages are listed. The ICE severity is given in parentheses following each error class. __ | RegisterClient [Client -> SM] previous-ID: ARRAY8 Valid Responses: RegisterClientReply |__ Possible Errors: BadValue (CanContinue) The client must send this message to the SM to register the client's existence. If a client is being restarted from a previous session, the previous-ID field must contain the client ID from the previous session. For new clients, pre- vious-ID should be of zero length. If previous-ID is not valid, the SM will send a BadValue error message to the client. At this point the SM reverts to the register state and waits for another RegisterClient. The client should then send a RegisterClient with a null previous-ID field. 5 X Session Management Protocol X11, Release 6.4 __ | RegisterClientReply [Client <- SM] |__ client-ID: ARRAY8 The client-ID specifies a unique identification for this client. If the client had specified an ID in the previous- ID field of the RegisterClient message, client-ID will be identical to the previously specified ID. If previous-ID was null, client-ID will be a unique ID freshly generated by the SM. The client-ID format is specified in section 6. If the client didn't supply a previous-ID field to the RegisterClient message, the SM must send a SaveYourself mes- sage with type = Local, shutdown = False, interact-style = None, and fast = False immediately after the RegisterClien- tReply. The client should respond to this like any other SaveYourself message. __ | SaveYourself [Client <- SM] type: SAVE_TYPE shutdown: BOOL interact-style: INTERACT_STYLE fast: BOOL Valid Responses: SetProperties, DeleteProperties, Get- Properties, SaveYourselfDone, SaveYourself- |__ Phase2Request, InteractRequest The SM sends this message to a client to ask it to save its state. The client writes a state file, if necessary, and, if necessary, uses SetProperties to inform the SM of how to restart it and how to discard the saved state. During this process it can, if allowed by interact-style, request per- mission to interact with the user by sending an InteractRe- quest message. After the state has been saved, or if it cannot be successfully saved, and the properties are appro- priately set, the client sends a SaveYourselfDone message. If the client wants to save additional information after all the other clients have finished changing their own state, the client should send SaveYourselfPhase2Request instead of SaveYourselfDone. The client must then freeze interaction with the user and wait until it receives a SaveComplete, Die, or a ShutdownCancelled message. If interact-style is None, the client must not interact with the user while saving state. If the interact-style is Errors, the client may interact with the user only if an error condition arises. If interact-style is Any, then the client may interact with the user for any purpose. This is done by sending an InteractRequest message. The SM will 6 X Session Management Protocol X11, Release 6.4 send an Interact message to each client that sent an InteractRequest. The client must postpone all interaction until it gets the Interact message. When the client is done interacting it should send the SM an InteractDone message. The InteractRequest message can be sent any time after a SaveYourself and before a SaveYourselfDone. Unusual circumstances may dictate multiple interactions. The client may initiate as many InteractRequest - Interact - InteractDone sequences as it needs before it sends SaveYour- selfDone. When a client receives SaveYourself and has not yet responded SaveYourselfDone to a previous SaveYourself, it must send a SaveYourselfDone and may then begin responding as appropriate to the newly received SaveYourself. The type field specifies the type of information that should be saved: Global, Local, or Both. The Local type indicates that the application must update the properties to reflect its current state, send a SaveYourselfDone and continue. Specifically it should save enough information to restore the state as seen by the user of this client. It should not affect the state as seen by other users. The Global type indicates that the user wants the client to commit all of its data to permanent, globally-accessible storage. Both indicates that the client should do both of these. If Both is specified, the client should first commit the data to permanent storage before updating its SM properties. Examples If a word processor was sent a SaveYourself with a type of Local, it could create a temporary file that included the current contents of the file, the location of the cursor, and other aspects of the current editing session. It would then update its RestartCommand property with enough informa- tion to find the temporary file, and its Discard- Command with enough information to remove it. If a word processor was sent a SaveYourself with a type of Global, it would simply save the currently edited file. If a word processor was sent a SaveYourself with a type of Both, it would first save the currently edited file. It would then create a temporary file with information such as the current position of the cursor and what file is being edited. It would then update its RestartCommand property with enough information to find the temporary file, and its DiscardCommand with enough information to remove it. 7 X Session Management Protocol X11, Release 6.4 Once the SM has send SaveYourself to a client, it can't send another SaveYourself to that client until the client either responds with a SaveYour- selfDone or the SM sends a ShutdownCancelled. Advice to Implementors If the client stores local any state in a file or similar "external" storage, it must create a dis- tinct copy in response to each SaveYourself mes- sage. It must not simply refer to a previous copy, because the SM may discard that previous saved state using a DiscardCommand without knowing that it is needed for the new checkpoint. The shutdown field specifies whether the system is being shut down. Rationale The interaction may be different depending on whether or not shutdown is set. The client must save and then must prevent interaction until it receives a SaveComplete, Die, or a ShutdownCancelled, because anything the user does after the save will be lost. The fast field specifies whether or not the client should save its state as quickly as possible. For example, if the SM knows that power is about to fail, it should set the fast field to True. __ | SaveYourselfPhase2 [Client <- SM] Valid Responses: SetProperties, DeleteProperties, Get- |__ Properties, SaveYourselfDone, InteractRequest The SM sends this message to a client that has previously sent a SaveYourselfPhase2Request message. This message informs the client that all other clients are in a fixed state and this client can save state that is associated with other clients. Rationale Clients that manager other clients (window man- agers, workspace managers, etc) need to know when all clients they are managing are idle, so that the manager can save state related to each of the 8 X Session Management Protocol X11, Release 6.4 clients without being concerned with that state changing. The client writes a state file, if necessary, and, if neces- sary, uses SetProperties to inform the SM of how to restart it and how to discard the saved state. During this process it can request permission to interact with the user by send- ing an InteractRequest message. This should only be done if an error occurs that requires user interaction to resolve. After the state has been saved, or if it cannot be success- fully saved, and the properties are appropriately set, the client sends a SaveYourselfDone message. __ | SaveYourselfRequest [Client -> SM] type: SAVE_TYPE shutdown: BOOL interact-style: INTERACT_STYLE fast: BOOL global: BOOL |__ Valid Responses: SaveYourself An application sends this to the SM to request a checkpoint. When the SM receives this request it may generate a SaveY- ourself message in response and it may leave the fields intact. Example A vendor of a UPS (Uninterruptible Power Supply) might include an SM client that would monitor the status of the UPS and generate a fast shutdown if the power is about to be lost. If global is set to True, then the resulting SaveYourself should be sent to all applications. If global is set to False, then the resulting SaveYourself should be sent to the application that sent the SaveYourselfRequest. __ | InteractRequest [Client -> SM] dialog-type: DIALOG_TYPE Valid Responses: Interact, ShutdownCancelled |__ Possible Errors: BadState (CanContinue) 9 X Session Management Protocol X11, Release 6.4 During a checkpoint or session-save operation, only one client at a time might be granted the privilege of interact- ing with the user. The InteractRequest message causes the SM to emit an Interact message at some later time if the shutdown is not cancelled by another client first. The dialog-type field specifies either Errors, indicating that the client wants to start an error dialog or Normal, meaning the client wishes to start a non-error dialog. __ | Interact [Client <- SM] Valid Responses: InteractDone |__ This message grants the client the privilege of interacting with the user. When the client is done interacting with the user it must send an InteractDone message to the SM unless a shutdown cancel is received. Advice to Implementors If a client receives a ShutdownCancelled after receiving an Interact message, but before sending a InteractDone, the client should abort the inter- action and send a SaveYourselfDone. __ | InteractDone [Client -> SM] cancel-shutdown: BOOL Valid Responses: ShutdownCancelled |__ This message is used by a client to notify the SM that it is done interacting. Setting the cancel-shutdown field to True indicates that the user has requested that the entire shutdown be cancelled. Cancel-shutdown may only be True if the corresponding SaveY- ourself message specified True for the shutdown field and Any or Errors for the interact-style field. Otherwise, can- cel-shutdown must be False. 10 X Session Management Protocol X11, Release 6.4 __ | SaveYourselfDone [Client -> SM] success: BOOL Valid Responses: SaveComplete, Die, ShutdownCancelled |__ This message is sent by a client to indicate that all of the properties representing its state have been updated. After sending SaveYourselfDone the client must wait for a SaveCom- plete, ShutdownCancelled, or Die message before changing its state. If the SaveYourself operation was successful, then the client should set the success field to True; otherwise the client should set it to False. Example If a client tries to save its state and runs out of disk space, it should return False in the suc- cess field of the SaveYourselfDone message. __ | SaveYourselfPhase2Request [Client -> SM] Valid Responses: ShutdownCancelled, SaveYourselfPhase2 |__ This message is sent by a client to indicate that it needs to be informed when all the other clients are quiescent, so it can continue its state. __ | Die [Client <- SM] |__ Valid Responses: ConnectionClosed When the SM wants a client to die it sends a Die message. Before the client dies it responds by sending a Connection- Closed message and may then close its connection to the SM at any time. __ | SaveComplete [Client <- SM] |__ Valid Responses: When the SM is done with a checkpoint, it will send each of the clients a SaveComplete message. The client is then free to change its state. 11 X Session Management Protocol X11, Release 6.4 __ |__ ShutdownCancelled [Client <- SM] The shutdown currently in process has been aborted. The client can now continue as if the shutdown had never hap- pened. If the client has not sent SaveYourselfDone yet, the client can either abort the save and send SaveYourselfDone with the success field set to False, or it can continue with the save and send a SaveYourselfDone with the success field set to reflect the outcome of the save. __ | ConnectionClosed [Client -> SM] |__ reason: LISTofARRAY8 Specifies that the client has decided to terminate. It should be immediately followed by closing the connection. The reason field specifies why the client is resigning from the session. It is encoded as an array of Compound Text strings. If the resignation is expected by the user, there will typically be zero ARRAY8s here. But if the client encountered an unexpected fatal error, the error message (which might otherwise be printed on stderr on a POSIX sys- tem) should be forwarded to the SM here, one ARRAY8 per line of the message. It is the responsibility of the SM to dis- play this reason to the user. After sending this message, the client must not send any additional XSMP messages to the SM. Advice to Implementors If additional messages are received, they should be discarded. Rationale The reason for sending the ConnectionClosed mes- sage before actually closing the connections is that some transport protocols will not provide immediate notification of connection closure. __ | SetProperties [Client -> SM] |__ properties: LISTofPROPERTY 12 X Session Management Protocol X11, Release 6.4 Sets the specified properties to the specified values. Existing properties not specified in the SetProperties mes- sage are unaffected. Some properties have predefined seman- tics. See section 11, "Predefined Properties." The protocol specification recommends that property names used for properties not defined by the standard should begin with an underscore. To prevent conflicts among organiza- tions, additional prefixes should be chosen (for example, _KPC_FAST_SAVE_OPTION). The organizational prefixes should be registered with the X Registry. The XSMP reserves all property names not beginning with an underscore for future use. __ | DeleteProperties [Client -> SM] |__ property-names: LISTofARRAY8 Removes the named properties. __ | GetProperties [Client -> SM] |__ Valid Responses: GetPropertiesReply Requests that the SM respond with the values of all the properties for this client. __ | GetPropertiesReply [Client <- SM] |__ values: LISTofPROPERTY This message is sent in reply to a GetProperties message and includes the values of all the properties. 8. Errors When the receiver of a message detects an error condition, the receiver sends an ICE error message to the sender. There are only two types of errors that are used by the XSMP: BadValue and BadState. These are both defined in the ICE protocol. Any message received out-of-sequence will generate a Bad- State error message. 13 X Session Management Protocol X11, Release 6.4 9. State Diagrams These state diagrams are designed to cover all actions of both the client and the SM. 9.1. Client State Diagram start: ICE protocol setup complete -> register register: send RegisterClient -> collect-id collect-id: receive RegisterClientReply -> idle shutdown-cancelled: send SaveYourselfDone -> idle idle: [Undoes any freeze of interaction with user.] receive Die -> die receive SaveYourself -> freeze-interaction send GetProperties -> idle receive GetPropertiesReply -> idle send SetProperties -> idle send DeleteProperties -> idle send ConnectionClosed -> connection-closed send SaveYourselfRequest -> idle die: send ConnectionClosed -> connection-closed freeze-interaction: freeze interaction with user -> save-yourself 14 X Session Management Protocol X11, Release 6.4 save-yourself: receive ShutdownCancelled -> shutdown-cancelled send SetProperties -> save-yourself send DeleteProperties -> save-yourself send GetProperties -> save-yourself receive GetPropertiesReply -> save-yourself send InteractRequest -> interact-request send SaveYourselfPhase2Request -> waiting-for-phase2 if shutdown mode: send SaveYourselfDone -> save-yourself-done otherwise: send SaveYourselfDone -> idle waiting-for-phase2: receive ShutdownCancelled -> shutdown-cancelled receive SaveYourselfPhase2 -> phase2 phase2: receive ShutdownCancelled -> shutdown-cancelled send SetProperties -> save-yourself send DeleteProperties -> save-yourself send GetProperties -> save-yourself receive GetPropertiesReply -> save-yourself send InteractRequest -> interact-request (errors only) if shutdown mode: send SaveYourselfDone -> save-yourself-done otherwise: send SaveYourselfDone -> idle interact-request: receive Interact -> interact receive ShutdownCancelled -> shutdown-cancelled interact: send InteractDone -> save-yourself receive ShutdownCancelled -> shutdown-cancelled save-yourself-done: (changing state is forbidden) receive SaveComplete -> idle receive Die -> die receive ShutdownCancelled -> idle 15 X Session Management Protocol X11, Release 6.4 connection-closed: client stops participating in session 9.2. Session Manager State Diagram start: receive ProtocolSetup -> protocol-setup protocol-setup: send ProtocolSetupReply -> register register: receive RegisterClient -> acknowledge-register acknowledge-register: send RegisterClientReply -> idle idle: receive SetProperties -> idle receive DeleteProperties -> idle receive ConnectionClosed -> start receive GetProperties -> get-properties receive SaveYourselfRequest -> save-yourself send SaveYourself -> saving-yourself save-yourself: send SaveYourself -> saving-yourself get-properties: send GetPropertiesReply -> idle saving-get-properties: send GetPropertiesReply -> saving-yourself 16 X Session Management Protocol X11, Release 6.4 saving-yourself: receive InteractRequest -> saving-yourself send Interact -> saving-yourself send ShutdownCancelled -> idle receive InteractDone -> saving-yourself receive SetProperties -> saving-yourself receive DeleteProperties -> saving-yourself receive GetProperties -> saving-get-properties receive SaveYourselfPhase2Request -> start-phase2 receive SaveYourselfDone -> save-yourself-done start-phase2: If all clients have sent either SaveYourselfPhase2Request or SaveYourselfDone: send SaveYourselfPhase2 -> phase2 else -> saving-yourself phase2: receive InteractRequest -> saving-yourself send Interact -> saving-yourself send ShutdownCancelled -> idle receive InteractDone -> saving-yourself receive SetProperties -> saving-yourself receive DeleteProperties -> saving-yourself receive GetProperties -> saving-get-properties receive SaveYourselfDone -> save-yourself-done save-yourself-done: If all clients are saved: If shutting down: send Die -> die otherwise send SaveComplete -> idle If some clients are not saved: -> saving-yourself die: SM stops accepting connections 10. Protocol Encoding 17 X Session Management Protocol X11, Release 6.4 10.1. Types BOOL 0 False 1 True INTERACT_STYLE 0 None 1 Errors 2 Any DIALOG_TYPE 0 Error 1 Normal SAVE_TYPE 0 Global 1 Local 2 Both ARRAY8 4 CARD32 length n LISTofCARD8 the array p p = pad (4 + n, 8) LISTofARRAY8 4 CARD32 count 4 unused a ARRAY8 first array b ARRAY8 second array . . . q ARRAY8 last array PROPERTY a ARRAY8 name b ARRAY8 type (XPCS encoded in Latin-1, case sensitive) c LISTofARRAY8 values LISTofPROPERTY 4 CARD32 count 4 unused a PROPERTY first property b PROPERTY second property . . . q PROPERTY last property 10.2. Messages XSMP is a sub-protocol of ICE. The major opcode is assigned at run-time by ICE and is represented here by `?'. 18 X Session Management Protocol X11, Release 6.4 To start the XSMP protocol, the client sends the server an ICE ProtocolSetup message. The protocol-name field should be specified as "XSMP", the major version of the protocol is 1, the minor version is 0. These values may change if the protocol is revised. The minor version number will be incremented if the change is compatible, otherwise the major version number will be incremented. In ProtocolReply message sent by the session manager, the XSMP protocol defines the vendor parameter as product iden- tification of the session manager, and defines the release parameter as the software release identification of the ses- sion manager. The session manager should supply this infor- mation in the ICE ProtocolReply message. RegisterClient 1 ? XSMP 1 1 opcode 2 unused 4 a/8 length of remaining data in 8-byte units a ARRAY8 previous-ID RegisterClientReply 1 ? XSMP 1 2 opcode 2 unused 4 a/8 length of remaining data in 8-byte units a ARRAY8 client-ID SaveYourself 1 ? XSMP 1 3 opcode 2 unused 4 1 length of remaining data in 8-byte units 1 SAVE_TYPE type 1 BOOL shutdown 1 INTERACT_STYLE interact-style 1 BOOL fast 4 unused SaveYourselfRequest 1 ? XSMP 1 4 opcode 2 unused 4 1 length of remaining data in 8-byte units 1 SAVE_TYPE type 1 BOOL shutdown 1 INTERACT_STYLE interact-style 1 BOOL fast 1 BOOL global 3 unused 19 X Session Management Protocol X11, Release 6.4 InteractRequest 1 ? XSMP 1 5 opcode 1 DIALOG_TYPE dialog type 1 unused 4 0 length of remaining data in 8-byte units Interact 1 ? XSMP 1 6 opcode 2 unused 4 0 length of remaining data in 8-byte units InteractDone 1 ? XSMP 1 7 opcode 1 BOOL cancel-shutdown 1 unused 4 0 length of remaining data in 8-byte units SaveYourselfDone 1 ? XSMP 1 8 opcode 1 BOOL success 1 unused 4 0 length of remaining data in 8-byte units Die 1 ? XSMP 1 9 opcode 2 unused 4 0 length of remaining data in 8-byte units ShutdownCancelled 1 ? XSMP 1 10 opcode 2 unused 4 0 length of remaining data in 8-byte units ConnectionClosed 1 ? XSMP 1 11 opcode 2 unused 4 a/8 length of remaining data in 8-byte units a LISTofARRAY8 reason SetProperties 1 ? XSMP 1 12 opcode 2 unused 4 a/8 length of remaining data in 8-byte units a LISTofPROPERTY properties 20 X Session Management Protocol X11, Release 6.4 DeleteProperties 1 ? XSMP 1 13 opcode 2 unused 4 a/8 length of remaining data in 8-byte units a LISTofARRAY8 properties GetProperties 1 ? XSMP 1 14 opcode 2 unused 4 0 length of remaining data in 8-byte units GetPropertiesReply 1 ? XSMP 1 15 opcode 2 unused 4 a/8 length of remaining data in 8-byte units a LISTofPROPERTY properties SaveYourselfPhase2Request 1 ? XSMP 1 16 opcode 2 unused 4 0 length of remaining data in 8-byte units SaveYourselfPhase2 1 ? XSMP 1 17 opcode 2 unused 4 0 length of remaining data in 8-byte units SaveComplete 1 ? XSMP 1 18 opcode 2 unused 4 0 length of remaining data in 8-byte units 11. Predefined Properties All property values are stored in a LISTofARRAY8. If the type of the property is CARD8, the value is stored as a LISTofARRAY8 with one ARRAY8 that is one byte long. That single byte contains the CARD8. If the type of the property is ARRAY8, the value is stored in the first element of a single element LISTofARRAY8. The required properties must be set each time a client con- nects with the SM. The properties must be set after the client sends RegisterClient and before the client sends SaveYourselfDone. Otherwise, the behavior of the session manager is not defined. 21 X Session Management Protocol X11, Release 6.4 Clients may set, get, and delete nonstandard properties. The lifetime of stored properties does not extend into sub- sequent sessions. ---------------------------------------------------------- Name Type Posix Type Required? ---------------------------------------------------------- CloneCommand OS-specific LISTofARRAY8 Yes CurrentDirectory OS-specific ARRAY8 No DiscardCommand OS-specific LISTofARRAY8 No* Environment OS-specific LISTofARRAY8 No ProcessID OS-specific ARRAY8 No Program OS-specific ARRAY8 Yes RestartCommand OS-specific LISTofARRAY8 Yes ResignCommand OS-specific LISTofARRAY8 No RestartStyleHint CARD8 CARD8 No ShutdownCommand OS-specific LISTofARRAY8 No UserID ARRAY8 ARRAY8 Yes ---------------------------------------------------------- * Required if any state is stored in an external repository (e.g., state file). CloneCommand This is like the RestartCommand except it restarts a copy of the application. The only difference is that the application doesn't supply its client id at register time. On POSIX systems the type should be a LISTofAR- RAY8. CurrentDirectory On POSIX-based systems specifies the value of the current directory that needs to be set up prior to starting the program and should be of type ARRAY8. DiscardCommand The discard command contains a command that when deliv- ered to the host that the client is running on (deter- mined from the connection), will cause it to discard any information about the current state. If this command is not specified, the SM will assume that all of the client's state is encoded in the RestartCommand. On POSIX systems the type should be LISTofARRAY8. Environment On POSIX based systems, this will be of type LISTofARRAY8 where the ARRAY8s alternate between environment variable name and environment variable value. ProcessID This specifies an OS-specific identifier for the process. On POSIX systems this should of type ARRAY8 and contain the return value of getpid() turned into a Latin-1 22 X Session Management Protocol X11, Release 6.4 (decimal) string. Program The name of the program that is running. On POSIX sys- tems this should be the first parameter passed to execve and should be of type ARRAY8. RestartCommand The restart command contains a command that when deliv- ered to the host that the client is running on (deter- mined from the connection), will cause the client to restart in its current state. On POSIX-based systems this is of type LISTofARRAY8 and each of the elements in the array represents an element in the argv array. This restart command should ensure that the client restarts with the specified client-ID. ResignCommand A client that sets the RestartStyleHint to RestartAnyway uses this property to specify a command that undoes the effect of the client and removes any saved state. Example A user runs xmodmap. xmodmap registers with the SM, sets RestartStyleHint to RestartAnyway, and then terminates. In order to allow the SM (at the user's request) to undo this, xmodmap would register a ResignCommand that undoes the effects of the xmodmap. RestartStyleHint If the RestartStyleHint property is present, it will con- tain the style of restarting the client prefers. If this flag isn't specified, RestartIfRunning is assumed. The possible values are as follows: --------------------------- Name Value --------------------------- RestartIfRunning 0 RestartAnyway 1 RestartImmediately 2 RestartNever 3 --------------------------- The RestartIfRunning style is used in the usual case. The client should be restarted in the next session if it is connected to the session manager at the end of the current session. 23 X Session Management Protocol X11, Release 6.4 The RestartAnyway style is used to tell the SM that the application should be restarted in the next session even if it exits before the current session is terminated. It should be noted that this is only a hint and the SM will follow the policies specified by its users in determining what applications to restart. Rationale This can be specified by a client which sup- ports (as MS-Windows clients do) a means for the user to indicate while exiting that restarting is desired. It can also be used for clients that spawn other clients and then go away, but which want to be restarted. A client that uses RestartAnyway should also set the ResignCommand and ShutdownCommand properties to commands that undo the state of the client after it exits. The RestartImmediately style is like RestartAnyway, but in addition, the client is meant to run continuously. If the client exits, the SM should try to restart it in the current session. Advice to Implementors It would be wise to sanity-check the frequency which which RestartImmediately clients are restarted, to avoid a sick client being restarted continuously. The RestartNever style specifies that the client does not wish to be restarted in the next session. Advice To Implementors This should be used rarely, if at all. It will cause the client to be silently left out of sessions when they are restarted and will prob- ably be confusing to users. ShutdownCommand This command is executed at shutdown time to clean up after a client that is no longer running but retained its state by setting RestartStyleHint to RestartAnyway. The command must not remove any saved state as the client is still part of the session. 24 X Session Management Protocol X11, Release 6.4 Example A client is run at start up time that turns on a camera. This client then exits. At session shutdown, the user wants the camera turned off. This client would set the RestartStyleHint to RestartAnyway and would register a Shutdown- Command that would turn off the camera. UserID Specifies the user's ID. On POSIX-based systems this will contain the the user's name (the pw_name field of struct passwd). 25 X Session Management Protocol X11, Release 6.4 26 X Session Management Protocol X11, Release 6.4 Table of Contents 1. Acknowledgements . . . . . . . . . . . . . . . . . 1 2. Definitions and Goals . . . . . . . . . . . . . . 1 3. Overview of the Protocol . . . . . . . . . . . . . 1 4. Data Types . . . . . . . . . . . . . . . . . . . . 3 5. Protocol Setup and Message Format . . . . . . . . 4 6. Client Identification String . . . . . . . . . . . 4 7. Protocol . . . . . . . . . . . . . . . . . . . . . 5 8. Errors . . . . . . . . . . . . . . . . . . . . . . 13 9. State Diagrams . . . . . . . . . . . . . . . . . . 14 9.1. Client State Diagram . . . . . . . . . . . . . . 14 9.2. Session Manager State Diagram . . . . . . . . . 16 10. Protocol Encoding . . . . . . . . . . . . . . . . 17 10.1. Types . . . . . . . . . . . . . . . . . . . . . 18 10.2. Messages . . . . . . . . . . . . . . . . . . . 18 11. Predefined Properties . . . . . . . . . . . . . . 21 iii